Low-coherence tandem interferometer for measurement of group refractive index without knowledge of the thickness of the test sample

A new low-coherence interferometric technique is proposed for measuring the group refractive indices of dispersive samples with high accuracy. A tandem configuration of interferometers is used to compensate for the asymmetrical distortion of interferograms that results from the broad spectrum of the light source. The group refractive index can be measured without knowledge of the geometrical thickness of the sample under test. The proposed technique can successfully measure even a thick sample. Computer calculations have shown the effectiveness of the proposed technique, which was verified by preliminary experiments; the difference between the experimental result and the catalog data was 7 x 10(-4).     

Universal generation of higher-order multiringed Laguerre-Gaussian beams by using a spatial light modulator

Laguerre-Gaussian (LG) beams of various higher-order radial modes are generated by using a reflective phase-only liquid crystal on silicon (LCOS) spatial light modulator (SLM). Because of the LCOS SLM's phase-modulation characteristic of a wide spatial bandwidth, a phase modulation scheme effectively generates higher-order LG beams of up to the fifth-order radial mode. We also perform correlation analyses between the observed and the theoretical two-dimensional mode profiles to universally obtain correlation coefficients of more than 0.946, which suggest mode generations of high quality.     

Discrete dihedral-angle modulation in porphyrin wheels adsorbed on Cu(1 0 0) observed by scanning tunneling microscopy

Conformations of two dodecameric porphyrin wheels adsorbed on a Cu(1 0 0) were probed by using scanning tunneling microscopy (STM). Whereas a wheel consisting of six meso-meso linked diporphyrins was detected as uniform ring structure, several different images with three discrete molecular heights were detected for a wheel consisting of six meso-meso, β-β,β-β triply-linked planar diporphyrins. These results indicate that the former has a conformation similar to that in a free space, while the latter has various conformations with respect to orientation of planar diporphyrin units toward the metal surface. Several discrete STM images of the latter have been interpreted in terms of possible eight conformations, which vary as to relative orientation of neighboring diporphyrin units.     

Thermal and photochemical reactivity of oxygen atoms on gold nanocluster surfaces

Reduction of oxidized gold nanoclusters by exposures to foreign gases and irradiation of UV photons has been investigated using X-ray photoelectron spectroscopy. Gold nanoclusters with narrow size distributions protected by alkanethiolate ligands were deposited on a TiO₂(1 1 0) surface with dip coating. Oxygen plasma etching was used for removal of alkanethiolate ligands and oxidization of gold clusters. The oxidized gold clusters were exposed to CO, C₂H₂, C₂H₄, H₂, and hydrogen atoms. Although, C₂H₄ and H₂ did not show any indications of reduction of oxidized gold clusters, CO, C₂H₂, and hydrogen atoms reduced the oxides on gold cluster surfaces. Among them, hydrogen atoms were most effective for reduction. Irradiation of UV photons around 400 nm could also reduce the oxidized gold clusters. The photochemical reduction mechanism was proposed as follows. The photo-reduction was initiated by electronic excitation of gold clusters and oxygen atoms activated reacted with carbon atoms at the surfaces of gold clusters. Carbon species were likely absorbed in gold clusters or remained at the boundaries between gold clusters when gold clusters agglomerated during oxygen plasma exposures. As the photochemical reduction progressed, carbon atoms segregated to the surfaces of gold clusters.     

Noise reduction combining time-domain epsilon-filter and time-frequency epsilon-filter

A time-domain epsilon-filter (TD epsilon-filter) is a nonlinear filter that can reduce noise while preserving a signal that varies drastically, such as a speech signal. Although the filter design is simple, it can effectively reduce noise. It is applicable not only to stationary noise but also to nonstationary noise. It cannot, however, be applied when the amplitude of noise is relatively large. This paper introduces an advanced method for noise reduction that applies an epsilon-filter to complex spectra, namely a time-frequency epsilon-filter (TF epsilon-filter). This paper also introduces noise reduction combining a TD epsilon-filter and a TF epsilon-filter. An advanced method called a variable time-frequency epsilon-filter is also proposed. First, the algorithm of the TD epsilon-filter is explained to clarify the problem. Then, the algorithms of the proposed methods are explained. By utilizing an epsilon-filter in the frequency domain, the proposed method can reduce not only noise that has a relatively small amplitude but also noise that has a relatively large amplitude. Experimental results are also given to demonstrate the performance of the proposed methods in comparison to the results of some conventional methods.     

