Oxidizing intermediates from the sterically hindered iron salen complexes related to the oxygen activation by nonheme iron enzymes

Oxidizing intermediates are generated from nonheme iron(III) complexes to investigate the electronic structure and the reactivity, in comparison with the oxoiron(IV) porphyrin pi-cation radical (compound I) as a heme enzyme model. Sterically hindered iron salen complexes, bearing a fifth ligand Cl (1), OH(2) (2), OEt (3), and OH (4), are oxidized both electrochemically and chemically. Stepwise one-electron oxidation of 1 and 2 generates iron(III)-mono- and diphenoxyl radicals, as revealed by detailed spectroscopic investigations, including UV-vis, EPR, M?ssbauer, resonance Raman, and ESIMS spectroscopies. In contrast to the oxoiron(IV) formation from the hydroxoiron(III) porphyrin upon one-electron oxidation, the hydroxo complex 4 does not generate oxoiron(IV) species. Reaction of 2 with mCPBA also results in the formation of the iron(III)-phenoxyl radical. One-electron oxidation of 3 leads to oxidative degradation of the fifth EtO ligand to liberate acetaldehyde even at 203 K. The iron(III)-phenoxyl radical shows high reactivity for alcoxide on iron(III) but exhibits virtually no reactivity for alcohols including even benzyl alcohol without a base to remove an alcohol proton. This study explains unique properties of mononuclear nonheme enzymes with Tyr residues and also the poor epoxidation activity of Fe salen compared to Mn and Cr salen compounds.     

Determination of the proton tunneling splitting of the vinyl radical in the ground state by millimeter-wave spectroscopy combined with supersonic jet expansion and ultraviolet photolysis

The vinyl radical in the ground vibronic state produced in a supersonic jet expansion by 193 nm excimer laser photolysis of vinyl bromide was investigated by millimeter-wave spectroscopy. Due to the proton tunneling, the ground state is split into two components, of which the lower and higher ones are denoted as 0+ and 0-, respectively. Eight pure rotational transitions with Ka = 0 and 1 obeying a-type selection rules were observed for each of the 0+ and 0- states in the frequency region of 60-250 GHz. Tunneling-rotation transitions connecting the lower (0+) and upper (0-) components of the tunneling doublet, obeying b-type selection rules, were also observed in the frequency region of 190-310 GHz, including three R- and six Q-branch transitions. The observed frequencies of the pure rotational and tunneling-rotation transitions were analyzed by using an effective Hamiltonian in which the coupling between the 0+ and 0- states was taken into account. A set of precise molecular constants was obtained. Among others, the proton tunneling splitting in the ground state was determined to be DeltaE0 = 16,272(2) MHz. The potential barrier height was estimated to be 1580 cm(-1) from the proton tunneling splitting, by an analysis using a detailed one-dimensional model. The spin-rotation and hyperfine interaction constants were also determined for the 0+ and 0- states together with the off-diagonal interaction constants connecting the 0+ and 0- states, epsilonab + epsilonba for the spin-rotation interaction and Tab for the hyperfine interaction of the alpha (CH) proton. The hyperfine interaction constants, due to the alpha proton and the beta (CH2) protons, are consistent with those derived from electron spin resonance studies.     

Thionation of N‐(ω‐Halogenoalkyl)‐Substituted Amides with Lawesson's Reagent: Facile Synthesis of 4,5‐Dihydro‐1,3‐thiazoles and 5,6‐Dihydro‐4H‐1,3‐thiazines

The thionation and cyclization of N‐(ω‐halogenoalkyl)‐substituted amides (and related compounds) with Lawesson's reagent (LR=2,4‐bis(4‐methoxyphenyl)‐1,3,2,4‐dithiadiphosphetane 2,4‐disulfide) has been investigated. Treatment of the amides 1 with LR gave the corresponding thioamides 2 in moderate to good yields (Table). The latter, upon treatment with base, afforded, either in a separate step or in a one‐pot procedure, the cyclized title compounds, i.e., the 4,5‐dihydro‐1,3‐thiazoles 3 or the corresponding 5‐6‐dihydro‐4H‐thiazines 4 via dehydrohalogenation.     

Hemilabile amidomonophosphine ligand-rhodium(I) complex-catalyzed asymmetric 1,4-addition of arylboronic acids to cycloalkenones

The asymmetric 1,4-addition reaction of arylboronic acids with cycloalkenones was catalyzed by 1 mol % of an amidomonophosphine-rhodium(I) catalyst in a 10:1 mixture of 1,4-dioxane and water at 100 degrees C, affording 3-arylcycloalkanones in reasonably high enantioselectivity and high yields. It was revealed by NMR, IR, and X-ray spectroscopies that this bidentate amidomonophosphine behaves as a hemilabile ligand that contains a hard donor site in addition to the soft donor in a molecule. Phosphorus atom strongly bonds to rhodium(I), and the amide carbonyl oxygen is coordinatively labile. The reaction efficacy of phenylboronic acid with cyclopent-2-en-1-one was significantly dependent on the possibility of coordination of the amide carbonyl oxygen to rhodium(I).     

