Flow and heat transfer in a pipe with a fin attached to inner wall

Enhancement of heat transfer to the fluid can be done by turbulence promoters such as attached fins to the pipe walls. In this study, the flow field and the heat transfer rates were numerically investigated in a pipe with an internally attached fin. Numerical simulations were conducted for four different types of fluids and for different fin heights and locations, and as the Reynolds number was varied, the effects of the fin on Nusselt number and friction factors were investigated. For all the Reynolds numbers considered in this study, the effect of fin location on the heat transfer rate and friction factor was negligible. As the fin height was increased, the mean Nusselt number and the friction factor also increased in the turbulent flow regimes. For low Prandtl number fluids (Pr = 0.011), the main heat transfer mode is conduction, and hence the mean Nusselt number slightly affected the flow rates.     

Facile assembly of Bodipy-based metal ion sensor using click chemistry

In this study, two novel 4,4′-difluoro-4-bora-3a,4a-diaza-s-indacenes (BODIPY)-based metal ion sensors were synthesised using ‘click’ chemistry. The coordination modes and binding constants of the complexes formed with a range of metal ions were calculated. Results indicate that both BODIPY molecules can potentially serve as fluorescent sensors for the studied metal cations. The results also show that the BODIPY-based sensors have more selectivity for Zn (II) ions in the presence of other metal ions.     

Observation of adhesive force and energy of adsorbents on rubber substrates by atomic force microscopy

We observed the surface morphology and adhesive interaction of adsorbents on rubber substrates by atomic force microscopy (AFM). The detachment of adsorbents from rubber substrates is an important issue for various machines like home appliances and laundry machine. Since a clean surface of the functioning parts is required, a frequent cleaning process must be developed. In particular, dust and lint have a tendency to bind to the rubber surface of a laundry machine. Several practical methods have been attempted to remove these particles from the surface. Pure water, detergent, sodium hypochlorite (65 °C), and cold water (18 °C) are treated onto artificial dust and lint mixtures on rubber with water fluid by rapid rpm. The dust‐and‐lint adsorbents are investigated by AFM after the treatment, and topographic images and force–distance (F–D) curves were generated for the samples. The roughness, measured as the root mean square, is a key factor to judge the cleaning quality. From the F–D curves, we are able to obtain adhesive energy in addition to adhesive force which will yield qualitative measures of the interactions between the remaining adsorbents and the rubber surface. Considering the values that were measured, hot water with water fluid by rapid rpm offers the best performance when cleaning the surface. The chemical like sodium hypochlorite is good for thinning the materials, but it solidifies them, which is eventually detrimental to proper functioning. Copyright © 2014 John Wiley & Sons, Ltd.     

Physicochemical Analysis of Inorganic Systems

The results of phase equilibria predictions for the Na,K∥SO₄,CO₃,HCO₃,F-H₂O six-component system at 25°C in the trona crystallization region (Na₂CO₃ · NaHCO₃ · 2H₂O) by the translation method are considered. Trona, which is one of the equilibrium solid phases of the title system at 25°C, is involved in equilibria that correspond to 14 invariant points, 37 monovariant curves, and 28 divariant fields. These data were used to construct a fragment of the phase equilibrium diagram of the title system in the trona crystallization region.     

Two New Insecticidal Amides and a New Alcoholic Amide from Piper nigrum Linn.

Three new amides, pipgulzarine ( 1 ), pipzorine ( 2 ), and piptahsine ( 3 ), have been isolated from the dried seeds of Piper nigrum Linn. along with nine known constituents: (2E,4E,8Z)‐N‐(isobutyl)eicosatrienamide, pellitorine, pipercide, piperine, stigmastanol, stigmasterol, decurrenal, stigmasterol 3‐O‐β‐D ‐glucopyranoside, and 5,10(15)‐cadinen‐4‐ol. The structures of the new constituents have been established as (2E,11E)‐12‐(benzo[1,3]dioxol‐5‐yl)‐N‐(2‐methylpropyl)dodeca‐2,11‐dienamide ( 1 ), (2E,12Z)‐N‐(4‐methylpentyl)octadeca‐2,12‐dienamide ( 2 ), and (2E,4S)‐4‐hydroxy‐N‐(2‐methylpropyl)hex‐2‐enamide ( 3 ). The structures of 1 – 3 were derived by spectral studies and chemical reactions, and by comparison of spectral data in the case of known constituents. Compounds 1 and 2 , and most of the already known compounds, exhibited toxicity against fourth instar larvae of Aedes aegypti Liston. The isolated (Z) double bond in 2 was assigned on the basis of its EI‐MS fragmentation pattern and its reaction with OsO₄. The (S) configuration at C(4) of 3 was determined by Horeau's method. This is the first report of the isolation of a 4‐methylpentylamide from P. nigrum, while shorter branched amides have been reported from this genus [1].     

Photogeneration and thermal generation of pentacene from soluble precursors for OTFT applications

A CO adduct of pentacene with an unsymmetrical structure is synthesized; it is soluble and can be spin-coated into thin films. Pentacene is regenerated in near quantitative yield by either thermal or photoinduced elimination of CO. OTFT devices fabricated by this compound exhibit typical FET characteristics.     

The Preparation of (8‐Hydroxyquinolinato)Bis(2‐Phenylpyridyl)Iridium Complexes and Their Photophysical Properties

Four derivatives of the titled compounds, (8‐hydroxyquinoline)bis(2‐phenylpyridyl)iridium ( IrQ(ppy)₂ ), were prepared. Two of them were confirmed by single crystal X‐ray diffraction analyses, in which solvent molecules were found to be incorporated in the crystal lattices. Their emission spectra display separated dual bands in de‐aerated solutions at about 515 and 645 nm upon excitation. These green and red emissions are attributed to the triplet metal‐to‐ligand charge transfer (³MLCT) and triplet ligand centered (³LC) transitions in Ir(ppy)₂ and IrQ, respectively. It is suggested that such a multiple emission is feasible by nearly orthogonal orientation between the ppy and quinoline ligands in the mixed‐ligand Ir‐compounds which prohibits energy transfer between the two different ligands. The electroluminescence (EL) of these compounds was examined by the fabrication of light‐emitting diodes (LEDs). Unlike the spectra in solutions, their EL spectra displayed only the red emission band. Devices displaying white light can be obtained by mixing the red emission of IrQ(ppy)₂ with a compatible blue emitter (NPB) in separated layers.     

Bioactivity Profiles of Cytoprotective Short-Chain Quinones

Short-chain quinones (SCQs) have been investigated as potential therapeutic candidates against mitochondrial dysfunction, which was largely thought to be associated with the reversible redox characteristics of their active quinone core. We recently reported a library of SCQs, some of which showed potent cytoprotective activity against the mitochondrial complex I inhibitor rotenone in the human hepatocarcinoma cell line HepG2. To better characterize the cytoprotection of SCQs at a molecular level, a bioactivity profile for 103 SCQs with different compound chemistries was generated that included metabolism related markers, redox activity, expression of cytoprotective proteins and oxidative damage. Of all the tested endpoints, a positive correlation with cytoprotection by SCQs in the presence of rotenone was only observed for the NAD(P)H:quinone oxidoreductase 1 (NQO1)-dependent reduction of SCQs, which also correlated with an acute rescue of ATP levels. The results of this study suggest an unexpected mode of action for SCQs that appears to involve a modification of NQO1-dependent signaling rather than a protective effect by the reduced quinone itself. This finding presents a new selection strategy to identify and develop the most promising compounds towards their clinical use.