活性炭和石墨混合载体的Pt催化剂（Pt/CG）对乙醇氧化电催化活性的影响

用化学沉积法制备炭载Pt(Pt/C)和以活性炭与石墨作混合载体的Pt(Pt/CG)催化剂。实验结果表明，活性炭与石墨质量比影响Pt/CG催化剂对乙醇氧化的电催化活性。当活性炭与石墨的质量比为15∶1时，制得的Pt/CG催化剂对乙醇氧化的电催化活性最高。     

低热-高压法制备PLGA多孔支架及其体外降解研究

采用低热-高压法制备了聚(dl-丙交酯／乙交酯)75／25(PLGA75／25)组织工程多孔支架。该方法避免了使用有机溶剂，支架的孔隙率在90％以上，孔径大小分布均匀。多孔支架经过酒精处理后，支架表面产生许多微小的凹陷；用藻酸钙改性处理后，支架形态保持良好。两种处理都使支架的压缩强度有所增大，亲水性增强。虽然孔隙率高的支架降解速率稍慢，但其体外降解规律基本一致：特性粘数争力学强度衰减快，而质量损失较慢，降解6周后，支架的质量损失仅为3％左右；体外降解3周后，支架的形态保持良好，可望在细胞移植争组织修复的早期发挥支撑作用。     

Pt-SnO2 / C催化剂对乙醇和吸附态CO的电催化氧化

由于乙醇最有可能成为直接甲醇燃料电池（DMFC）的替代燃料，因此近年来。对乙醇的电化学氧化及直接乙醇燃料电池的研究已引起人们的很大兴趣。甲醇毒性较大并且易透过Nafion膜进入阴极造成阴极的混合电位而影响DMFC的阴极性能．这是制约DMFC走向实用化的主要问题之一。因此人们在致力于研究直接甲醇燃料电池的同时．也寻求其它的小分子醇作为甲醇的替代燃料。乙醇是除甲醇以外最简单的醇．它来源广泛．无毒，是可再生和环保型能源．并且也有较高的能量密度和反应活性。但是乙醇在电极上的完全氧化因涉及到C-C键的断裂要比甲醇困难．阳极反应动力学过程也比较缓慢。到目前为止铂基催化剂仍然是乙醇氧化最好的催化剂．虽然也有使用非铂催化剂研究乙醇的电氧化，但催化活性远不如铂基催化剂高。     

Expression and Purification of ZNF191（243-368） in Three Expression Systems

ZNF191 （243-368）, a new human zinc finger protein, probably relates to some hereditary diseases and cancers, To obtain adequate amount of ZNF191（243-368） for the study of its property, structure and function, three different expression systems of inclusion-body, glutathione S-transferase （GST）, and hexahistidine （6 × His） were used and compared. Among these systems, the expression level of ZNFI91（243-368） was increased in inclusion body system under a higher isopropylthio-β-D-galactoside （IPTG） concentration, but the non-target proteins were also increased more, which made its purification more difficult and the yield lower. The expression of His-tag fusion protein was almost not affected by IPTG concentration, temperature and inducing time. At a high IPTG concentration the highest expression yield for GST fusion protein was obtained. And the fusion proteins can be partially purified by a single affinity chromatography step. The fusion protein systems show advantages for expression of these proteins.     

Determination of medecamycin by adsorptive stripping voltammetry with an activated electrode

The adsorptive and electrochemical behaviors of medecamycin were investigated on a glassy carbon electrode (GCE) pretreated by anodic oxidation at +1.8 V for 5 min in 0.025 mol l^–1 NH₃-NH₄Cl (pH 8.6) solution. An adsorptive stripping voltammetric method for the determination of medecamycin at the pretreated glassy carbon electrode has been developed. Medecamycin was accumulated in NH₃-NH₄Cl buffer (pH 9.0) at a potential of –0.7 V (vs. saturated calomel electrode (SCE)) for a certain time, and then determined by second-order differential anodic stripping voltammetry. The second-order differential anodic stripping peak current at +0.72 V was proportional to the concentration of medecamycin in the range 2.0 g ml^–1 to 50.0 g ml^–1. The detection limit (three times the signal-to-noise) was 1.0 g ml^–1 and the relative standard deviation of the results was 3.28% for eight successive determinations of 10.0 g ml^–1 medecamycin. This method has been applied to the direct determination of medecamycin in commercial tablets and spiked urine samples with satisfactory results.     