Glass microchip with three-dimensional microchannel network for 2 x 2 parallel synthesis

An integrated multireactor system for 2 x 2 parallel organic synthesis has been developed on a single glass microchip. Three-dimensional channel circuits in the chip were fabricated by laminating three glass plate layers. The fabrication method is a straightforward extension of the conventional one, and topological equivalence for any three-dimensional circuits can be constructed easily with it. 2 x 2 phase-transfer amide formation reactions, which constitute a simple model for combinatorial synthesis, were successfully carried out on the microchip, and the integrity of the three-dimensional circuits was confirmed. Combinatorial chemistry with multi-microreactors, in conjunction with a high-throughput screening method based on micro-TAS technologies, is expected to provide an efficient tool for drug discovery.     

Structural study on highly oxidized states of a water oxidation complex [RuIII(bpy)2(H2O)]2(mu-O)4+ by ruthenium K-edge X-ray absorption fine structure spectroscopy

The oxidation-induced structural change of a water-oxidizing diruthenium complex, [(bpy)(2)(H(2)O)Ru(III)(micro-O)Ru(III)(OH(2))(bpy)(2)](4+) (bpy = 2,2'-bipyridine), was investigated by means of X-ray absorption spectroscopy. Ru K-edge XANES (X-ray absorption near-edge structure) spectra from the acidic solution and solid precipitates obtained by oxidation showed that the absorption edge shifts toward higher energy with a preedge feature slightly more enhanced than those of the lower oxidation states. This indicates that the higher oxidation state has a lower symmetry due to shortening of the Ru-O bonds that originated from the water ligands. The EXAFS (extended X-ray absorption fine structure) spectra were similar to those of the lower oxidation states, whose analysis revealed the existence of short Ru-O double bonds and an almost linear Ru-O-Ru angle (169 +/- 2 degrees ). Ab initio EXAFS simulations for several possible structural models suggest that the dimeric structure is maintained during the water oxidation reaction.     

Reactions of β-heteroatom substituted α,β-unsaturated ketones with dimethylsulfonium methylide

β-Alkoxy- and β-alkylthio α,β-unsaturated ketones react with dimethylsulfonium methylide (DMSM) to give a furan, while β-anilino α,β-unsaturated ketones give the pyrrole. β,β-Bis(alkylthio) α,β-unsaturated ketones react with DMSM to afford the methylene inserted products, λ,λ-bis(alkylthio) β,λ-unsaturated ketones.     

Convenient laboratory synthesis of vinylic silicon compounds via the reactions of acetylene with hydrosilanes catalyzed by group-VIII metal phosphine complexes

The hydrosilylation of acetylene (HCCH) with trichlorosilane, triethoxysilane, methyldichlorosilane, methyldiethoxysilane and $\text{n}$-hexyldichlorosilane in an inert solvent in the presence of various phosphine complexes of Group-VIII metals such as Ru, Rh, Pd and Pt, as well as chloroplatinic acid, was investigated. Among the complexes studied, RuCL₂ (PPh₃)₃, PtCl₂ (PPh₃)₂, RhCl (PPh₃)₃, RhH(PPh₃)₄ and Pt(PPh₃)₄ were found to be the catalysts of choice for the selective syntheses of vinyltrichlorosilane, vinyltriethoxysilane, methylvinyldichlorosilane, methylvinyldiethoxysilane and $\text{n}$-hexylvinyldichlorosilane, respectively.     

A study of some new and useful n-terminal groups in mass spectrometry of peptides : The use of 3-hydroxyalkanoyl and unsaturated acyl groups

Using model peptides ranging from tri- to dodecapeptides, the utility of several new N-protecting groups, i.e., 3-hydroxyalkanoyl and δ²-acyl groups including Oct(OH), Dec(OH), Dod(OH), Myr(OH), Pal(OH), Ste(OH), Δ²-Dec, Cro, and Cin, for mass spectrometric sequence analysis were examined. Among these, the Dec(OH)- and Δ²-Dec peptide derivatives were found to be superior to the hitherto reported Ac or Dee derivatives, since they gave comparable or sometimes better mass spectra. Particularly the Dec(OH) derivatives yielded two series of sequence peaks (as doublets of 18 mass units apart) ascribable to partial dehydration of the protecting group, the fact which makes the recognition of sequence determining peaks much easier. The Cro and Cin derivatives also gave mass spectra comparable to those of the corresponding Ac or Dec ones, except in a few cases where (Pro-Pro-Gly)_2–4 were model peptides. Permethylation technique can also be effectively applied to the all new acyl derivatives for the mass spectrometric sequence studies.     

Adsorption of bismuth on hydrous lead dioxide from bismuth-edta solution

The adsorption of bismuth(III) on hydrous lead dioxide (HLD) from solutions of the bismuth(III)-EDTA complex was studied by differential pulse polarography. It was found that HLD collected bismuth quantitatively from bismuth-EDTA solution over the pH range from 1 to 12, with shaking for 1 hr, even at bismuth-EDTA concentrations as low as 10(-8)-10(-7)M. In addition, the reaction of HLD with EDTA was investigated in order to consider the participation of EDTA with respect to the adsorption behaviour of bismuth. It can be assumed that the adsorption of bismuth on HLD from bismuth-EDTA solution is correlated to the adsorptive property of HLD and to the surface redox process between HLD and EDTA.