Generation of alkoxycarbenium ion pools from thioacetals and applications to glycosylation chemistry

[reaction: see text] Alkoxycarbenium ions have been generated and accumulated as "cation pools" by the low-temperature electrochemical oxidation of alpha-phenylthioethers. Although an unsuccessful attempt to accumulate glycosyl cations was made, a one-pot method for electrochemical glycosylation, which involves anodic oxidation of thioglycosides to generate glycosyl cation equivalents followed by their reactions with glycosyl acceptors, has been developed.     

Improvement of chemical analysis of antibiotics. IX. A simple method for residual tetracyclines analysis in honey using a tandem cartridge clean-up system

A simple, rapid and precise analytical method for the residual tetracyclines in honey has been established using a tandem cartridge clean-up system (prepacked reversed-phase and ion-exchange cartridges) followed by high-performance liquid chromatography. The recoveries of oxytetracycline (OTC), tetracycline (TC), chlortetracycline (CTC) and doxycycline (DC) from honey spiked at a level of 1.0 ppm are 87.1, 85.3, 98.0 and 99.0%, respectively, with coefficients of variation of 1.1-3.9%. The detection limits in honey are 0.02 ppm for OTC and TC, and 0.05 ppm for CTC and DC, respectively. The time required for the analysis of four samples is only 1 h.     

Syntheses and Characterization of Polymetallosiloxanes from Silicic Acid and Metal Chlorides

Syntheses and characterization of polymetallosiloxanes by the non-hydrolysis sol-gel process using no metal alkoxides were investigated. The reaction of silicic acid (SA) with MCl₄ (M = Ti, Zr) in the molar ratios SA/MCl₄ = 0.5–3.0 using a tetrahydrofuran-methanol solvent formed polymetallosiloxane (PMS), which was insoluble in organic solvents regardless of the molar ratio. The PMS was isolated as esterified polymetallosiloxane by esterification with isopropyl alcohol for various periods, which were soluble in methanol, acetone, and tetrahydrofuran. The number average molecular weight was 1000–3200 for esterified polytitanosiloxane and 3400–11000 for esterified polyzirconosiloxane. Esterified polymetallosiloxanes had no melting point but decomposition point. The results of analytical data indicated that esterified polymetallosiloxane and/or polymetallosiloxane consisted of the main chain of Si–O–Si and Si–O–M linkage with the pendants of alkoxy, silanol, and chloro group.     

Preparation of dehydrated powder of hemoglobin vesicles

The carbonyl hemoglobin (CO-Hb), which was used to prevent denaturation (metHb) during the preparation of samples, was encapsulated into lipid vesicles constituted from unsaturated phospholipid, cholesterol and unsaturated fatty acid. Unsaturated components were polymerized by γ-irradiation to enhance the stability of bilayer membrane. An aqueous dispersion of resulting Hb vesicles was freeze-dried in the presence of saccharides (50–200 mM) to obtain a dehydrated powder of Hb vesicles. Change in the vesicle size, the leakage of encapsulated Hb and the oxidation of Hb to metHb were not observed. Therefore, the long-term storage of Hb vesicles can be realized as a dry powder.     

Practical synthesis of a neuropeptide Y antagonist via stereoselective addition to a ketene

[Reaction: see text]. The synthesis of neuropeptide Y antagonist 1, currently under clinical investigation for the treatment of obesity, is described. The convergent synthesis from trans-spirolactone carboxylic acid intermediate 2a and aminopyrazole 3 is predicated on a stereoselective route to the former. The coupling reaction of ethyl 4-oxocyclohexanecarboxylate (10a) with lithiated isonicotinamide 11 was investigated in detail, but even optimized conditions only provided a 45:55 ratio of trans:cis isomers (12a:12b). While selective crystallization schemes were developed to isolate the thermodynamically less stable trans isomer 2a, improved stereocontrol was subsequentially achieved by the application of ketene chemistry. The ketene formation and quench was investigated under a variety of conditions aimed at maximizing the trans:cis ratio. Reacting a mixture of carboxylic acids 2a and 2b with POCl3 in THF, followed by concomitant addition of tert-butyl alcohol in the presence of TMEDA at 35 degrees C provided a 4:1 ratio of trans:cis tert-butyl esters (18a:18b) via in situ ketene formation. Ester hydrolysis, followed by selective crystallization of undesired 2b as the HCl salt, led to isolation of 2a in 47% overall yield. Aminopyrazole intermediate 3 was synthesized via the condensation reaction of 2-fluorophenylhydrazine hydrochloride (4a) with acrylonitrile derivative 5 in 65-70% yield. Coupling of advanced intermediates 2a and 3b via activation with thionyl chloride gave a 92% yield of 1.     

