Quantitative assessment of solid oxide electrochemical doping

Quantitative analysis of metal cation doping by solid oxide electrochemical doping (SOED) has been performed under galvanostatic doping conditions. A M–β″-Al₂O₃ (M=Ag, Na) microelectrode (contact radius: about 10 μm) was used as cation source to attain a homogeneous solid–solid contact between the β″-Al₂O₃ and doping target. In Ag doping into alkali borate glass, the measured dopant amount closely matched the theoretical value. High Faraday efficiencies of above 90% were obtained. This suggests that the dopant amount can be precisely controlled on a micromole scale by the electric charge during electrolysis. On the other hand, current efficiencies of Na doping into Bi₂Sr₂CaCu₂O_y (BSCCO) ceramics depended on the applied constant current. Efficiencies of above 80% were achieved at a constant current of 10 μA (1.6 A cm⁻²). The relatively low efficiencies were explained by the saturation of BSCCO grain boundaries with Na. By contrast, excess Na was detected on the anodic surface of ceramics at a constant current of 100 μA (16 A cm⁻²). In the present study, we demonstrate that SOED enables micromole-scale control over dopant amount.     

Stereocontrol of diene polymers by topochemical polymerization of substituted benzyl muconates and their crystallization properties

We report the stereocontrol of diene polymers by the topochemical polymerization of alkoxy-substituted benzyl muconates in the solid state. A monomer stacking structure is controlled by the weak intermolecular interactions in the monomer crystals, depending on the structure and position of the alkoxy-substituent. The translational and alternating types of molecular stacking structures in a column provide diisotactic and disyndiotactic polymers, respectively, by the solid-state polymerization under UV and γ-ray irradiation. On the other hand, the meso and racemo structures of the resulting polymers are determined by the molecular symmetry of the used muconate monomers. The various substituted benzyl ester polymers are transformed into the same ethyl ester polymers with the four types of tacticities. The structure and crystallization behavior of the substituted benzyl ester polymers as well as the ethyl ester polymers have been revealed in detail. We clarify the effects of the tacticity on the crystallization property of the stereoregular polymuconates. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4952–4965, 2006     

Synthesis of silicon nitride based ceramic nanoparticles by the pyrolysis of silazane block copolymer micelles

Diblock copolymer poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane)‐block‐polystyrene (polyVSA‐b‐polySt) and triblock copolymer poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane)‐block‐polystyrene‐block‐poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane) (polyVSA‐b‐polySt‐b‐polyVSA), consisting of silazane and nonsilazane segments, were prepared by the living anionic polymerization of 1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane and styrene. PolyVSA‐b‐polySt formed micelles having a poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane) (polyVSA) core in N,N‐dimethylformamide, whereas polyVSA‐b‐polySt and polyVSA‐b‐polySt‐b‐polyVSA formed micelles having a polyVSA shell in n‐heptane. The micelles with a polyVSA core were core‐crosslinked by UV irradiation in the presence of diethoxyacetophenone as a photosensitizer, and the micelles with a polyVSA shell were shell‐crosslinked by UV irradiation in the presence of diethoxyacetophenone and 1,6‐hexanedithiol. These crosslinked micelles were pyrolyzed at 600 °C in N₂ to give spherical ceramic particles. The pyrolysis process was examined by thermogravimetry and thermogravimetry/mass spectrometry. The morphologies of the particles were analyzed by atomic force microscopy and transmission electron microscopy. The chemical composition of the pyrolysis products was analyzed by X‐ray fluorescence spectroscopy and Raman scattering spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4696–4707, 2006     

A generalization of the katona theorem for crosst-intersecting families

LetX be ann-element set and letA and? be families of subsets ofX. We say thatA and? are crosst-intersecting if |A ∩ B| ≥ t holds for all A ∈A and for allB ∈ ?. Suppose thatA and ? are crosst-intersecting. This paper first proves a crosst-intersecting version of Harper's Theorem:

1. There are two crosst-intersecting Hamming spheresA ₀,? ₀ with centerX such that |A| ≤ |A ₀| and|?| ≤ |? ₀| hold.
2. Suppose thatt ≥ 2 and that the pair of integers (|A) is maximal with respect to direct product ordering among pairs of crosst-intersecting families. Then,A and? are Hamming spheres with centerX.

Using these claims, the following conjecture of Frankl is proven:

1. Ifn + t = 2k ? 1 then |A| |?| ≤ max \(\left\{ {\left( {K_k^n + \left( {_{k - 1}^{n - 1} } \right)} \right)^2 ,K_k^n K_{k - 1}^n } \right\}\) holds, whereK _l ⁿ is defined as \(\left( {_n^n } \right)\left( {_{n - 1}^n } \right) + \cdots + \left( {_l^n } \right).\)
2. Ifn + t = 2k then |A| |? ≤ (K _k ⁿ )² holds.

The extremal configurations are also determined.     

Enhanced rectal absorption of insulin in rabbits from hollow-type suppositories containing insulin and glyceryl-1-monooctanoate.

The absorption of two kinds of insulin (from porcine or bovine pancreas) from the rectum of rabbits after the administration of hollow-type suppositories containing insulin and glyceryl-1-monooctanoate (GMO) as an absorption-enhancing agent was investigated. Two types of suppositories were employed: type I containing insulin in an aqueous solution (approx. 25 IU/mg/100 microliters citric buffer solution at pH 3.0) in the cavity of the suppository and GMO mixed with a base material (Witepsol H-15), and type II containing insulin in a crystalline form in the same amount as in type I. Without GMO, the insulin and glucose levels in plasma were unchanged, whereas a marked increase in the plasma levels of insulin and a decrease of glucose concentrations were found following coadministration of insulin and GMO by the type I suppository. Similar enhancement of rectal absorption of insulin was obtained from porcine and bovine sources. In the case of the crystalline insulin, despite the use of the same amount of GMO, porcine insulin was more efficiently absorbed than bovine insulin by the type II suppository. GMO enhances the absorption of insulin in an aqueous solution or a crystalline form, and the dissolution rate of insulin may be an important factor in the rectal absorption of insulin.     

Tris(1‐ethyl‐3‐methyl­imidazolium) hexa­chloro­lanthanate

In the title complex, (C₆H₁₁N₂)₃[LaCl₆], centrosymmetric octahedral hexa­chloro­lanthanate anions are located at the corners and face‐centers of the monoclinic unit cell. The ring H atoms of the cations interact with the Cl atoms of the anions via hydrogen bonding, and bifurcation of the hydrogen bonding is observed. Cation–cation interactions via hydrogen bonding between the ring H atoms and π‐electrons of aromatic rings are also observed as in other imidazolium salts.     

Copper(II)-catalyzed oxidation of d-alpha-tocopherol by oxygen in aqueous solution

alpha-Tocopherol (alpha-Toc) was solubilized in aqueous solutions using 13 solubilizing agents and the products of oxidation by oxygen in the presence and the absence of Cu(II) were analyzed by HPLC. In the presence of Cu(II), the oxidation was accelerated and 5-formyl-7,8-dimethyltocol and alpha-tocoquinone were the major oxidation products. Their yields greatly increased in the presence of Cu(II). The yields and the rates of formation of the products were dependent on the properties of solubilizing agents and other conditions as well as the presence of Cu(II) or other metal ions. It is suggested that slight changes in the structure of the solubilizing agents affect the course of the reaction.