Structural properties of lithium thio-germanate thin film electrolytes grown by radio frequency sputtering

In this study, lithium thio-germanate thin film electrolytes have been successfully prepared by radio frequency (RF) magnetron sputtering deposition in Ar gas atmospheres. The targets for RF sputtering were prepared by milling and pressing appropriate amounts of the melt-quenched starting materials in the nLi(2)S + GeS(2) (n = 1, 2, and 3) binary system. Approximately 1 μm thin films were grown on Ni coated Si (Ni/Si) substrates and pressed CsI pellets using 50 W power and 25 mtorr (～3.3 Pa) Ar gas pressures to prepare samples for Raman and Infrared (IR) spectroscopy, respectively. To improve the adhesion between the silicon substrate and the thin film electrolyte, a sputtered Ni layer (～120 nm) was used. The surface morphologies and thickness of the thin films were determined by field emission scanning electron microscopy (FE-SEM). The structural properties of the starting materials, target materials, and the grown thin films were examined by X-ray diffraction (XRD), Raman, and IR spectroscopy.     

Colloidal rotation near the colloidal glass transition

We compare, using single-particle optical imaging, trajectories of rotation and translation for micron-sized spheres in index-matched colloidal suspensions near their glass transition. Rotational trajectories, while they show intermittent caged behavior associated with supercooled and glassy behavior, explore a sufficiently wider phase space such that in the averaged mean-square angular displacement there appears no plateau regime, but instead sub-Fickian angular diffusion that follows an apparent power law in time. We infer translation and rotation time constants, the former being the time to diffuse a particle diameter and the latter being the time to rotate a full revolution. Correlation between time constants increases with increasing volume fraction, but unlike the case for molecular glasses, the rotation time constant slows more weakly than the translation time.     

A novel tungsten trioxide (WO3)/ITO porous nanocomposite for enhanced photo-catalytic water splitting

Hybrid nanocomposite films of ITO-coated, self-assembled porous nanostructures of tungsten trioxide (WO(3)) were fabricated using electrochemical anodization and sputtering. The morphology and chemical nature of the porous nanostructures were studied by Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS), respectively. The photoelectrochemical (PEC) properties of WO(3) porous nanostructures were studied in various alkaline electrolytes and compared with those of titania nanotubes. A new type of alkaline electrolyte containing a mixture of NaOH and KOH was proposed for the first time to the best of our knowledge and shown to improve the photocurrent response of the photoanodes. Here, we show that both the WO(3) nanostructures and titania nanotubes (used for comparison) exhibit superior photocurrent response in the mixture of NaOH and KOH than in other alkaline electrolytes. The WO(3) porous nanostructures suffered from surface corrosion resulting in a huge reduction in the photocurrent density as a function of time in the alkaline electrolytes. However, with a protective coating of ITO (100 nm), the surface corrosion of WO(3) porous nanostructures reduced drastically. A tremendous increase in the photocurrent density of as much as 340% was observed after the ITO was applied to the WO(3) porous nanostructures. The results suggest that the hybrid ITO/WO(3) nanocomposites could be potentially coupled with titania nanotubes in a multi-junction PEC cell to expand the light absorption capability in the solar spectrum for water splitting to generate hydrogen.     

Photoactivated capture molecule immobilization in plasmonic nanoapertures in the ultraviolet

We demonstrate a photoactivated surface coupling scheme for achieving spatial overlap between biomolecules of interest and optical near field excitation. Using aluminium nanoapertures, we obtained increased coupling efficiency of biotinylated capture probe oligos to the photoactivated surface due to ~3× nanoaperture enhancement of UV light. We further validate DNA sensor functionality via the hybridization of Cy-5 labeled target oligos, with up to 8× fluorescence enhancement obtained from a commercial microarray scanner. This generic photoimmobilization strategy is an essential step to realizing miniaturized plasmon enhanced detection arrays by virtue of localizing capture molecules to the region of plasmonic enhancement.     

Microwave cavity perturbation technique: Part I: Principles

This report reviews the analysis used to extract the complex conductivity of a compound from a microwave cavity perturbation measurement. We intend to present a generalized treatment valid for any spheroidally shaped sample of arbitrary conductivity which is placed at either the electric or magnetic field antinode of the cavity. To begin with, we establish the relationship between the measured parameters and the conductivity for a spherical sample. Next, we extend these results to the case of spheroids; and for the first time, we cover all different configurations that one can possibly use to study an arbitrary conducting sample inside a cavity: in particular, all possible orientations of the sample with respect to the applied field are solved.     

Microwave cavity perturbation technique: Part III: Applications

The resonant cavity perturbation method as described in the preceding two parts of this series is applied to study the electrodynamical properties of different materials in the microwave and millimeter wave spectral range. We briefly discuss the relevant uncertainties which are asociated with the different measurement techniques and we find that employing the amplitude technique it is possible to measure both the width and frequency to nearly the same precision. We then demonstrate the broad range of applicability of this technique by showing results obtained on several different materials, ranging from an insulator to a superconductor. The performance limitations of this technique are discussed in detail.     

A reversal index for tournament matrices

Given a tournament matrix T, its reversal indexi_R(T), is the minimum k such that the reversal of the orientation of k arcs in the directed graph associated with T results in a reducible matrix. We give a formula for i_R(T) in terms of the score vector of T which generalizes a simple criterion for a tournament matrix to be irreducible. We show that i_R(T)≤[(n-1)/2] for any tournament matrix T of order n, with equality holding if and only if T is regular or almost regular, according as n is odd or even. We construct, for each k between 1 and [(n-1)/2], a tournament matrix of order n whose reversal index is k. Finally, we suggest a few problems.     

Estimating a Markov Transition Matrix from Observational Data

Markov chains are frequently used in Operational Research to describe how a system changes over time, its behaviour being governed by its transition matrix. This paper describes a technique for finding a maximum likelihood estimate for such a transition matrix when a system is observed at infrequent time intervals. The technique is called the EM Algorithm which, for this kind of problem, has distinct advantages over other methods of optimization.