Synthesis of the common left-half part of pectenotoxins

The common left-half [C31-C33(OC1-C7)-C40] part of pectenotoxins has been synthesized convergently from the C31-C35, C36-C40, and C1-C7 parts. The C31-C35 part, prepared via a new route shorter than our previous route, was coupled with the C36-C40 part through reductive lithiation and addition reactions to give an adduct stereoselectively, which was converted to a cyclic acetal corresponding to the C31-C40 part. The left-half was synthesized by a three-step process including esterification of the C31-C40 part with the C1-C7 part.     

Ligand binding properties of myoglobin reconstituted with iron porphycene: unusual O2 binding selectivity against CO binding

Sperm whale myoglobin, an oxygen storage hemoprotein, was successfully reconstituted with the iron porphycene having two propionates, 2,7-diethyl-3,6,12,17-tetramethyl-13,16-bis(carboxyethyl)porphycenatoiron. The physicochemical properties and ligand bindings of the reconstituted myoglobin were investigated. The ferric reconstituted myoglobin shows the remarkable stability against acid denaturation and only a low-spin characteristic in its EPR spectrum. The Fe(III)/Fe(II) redox potential (-190 mV vs NHE) determined by the spectroelectrochemical measurements was much lower than that of the wild-type. These results can be attributed to the strong coordination of His93 to the porphycene iron, which is induced by the nature of the porphycene ring symmetry. The O2 affinity of the ferrous reconstituted myoglobin is 2600-fold higher than that of the wild-type, mainly due to the decrease in the O2 dissociation rate, whereas the CO affinity is not so significantly enhanced. As a result, the O2 affinity of the reconstituted myoglobin exceeds its CO affinity (M' = K(CO)/K(O2) < 1). The ligand binding studies on H64A mutants support the fact that the slow O2 dissociation of the reconstituted myoglobin is primarily caused by the stabilization of the Fe-O2 sigma-bonding. The IR spectra for the carbon monoxide (CO) complex of the reconstituted myoglobin suggest several structural and/or electrostatic conformations of the Fe-C-O bond, but this is not directly correlated with the CO dissociation rate. The high O2 affinity and the unique characteristics of the myoglobin with the iron porphycene indicate that reconstitution with a synthesized heme is a useful method not only to understand the physiological function of myoglobin but also to create a tailor-made function on the protein.     

A molecular-beam study of the collision dynamics of methane and ethane upon a graphitic monolayer on Pt(111)

Utilizing a supersonic molecular-beam scattering technique, the angular intensity distributions of alkane molecules (CH4 and C2H6) have been measured, which are scattered from a chemically inert and highly oriented monolayer graphite (MG) on Pt(111). A MG which covers the Pt(111) surface with a full monolayer is found to induce a large energy loss of alkanes during collision with the surface by phonon creation due to the large mass ratio of an alkane molecule with respect to MG. Based on the classical cube model, only applicable to the molecules without internal mode excitation, the effective masses of MG of 76 (six atoms of carbon) and Pt(111) of 585 (three atoms of platinum) are determined from rare-gas atom scattering data. Despite the difference in the degree of freedom between CH4 and rare-gas atoms, CH4 scattering is found to be well described by the simple hard-cube model as a result of the high symmetry of the CH4 structure. With the recently developed ellipsoid-washboard model, an extension of the hard-cube model to include some internal mode excitation of impinging molecules in addition to the surface corrugation, it is found that unlike CH4 the cartwheel rotation mode of C2H6 is significantly excited during collision, while the helicopter mode excitation is negligible on a flat MG surface.     

Diinsertion of fluorenylidene into a sulfur-sulfur bond of diaryl disulfides

Upon irradiation (>340 nm) of a benzene solution of diazofluorene with di-p-tolyl- or di-p-anisyl disulfide, the corresponding 9,9′-bis(arylmercapto)bifluorenyl was afforded in moderate to good yield accompanied by formation of 9,9′-bis(arylmercapto)fluorene. The major reaction pathway is considered to be a disulfur ylide formation followed by two times of successive Stevens rearrangement or by concerted electron redistribution via [2,3]sigmatropic rearrangement.     

Determination of plasma protein binding of propafenone in rats, dogs and humans by highly sensitive gas chromatography-mass spectrometry

A highly sensitive method for the determination of propafenone in plasma has been established using gas chromatography-mass spectrometry with the deuterium-labelled compound as an internal standard. Plasma levels as low as 1 ng/ml were measured using 0.5-ml plasma samples. Plasma protein binding of the drug in rats, dogs and humans in vitro and in vivo was determined by the proposed method. About 90% of the drug was bound to the plasma protein in all species in vitro (20-500 ng/ml) and 69-88% in rats, 90-95% in dogs and 77-89% in humans after oral administration of the drug at doses of 50 mg/kg, 5 mg/kg and 200 mg per person, respectively.