用FTIR定量测定聚对苯二甲酸乙二酯晶区和非晶区反式构象含量

用傅里叶变换红外分光光度计测定不同条件下退火处理的聚对苯二甲酸乙二酯膜的谱图, 用谱带分离技术对归属于反式构象的1340cm^-^1谱带进行阻尼最小两乘分峰处理, 结合属左右式构象贡献的1454cm^-^1谱带, 用线性回归分析的方法获得晶区反式构象、非晶区反式构象、非晶区左右式构象的百分含量。     

SSCH3光解离的多参考理论计算

摘要运用多参考微扰理论(Multireference MΦller-Plesset theory)计算了SSCH3垂直激发能及其S-C与S-S两种断键方式的绝热(Adiabatic)与非绝热(Diabatic)的基态和激发态势能曲线, 研究了在193nm激光作用下SSCH3的光解离过程, 理论计算值与实验值相符.     

Self-assembled hybrid nanofibers confer a magnetorheological supramolecular hydrogel

Most magnetorheological materials, composed of magnetic microparticles in a liquid, require significant amounts of magnetic particles and a large magnetic field to achieve the desired effects. Here, we report on a new type of magnetorheological materials consisting of small amounts of magnetic nanoparticles (0.8 wt %) but exhibiting large rheological change (i.e., a gel-sol transition) upon the application of a small magnetic field. We use self-assembly to create hybrid nanofibers, which consist of supramolecular hydrogelators and magnetic nanoparticles, as the matrices of the hydrogel. Localized in the nanofibers at a distance of 1-2 nm, the magnetic nanoparticles occupy a small volume fraction of the hydrogel, significantly enhancing the magnetic dipole interactions between them, which results in the large magnetoresponse. This strategy generates a hierarchical nanostructure and eliminates several drawbacks of the simple mixture of polymers with nanoparticles, and thus provides a new methodology that uses magnetic force to control the nanostructures and properties of soft materials.     

明胶中α组分含量对明胶/羟基磷灰石复合材料力学性能的影响

选用α组分含量分别为20.5%,41%和50%的A、B、C 3种明胶作为原料,采用同时加入法制备了明胶/羟基磷灰石(HAP)复合材料.通过对干态复合物膜拉伸性能的测试和对比,发现,明胶α组分含量的变化对复合材料的弹性模量影响较大,而对拉伸强度和断裂伸长率的影响则相对较小,但总的来说,三者均随α组分含量的增加而增大.其中,α组分含量最高的复合物C的拉伸强度为86.40 MPa,弹性模量为2682.35 MPa,断裂伸长率为8.65%.另外,对复合物C基本性质的表征结果表明,该材料具有类似于自然骨的组成和结构性质,因此有望成为一种具有优异力学性能的骨替代材料.     

Kinetic study of copper(II) complexation with 9-ethyl-3-carbazolecarboxaldehyde-thiosemicarbazone and kinetic-spectrophotometric determination of copper(II)

The kinetics of complexation reaction of Cu(II) with 9-ethyl-3-carbazolecarboxaldehyde-thiosemicarbazone (ECCAT) has been examined spectrophotometrically. The ligand was synthesized for the first time. The complexation reaction was carried out in a DMF-water medium at 35°C. The complex has maximum absorbance at 393 nm. Kinetic and activation parameters of the complexation reaction were calculated by the Arrhenius and Eyring equations using the data obtained from investigating the effect of temperature on reaction rates under the specified conditions. We also proposed reaction rate equations. Based on the studied complexation reaction, a simple kinetic method for the spectrophotometric determination of copper(II) has been developed. The calibration graphs are linear in the concentration range 0.2–1.9 μg/mL. The species that caused interference were investigated. The text was submitted by the authors in English.