Preparation of Sr2CeO4:Eu3+,Dy3+ white luminescence phosphor particles and thin films by using an emulsion liquid membrane system

Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) phosphor particles and thin films were prepared by using an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system, containing VA-10 (2-methyl-2-ethylheptanoic acid) as extractant (cation carrier). A two-step extraction enabled efficient extraction for Sr(3+) and rare earth ions, and the resulting precursor metal oxalate particles produced in the internal water phase of the ELM system were about 60 nm in diameter. Calcination of the oxalate particles in air gave submicrometer-sized Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) particles, which showed blue and white luminescence, respectively, by UV excitation. Blue and white luminescence phosphor thin films were also prepared by soaking alumina substrates into the W/O emulsion containing precursor oxalate particles, followed by calcination in air.     

Synthesis and analgesic activity of novel heterocycles, [1]benzothiopyrano[3,4-b]pyrrole derivatives

In order to develop analgesic compounds possessing a sulfur atom in the alicyclic ring, novel cis-fused heterocycles, [1]benzothiopyrano[3,4-b]pyrrole derivatives (II) were synthesized via a unique cyclization reaction starting from 4-(4-methoxyphenylthio)-2-butanone (1) or 6-methoxy-3,4-dihydro-2H-1-benzothiopyran-4-one (7). The analgesic effects of benzothiopyranopyrroles (16, 18) were measured by means of the writhing test. The phenolic derivative 18 completely inhibited the appearance of writhing at the dose of 50 mg/kg, but the methoxy derivative 16 had no analgesic effect.     

Asymmetric cyclization of 2-alkenylphenols. A comparative study on the use of palladium(II) and titanium(IV) complexes

The oxidative cyclization of 2-(3-pentenyl)phenol catalyzed by [(η³-pinene)PdOAc]₂ gives optically active (+)-2-vinylchroman (25% e.e.), while (−)-2-(1-hydroxyethyl)chroman (56% e.e.) is formed as a single diastereomer upon treatment with t-BuOOH in the presence of Ti(OⁱPr)₄ and -(+)-diethyl tartrate. 2-(2-Butenyl)phenol also undergoes the Ti-promoted asymmetric cyclization to give (2S,1′R)-(−)-2-(1-hydroxyethyl)-2,3-dihydrobenzofuran (29% e.e.).     

Total synthesis of brevetoxin-B

Brevetoxin-B (BTX-B), produced by the red tide organism, Gymnodium breve Davis, is the first member of marine polycyclic ethers to be structurally elucidated and one of the most potent neurotoxins. The structural feature is a trans-fused polycyclic ether ring system with 23 stereocenters. Its unique, complex structure and potent biological activity have attracted the attention of synthetic organic chemists. Total synthesis of BTX-B has been accomplished via the coupling of the ABCDEFG and IJK-ring segments, each ether ring of which was stereoselectively and efficiently constructed on the basis of SmI2-induced intramolecular cyclization, 6-endo-cyclization of hydroxy epoxide, ring-closing olefin metathesis, and SmI2-induced intramolecular Reformatsky-type reaction. Several kinds of double reactions at the left and right sides were efficiently used through the synthesis.     

A hybrid approach combining energy density analysis with the interaction energy decomposition method

We propose a new analysis technique for characterizing molecular interactions that combines an energy decomposition scheme, such as the Kitaura-Morokuma decomposition method, with energy density analysis, which partitions the total energy of the system into atomic contributions. The combined scheme, termed Interaction-EDA, enables us to estimate the local contribution of interaction energy components, such as electrostatic, exchange, polarization, and charge transfer. The evaluation of the local interaction energy is rather important in large systems. For a numerical assessment, the Interaction-EDA method is applied to the process of CO adsorption on Si(100) - (2 x 1) surface.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

An atropisomeric M2L4 cage mixture displaying guest-induced convergence and strong guest emission in water

Introduction of atropisomeric axes into a bent bispyridine ligand leads to the quantitative formation of a complex mixture of atropisomeric M₂L₄ cages upon treatment with metal ions. Whereas the isomer ratio of the obtained cage mixture, consisting of up to 42 isomers, is insensitive to temperature and solvent, the quantitative convergence from the mixture to a single isomer is accomplished upon encapsulation of a large spherical guest, namely fullerene C₆₀. The observed isomerization with other guests depends largely on their size and shape (e.g., <10 and 82% convergence with planar triphenylene and bowl-shaped corannulene guests, respectively). Besides the unusual guest-induced convergence, the present cage mixture displays the strongest guest emission (Φ_F = 68%) among previously reported M_nL_m cages and capsules, upon encapsulation of a BODIPY dye in water.

A complex mixture of atropisomeric M₂L₄ cages is shown to undergo perfect convergence to a single isomer upon encapsulation of spherical C₆₀ in water. Moreover, the cage mixture displays very strong guest emission upon encapsulation of a BODIPY dye.     

Synthesis of polystyenes with different stereoregularities by anionic polymerization

The stereoregularity of polystyrene prepared by anionic polymerization was determined by means of ¹³C-NMR spectroscopy. The stereoregularity changed with such polymerization conditions as catalyst, solvent, and temperature. Sodium naphthalene as catalyst gave a syndiotactic-rich polystyrene of 66–68% syndiotactic dyads independently of solvent and temperature, while potassium and cesium naphthalenes as catalyst produced polystyrenes with different stereoregularities ranging from syndiotactic-rich to isotactic-rich configurations, depending on solvent and temperature. The mechanism of anionic polymerization which caused the difference in stereoregularity was discussed from the viewpoint of growing ionic species.     

Control of viscoelasticity using redox reaction

The viscoelasticity of a fluid was tuned with the Faradaic reaction of (11-ferrocenylundecyl)trimethylammonium bromide (FTMA), a "redox-switchable" surfactant. An aqueous solution of the reduced form of FTMA exhibited a remarkable viscoelasticity in the presence of sodium salicylate (NaSal) because of the formation of three-dimensional entanglement of wormlike micelles. Electrolytic oxidation of FTMA caused the viscosity of the system to dramatically decrease and the elasticity to disappear. This drastic decrease in viscoelasticity arose from the disruption of wormlike micelles. This novel electrorheological phenomenon is expected to be applicable to ink for inkjet printers, the electrochemically controlled release of substances entrapped in wormlike micelles of FTMA, and fluid flow rate control using electric signals.     

The counterion releasing effect and the partition coefficient of branched alkanols in ionic micellar solution

In the micellar solution of SDS, the partition coefficient (K_x) of following branched alkanols at infinite dilution was determined by applying a differential conductivity method: the alkanols used were i-C_mH_2m+1OH (m=4-9, i=1-5) in which the position of OH group (i) shifts from an end to the center of a hydrocarbon chain. The method provides two significant quantities, d!/dX_am and dC_sf/dC_af in addition to K_x. The following results have been obtained. (1) The dependence of K_x on i indicates that the hydrophobicity of alkanol is weakened with increasing i, whereas the increase in m strengthens the hydrophobicity. (2) The degree of counterion disossiation of micelles (!) is accelerated by the solubilized alkanols in micelles (mole fraction: X_am) and the acceleration rate, d!/dX_am (=0.17), depends on neither m nor i. (3) In the bulk water, the monomerically dissolved alkanols (concentration: C_af) depresses the concentration of free monomer surfactant (C_sf), and the depressing rate, dC_sf/dC_af, in micellar solution is identical with the corresponding quantity, ((CMC/(C_a)_o at CMC.