Determination of low levels of an antioxidant in polyolefins by large-volume injection temperature-programmed packed capillary liquid chromatography

Sub-ambient column temperatures, promoting strong interactions between the analyte and the stationary phase material, were utilized to focus large volumes of the polyolefin antioxidant Irganox 1076 [benzenepropanoic acid, 3.5-bis(1,1-dimethylethyl)-4-hydroxy-, octadecyl ester] on the column inlet, using pure acetonitrile as sample solvent and mobile phase. Injection volumes up to 100 microl were successfully employed on a 50 cm x 320 microm I.D. capillary column packed with 5 microm Kromasil 100 ODS particles. Irganox 1076 was eluted after completed injection by temperature programming, using a temperature program from 7 to 90 degrees C, in 3 degrees C min(-1). UV detection, using a low-dispersion "U"-shaped flowcell, was performed at 280 nm. The method was applied for the determination of Irganox 1076 that was extracted from low-density polyethylene (0.6 ppm, w/w). Both Soxhlet and microwave-aided solvent extractions were performed, using chloroform and acetonitrile as solvents, respectively. The microwave-aided extraction with acetonitrile was found to give approximately the same yield as the standard Soxhlet reference method. Consequently, small volumes of acetonitrile could be used both as extraction solvent, sample solvent and mobile phase, simplifying the analysis process. The mass limit of detection of the method was found to be 3.3 ng, corresponding to a concentration limit of detection of 33 ng ml(-1), utilizing an injection volume of 100 microl. The within and between day precision of retention times displayed relative standard deviations below 1.2%.     

A passive sampler-GC/ECD method for analyzing 18 volatile organohalogen compounds in indoor and outdoor air and its application to a survey on indoor pollution in Shizuoka, Japan

A simple and reliable method was developed for analysis of 18 volatile organohalogen compounds (VOHCs) both indoors and outdoors, consisting of VOHC collection by a passive sampler, extraction with toluene by mechanical shaking, and automatic separation analysis by capillary gas-chromatography with electron capture detector (GC/ECD). The passive sampler is a porous polytetrafluoroethylene (PTFE) tube (30.30+/-0.37 mm net collection length, 5.0 mm inside diameter, 0.990 g weight) uniformly packed with activated charcoal (194.4+/-3.8 mg). The procedure was applied to a field survey on indoor and outdoor VOHC pollution in Shizuoka, Japan. Ten VOHCs, including trichloroethylene, tetrachloroethylene, chloroform, carbon tetrachloride, and p-dichlorobenzene, were detected from indoor and outdoor air samples. The ratios of maximum to minimum VOHC concentrations, both outdoors and indoors, were large. The indoor and outdoor concentrations of 1,1-dichloroethylene, dichloromethane, 1,1,1-trichloroethylene, carbon tetrachloride and trichloroethylene were found to be similar. Indoor concentrations of trihalomethanes, p-dichlorobenzene and tetrachloroethylene were higher than those of outdoors.     

The pH-dependent role of superoxide in riboflavin-catalyzed photooxidation of 8-oxo-7,8-dihydroguanosine

[reaction: see text]. The riboflavin-catalyzed photooxidation of 2',3',5'-tri-O-acetyl-8-oxo-7,8-dihydroguanosine generates a radical intermediate that is competitively trapped by H(2)O, O2(-)(*), or O(2). The products of H(2)O trapping have been previously described as the spiroiminodihydantoin (pH >or= 7) and iminoallantoin/guanidinohydantoin (pH < 7) nucleosides. Trapping by O2(-)(*) leads to the oxaluric acid (pH or= 8.6) pathways (R' ', R' ' = H or 2,3,5-tri-O-Ac-ribofuranosyl). The pH-dependent role of superoxide was probed using Mn-SOD and compared to guanosine and 8-methoxyguanosine photooxidation.     

Application of parallel processing techniques to improving the efficiency of MM2 molecular mechanics calculations

The application of parallel processing techniques to molecular mechanics calculations is evaluated. Using the standard molecular mechanics package, MM2, four different parallel versions of the program are implemented in a four-processor computing environment. A set of 529 test structures is used to compare the efficiency of the parallel versions of MM2 to a standard serial version of the program. Statistics describing execution times and program execution cycles are gathered and analyzed. The effects of parallel processing overhead and computer system load are explored, and the practical utility of parallel processing in molecular mechanics is estimated. The results of these parallelization experiments indicate that for geometry optimizations requiring significant amounts of computing time an improvement in program execution speed approaching 50% is realizable. © 1993 John Wiley & Sons, Inc.     

