MALDI linear-field reflectron TOF post-source decay analysis of underivatized oligosaccharides: Determination of glycosidic linkages and anomeric configurations using anion attachment

Six different anionic species (fluoride, chloride, bromide, iodide, nitrate, and acetate) are tested for their abilities to form anionic adducts with neutral oligosaccharides that are detectable by MALDI-TOF mass spectrometry. Fluoride and acetate cannot form anionic adducts with the oligosaccharides in significant yields. However, bromide, iodide, and nitrate anionic adducts consistently appear in higher abundances relative to [M - H](-), just like the highly stable chloride adducts. Post-source decay (PSD) decompositions of Br(-), I(-), and NO(3)(-) adducts of oligosaccharides provide no structural information, i.e., they yield the respective anions as the main product ions. However, determination of linkage types is achieved by analysis of structurally-informative diagnostic peaks offered by negative ion PSD spectra of chloride adducts of oligosaccharides, whereas the relative peak intensities of pairs of diagnostic fragment ions allow differentiation of anomeric configurations of glycosidic bonds. Thus, simultaneous identification of the linkage types and anomeric configurations of glycosidic bonds is achieved. Our data indicate that negative ion PSD fragmentation patterns of chloride adducts of oligosaccharides are mainly determined by the linkage types. Correlation may exist between the linkage positions and fragmentation mechanisms and/or steric requirements for both cross-ring and glycosidic bond fragmentations. PSD of the chloride adducts of saccharides containing a terminal Glcalpha1-2Fru linkage also yields chlorine-containing fragment ions which appear to be specifically diagnostic for a fructose linked at the 2-position on the reducing end. This also allows differentiation from saccharides with a 1-1 linked pyranose on the same position.     

Theoretical studies of blue-emitting iridium complexes with different ancillary ligands

The structural and electronic properties of two heteroleptic iridium complexes Ir(dfppy)2(pic) (FIrpic) and Ir(dfppy)2(acac) (FIracac) have been investigated theoretically, where dfppy = 2-(2,4-difluorophenyl) pyridine, pic = picolinic acid, and acac = acetoylacetonate. The geometries of ground and excited states are optimized at PBE0/LANL2DZ and CIS/LANL2DZ levels, respectively. Time-dependent density functional theory (TDDFT) method is employed to explore the absorption and emission properties. In the ground state, the highest-occupied molecular orbital has a significant mixture of metal Ir(d) and dfppy(pi), the lowest-unoccupied orbital locates primarily on pi* of pic for FIrpic and pi* of dfppy for FIracac. The luminescence of each complex originates from the lowest triplet excited state, which is assigned to the mixing of metal-to-ligand charge transfer and intraligand charge transfer characters. The effects of ancillary ligands pic and acac on absorption and emission spectra are observed by analysis of TDDFT results. The connection between the nature of excited states and the behavior of the complexes with different ancillary ligands is elucidated.     

Amphiphilic Janus gold nanoparticles via combining "solid-state grafting-to" and "grafting-from" methods

Despite the great efforts that have been made toward obtaining Janus architectures, synthesizing sub-10 nanometer Janus nanoparticles (NPs) modified with different types of polymers remains a challenging task. In this Communication, "solid-state grafting-to" and "grafting-from" methods were combined to obtain Janus gold NPs (AuNPs) modified with two types of polymer chains on the opposite sides of the NP. We used functionalized polymer single crystals as the solid substrates to immobilize AuNPs. We then used atom transfer radical polymerization to grow polymer chains on the "free" side of the AuNPs. Amphiphilic polyethylene oxide (PEO)-Au-poly(methyl methacrylate), PEO-Au-poly(tert-butyl acrylate) and hydrophilic PEO-Au-poly(acrylic acid) were synthesized. The Janus nature was demonstrated using a platinum-nanoparticle-decoration method. Using polymer single crystals as the reaction substrates is advantageous because they afford higher throughput compared with self-assembled monolayers. Dissolution of the single crystal also leads to NPs with defined polymer patches. We anticipate that our approach could serve as a generic method for synthesizing polymer-functionalized, sub-10 nm Janus NPs. This unique system holds promises for achieving controlled assembly and tunable optic and electronic properties of NPs.     

LC–ESI-MS Determination of Hydroxycamptothecin in Rat Plasma

A rapid and sensitive method using liquid chromatography with electrospray ionization mass spectrometric detection (LC–ESI-MS) was developed and validated for the determination of hydroxycamptothecin in rat plasma. Plasma samples were extracted with ether and separated on a C₁₈ column interfaced with a single quadrupole mass spectrometer, with mobile phase consisting of 0.1% formic acid–methanol (45:55, v/v). Detection was carried out by positive electrospray ionization (ESI) in selected ion recording (SIR) mode at m/z 321 and 305 for hydroxycamptothecin and camptothecin (internal standard), respectively. The linearity was obtained ranged from 2.5 to 1,000 ng mL^?1 and the lower limit of quantification (LLOQ) was determined to be at 2.5 ng mL^?1. The intra- and inter-day precision (%RSD) was less than 5.5% and accuracy (% RE) ranged from 3.8 to 5.3%. This method was applied successfully to a preliminary pharmacokinetic study following the intravenous administration of hydroxycamptothecin to rats.     