Broad-spectrum frequency comb generation and carrier-envelope offset frequency measurement by second-harmonic generation of a mode-locked fiber laser

A frequency comb spanning more than one octave has been achieved by injecting the second-harmonic generation (780 nm) of a mode-locked fiber laser (1.56 microm) into a photonic crystal fiber. We propose and realize a novel interferometric scheme for observing the carrier-envelope offset frequency of the frequency comb. Frequency noise has been observed on the measured carrier-envelope offset frequency, which has been confirmed to be generated in the photonic crystal fiber by comparing the measured beat frequencies between cw lasers and frequency combs before and after the photonic crystal fiber. The mode-locked fiber laser is considered to be an important candidate for the light source used in realizing a compact optical frequency measurement system including applications in the telecommunication bands.     

Novel in-gap spin state in Zn-doped La1.85Sr0.15CuO4

Low-energy spin excitations of La(1.85)Sr(0.15)Cu(1-y)Zn(y)O4 were studied by neutron scattering. In y=0.004, the incommensurate magnetic peaks show a well-defined "spin gap" below T(c). The magnetic signals at omega=3 meV decrease below T(c)=27 K for y=0.008, also suggesting the gap opening. At lower temperatures, however, the signal increases again, implying a novel in-gap spin state. In y=0.017, the spin gap vanishes and elastic magnetic peaks appear. These results clarify that doped Zn impurities induce the novel in-gap state, which becomes larger and more static with increasing Zn.     

Modelling resonances of the standing body exposed to vertical whole-body vibration: Effects of posture

Lumped parameter mathematical models representing anatomical parts of the human body have been developed to represent body motions associated with resonances of the vertical apparent mass and the fore-and-aft cross-axis apparent mass of the human body standing in five different postures: ‘upright’, ‘lordotic’, ‘anterior lean’, ‘knees bent’, and ‘knees more bent’. The inertial and geometric parameters of the models were determined from published anthropometric data. Stiffness and damping parameters were obtained by comparing model responses with experimental data obtained previously.The principal resonance of the vertical apparent mass, and the first peak in the fore-and-aft cross-axis apparent mass, of the standing body in an upright posture (at 5–6 Hz) corresponded to vertical motion of the viscera in phase with the vertical motion of the entire body due to deformation of the tissues at the soles of the feet, with pitch motion of the pelvis out of phase with pitch motion of the upper body above the pelvis. Upward motion of the body was in phase with the forward pitch motion of the pelvis. Changing the posture of the upper body had minor effects on the mode associated with the principal resonances of the apparent mass and cross-axis apparent mass, but the mode changed significantly with bending of the legs. In legs-bent postures, the principal resonance (at about 3 Hz) was attributed to bending of the legs coupled with pitch motion of the pelvis in phase with pitch motion of the upper body. In this mode, extension of the legs was in phase with the forward pitch motion of the upper body and the upward vertical motion of the viscera.     

Surface treatment of CaCO3 with a mixture of amino- and mercapto-functional silane coupling agents and tensile properties of the rubber composites

In order to reinforce the composite consisting of isoprene rubber (IR) and calcium carbonate (CaCO₃) particles, the surface treatment of CaCO₃ particles with a mixture of amino- and mercapto-functional silane coupling agents was investigated. The quantity of chemisorbed silanes in treated CaCO₃ measured using thermogravimetry was greater for amino- than for mercapto-silane and for the tri- than for the dialkoxy structure. Second, the molecular mobility of polycondensate of the mixtures with the trialkoxy structure measured using ¹H pulse nuclear magnetic resonance had the least molecular mobility, i.e., formed the highest density network. The greater values of stress at 500% strain, fracture stress, and elongation at break were determined for the treatment with amino- and mercapto-functional silanes having a trialkoxy structure from the stress-strain curves of composite. The mixture treatment with dialkoxy structure and with amino- or mercapto-functional silane only did not improve the mechanical properties sufficiently. Interactions between the amino group and the CaCO₃ surface, covalent bonding between the mercapto group and the IR, and high density network formation of trialkoxy silane were important for improving the mechanical properties of the composite.     

Development of ultra-short pulse VUV laser system for nanoscale processing

We have developed intense vacuum ultraviolet (VUV) radiation sources for advanced material processing, such as photochemical surface reactions and precise processing on a nanometer scale. We have constructed a new VUV laser system to generate sub-picosecond pulses at the wavelength of 126 nm. A seed VUV pulse was generated in Xe as the 7th harmonic of a 882-nm Ti:sapphire laser. The optimum conversion was achieved at the pressure of 1.2 Torr. The seed pulse will be amplified by the Ar₂^*\mathrm{Ar}_{2}^{*} media generated by an optical-field-induced ionization Ar plasma produced by the Ti:sapphire laser. We have obtained a gain coefficient of g=0.16 cm⁻¹. Our developing system will provide VUV ultra-short pulses with sub-μJ energy at a repetition rate of 1 kHz.