Rare earth element patterns in biotite muscovite and tourmaline minerals

Rare earth element concentrations in the minerals biotite and muscovite from the mica schist country rocks of the Etta pegmatite and tourmalines from the Bob Ingersoll pegmatite have been measured by INAA and CNAA. The concentrations range from 10^–4 g/g to 10^–10 g/g. The REE patterns of biotite, muscovite and tourmaline reported herein are highly fractionated from light to heavy REE. The REE concentrations in biotite and muscovite are high and indigenous. The pegmatite tourmalines contain low concentrations of REE. Variations in tourmaline REE patterns reflect the geochemical evolution of pegmatite melt/fluid system during crystallization.Work supported by the U. S. Department of Energy under Contract DE-AC06-76RLO 1830.     

7-Aryl-6,7-dihydro-8h-indeno[1′,2′∶2,3]pyrano-[5,6-c]benzo[c]pyran-6,8-diones and their thio analogs

The ability of 3-[-(1,3-dioxo-2-indanyl)benzyl]-4-hydroxy-substituted 2H-benzo [b]pyran-2-ones and benzo[b]thiopyran-2-ones to undergo dehydration under the influence of dehydrating agents to give 7-aryl-6,7-dihydro-8H-indeno[1,2-2,3]pyrano[5,6-c]benzo[c]pyran-6,8-diones and their thio analogs was demonstrated.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1475–1476, November, 1985.     

On the synthesis of geometric isomers of 2-methyl (or phenyl)-4-[α-arylethylidene]-5(4H)-oxazolones

Several Z-2-methyl(or phenyl)-4-[α-arylethylidene]-5(4H)-oxazolones 3Z, 4Z were prepared. The results obtained were compared by diazomethane insertion and condensation procedure. In order to synthesize E-2-phenyl-4-[α-arylethylidene]-5(4H)-oxazolones 4E hydrogen bromide isomerization in dry benzene was used.     

Itinerant electron ferromagnetism in Sr2+-, Ca2+-, and Ba2+-doped rare-earth orthocobaltites (Ln3+1−xM2+xCoO3)

Electronic and magnetic properties of Ln_1?xSr_xCoO₃ (Ln = Pr, Nd, Sm, Eu, and Gd) systems show that above a critical value of x, the d electrons become itinerant while the materials become ferromagnetic at low temperatures. The ferromagnetic component increases with increase in x and decrease in temperature. The Curie temperature increases with x and decreases with decrease in the size of the rare-earth ion. Incorporation of Ba²⁺ in LaCoO₃ favors itinerant electron ferromagnetism relative to Sr²⁺ while Ca²⁺ is less favorable than Sr²⁺.     

Polystyrene resins with immobilized polyamines: Preparation,characterization, and ability to bind Cu(II) ions

Three polyamine ligands, ethylenediamine (EDA), diethylenetriamine (DTA), and triethylenetetramine (TETA), were bound to three chloromethylated “popcorn” polystyrene resins (16, 50, and 100% phenyl ring substitution) with the use of pyridine as the reaction medium. The rate of chloride displacement decreased with increasing molecular weight of the amine and higher degree of resin chloromethylation, while the extent of multiple attachments to the polymer matrix increased. The additional crosslinking, a result of multiple attachments, caused the polyamine resins to swell to a lesser extent in pyridine and water. The ability of the insoluble polyamine–polystyrene resins to chelate Cu²⁺ ions from dilute solutions (200 ppm) was determined at pH 5. With EDA resins the capacity for Cu²⁺ increased with increasing amount of the bound polyamine, with DTA it remained unchanged, while with TETA it was found to decrease.     

Novel electroanalytical techniques for pollution analysis

Summary Two new analytical techniques are described. The so-called injection technique operates on evaluating a dynamic concentration signal as a result of following the concentration change in a certain part of a flow-through channel after injecting a sample or reagent at a small volume into the current of an appropriate solution flowing at a constant rate.The second technique, the programmed coulometric titration technique, also uses the flow-through channel principle; that means this novel technique allows the more precise titrimetric way of analysis in flowing solutions. In the case of both techniques potentiometric and voltammetric detectors were involved. Several examples proved the multifold advantages of these techniques for environmental analysis.

---

Neue elektroanalytische Verfahren für die Umweltanalyse

Zusammenfassung Zwei neue Methoden werden beschrieben. Die sog. Injektionstechnik wertet ein dynamisches Konzentrationssignal aus, das sich aus der Änderung in einem Durchflußkanal ergibt, wenn Probe oder Reagens in kleinen Volumina in einen konstant fließenden Flüssigstrom injiziert werden. Das zweite Verfahren, die programmierte coulometrische Titration, erlaubt die Anwendung der genaueren titrimetrischen Technik auf fließende Lösungen. Bei beiden Methoden werden potentiometrische und voltammetrische Detektoren verwendet. Mehrere Beispiele zeigen die vielfachen Vorteile dieser Verfahren bei der Anwendung auf die Analyse von Umweltmaterial.

Presented at the 6th Annual Symposium on Recent Advances in the Analytical Chemistry of Pollutants, April 21–23, 1976; Vienna, Austria