Mononuclear and binuclear rhenium carbonyl nitrosyls: comparison with their manganese analogues

The structures and energetics of Re(NO)(CO)n (n = 5, 4, 3, 2) and Re2(NO)2(CO)n (n = 7, 6) have been investigated using density functional theory. For Re(NO)(CO)4 the preferred structure is an equatorially substituted trigonal bipyramid analogous to the known structure of the manganese analogue. The lowest energy structures for the unsaturated Re(NO)(CO)n (n = 3, 2) species can be derived from this structure by removal of carbonyl groups. A structure is found for Re(NO)(CO)5 in which the NO ligand has attached to one of the CO ligands by forming a C-N bond to give an unprecedented eta(2)-OCNO ligand. However, this structure is predicted to undergo exothermic CO loss to give Re(NO)(CO)4. The preferred structures for the binuclear derivatives Re2(NO)2(CO)n (n = 7, 6) are structures unprecedented for the manganese analogues and consist of a Re(CO)5 unit linked to a Re(NO)2(CO)(n-5) unit. However, only slightly higher in energy are structures of the type Re2(mu-NO)2(CO)n with two bridging nitrosyl groups, similar to the global minima for the manganese analogues. These results predict extensive areas of new rhenium carbonyl nitrosyl chemistry. Thus the synthesis of Re(NO)(CO)4 by methods related to the synthesis of the manganese analogue appears to be feasible. In addition, the existence of an extensive series of Re(NO)2(CO)2X derivatives, as well as a Re2(NO)4(CO)4 dimer, is predicted.     

New attempt at directly generating superbasicity on mesoporous silica SBA-15

Direct generation of superbasicity on mesoporous silica SBA-15 was realized by tailoring the host-guest interaction, and calcium species were selected as the guest in modifying SBA-15. The results show that calcium species could be homogeneously distributed on the surface of SBA-15. Because of the host-guest interaction, the decomposition of the supported calcium nitrate was apparently easier than the bulk one. Surprisingly, the calcium nitrates modified SBA-15 (CaNS) samples exhibited superbasicity with good preservation of the mesostructure after activation, differing from the potassium nitrate loaded SBA-15 samples that displayed weak basicity with collapsed mesostructure. The present superbasic CaNS materials also possess good water resistance and high surface areas, up to 429 m(2) g(-1), which is promising for their potential applications in adsorption and catalysis. Further investigation concerning the roles played by the guest in basicity formation on SBA-15 was conducted. The samples modified by Group 2 metal nitrates showed strong basicity with base strength (H-) of 22.5-27.0 and good preservation of mesostructure. In contrast, loading Group 1 metal nitrates on SBA-15 produced samples with weak basicity ( H-=9.3-15.0) and collapsed mesostructure after activation. Such differences can be related to the interaction between the resulting metal oxide and the silica support, as well as the mobility of the cations in the metal oxide.     

6063铝合金三价铬化学转化膜的制备与电化学性能

以硫酸铬钾及磷酸为原料在6063铝合金上制备了三价铬化学转化膜. 采用极化曲线及交流阻抗技术研究了不同条件下三价铬转化膜的电化学性能. 结果表明, 温度为30-40 ℃、沉积时间为9 min、pH值为2.0-3.0、KCr(SO4)2为15-25 g·L-1及H3PO4的浓度为10-20 g·L-1的条件为最优条件. Tafel极化曲线结果表明化学转化膜比基体铝合金具有更正的腐蚀电位(Ecorr)、小孔腐蚀电位(Epit)和更低的腐蚀电流(icorr), 说明化学转化膜具有良好的耐腐蚀性能. 利用交流阻抗谱的数据建立了等效电路模型, 并拟合出了腐蚀参数, 如表面电阻(Rcoat)及电容(Ccoat), 电荷转移电阻(Rct)及双电层电容(Cdl)等. 三价铬化学转化膜的交流阻抗谱结果与极化曲线的电化学测试结果相吻合.     

环双(对-蒽基-对草快)的分子识别与谱学性质

环双(对-蒽基-对草快)是一种新型的缺电子大环仿生主体, 分子识别是其最重要的应用之一. 考察主体对一系列客体分子如水、氨、醇及杂环等的识别能力, 用密度泛函理论(DFT)中的B3LYP/3-21G基组对主客体复合物的结构进行优化. 在B3LYP/6-31G(d)水平上进行单点能计算, 校正后得到复合物的结合能. 用B3LYP/3-21G方法计算13C和3He化学位移. 结果表明, 主体对客体分子的识别主要靠客体上的杂原子与主体上的氢原子之间的氢键进行. 复合物的稳定化能受氢键的数目和距离影响. 氢键的形成导致部分复合物LUMO与HOMO能隙增大, 同时导致与氢键相连的C—H键上C原子的化学位移向低场移动. 复合物的芳香性与其结合能的大小及结合方式有关. 主体的芳香性因其与客体之间的弱相互作用而提高, 但太强的相互作用及客体在主体空腔内都将影响主体的环电流, 从而削弱其芳香性.     

磺酸基功能化的有序SBA-15-SO3H介孔分子筛的合成及其在苯酚叔丁基化反应中的应用

通过一步法合成了SBA-15-SO3H介孔分子筛,用XRD,TEM,低温N2吸附和吡啶吸附红外光谱等方法进行了表征,并研究了其在苯酚叔丁基化反应中的催化性能.结果表明,SBA-15-SO3H保持了母体SBA-15高度有序的六方介孔结构,具有较强的酸性和热稳定性,且在苯酚叔丁基化反应中表现较好的催化活性和2,4-二叔丁基苯酚选择性.