Aromatisierung von cytclohexenon-derivaten über selenorganische zwischenstufen

Reaction of the hydroaromatic compounds ($\text{1a}$) and ($\text{3a}$) with lithium-diisopropylamide followed by phenylselenenyl chloride gives the selenides ($\text{1b}$) and ($\text{1c}$) resp. ($\text{3b}$), which form exclusively the phenols ($\text{4}$) resp. ($\text{6}$) after oxidation with 3-chloroperbenzoic acid in the presence of 3,5-dimethoxyaniline ($\text{7a}$).     

Pure and doped lanthanum cobaltites obtained by combustion method

We report the synthesis of La_1−xSr_xCoO₃ nanopowders by solution combustion method using metal nitrates and -alanine (alanine method) or urea (urea method) as fuel. The influence of metal nitrates/organic substance molar ratio and the type of fuel was investigated. The isolated complex precursors were characterized by atomic absorption spectroscopy (AAS), FT-IR spectra and DTA–TG analysis. The La_1−xSr_xCoO₃ (x = 0–0.3) powders were characterized by X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray analysis (SEM–EDX), as well as by specific surface area measurements. XRD patterns indicate the formation of single-phase LaCoO₃ (rhombohedral) when as-synthesized powders were calcined at 873 K, 3 h in the case of the alanine method and at 1073 K, 3 h for urea-based system. Also, strontium doped lanthanum cobaltites obtained by both methods at 1273 K are single phase with rhombohedral perovskite-like structure as XRD data have proved. SEM investigation of pure and doped lanthanum cobaltites reveal that the samples prepared by both methods have fine particles with tendency of agglomerates formation with different shapes, spongy aspect and high porosity. La_1−xSr_xCoO₃ nanopowders obtained by alanine method have larger specific surface area values than those prepared by urea method.     

Post-source decay in the analysis of polystyrene by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Various secondary series are observed in matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectra of polystyrene. The number and positions of the series depend on the choice of matrix and added cation. For a given treatment, series observed in linear mode are not necessarily observed in reflectron mode, and vice versa. Post-source decay analysis was used to determine that the secondary series arise at least in part from formation and decay of adducts of polystyrene with matrix species. There is some treatment-to-treatment variation, but adduct formation and decay were observed for all tested treatments. The multiplicity of secondary series makes it unclear whether post-source decay occurs for the main series (polystyrene + cation)⁺ ions under the conditions normally used for polystyrene analysis. Such ions do undergo post-source decay at laser fluences greater than normally used. Although only polystyrene was investigated in this work, other polymers may also produce adduct and decay series in MALDI analysis. Their presence can mask the presence of minor components in a sample, but at least as observed here, do not have a strong influence on molecular mass determinations.     

Cross-linking dendrimers with allyl ether end-groups using the ring-closing metathesis reaction

A third generation Frechet-type dendrimer containing 24 allyl ether end-groups was synthesized, cross-linked using the ring-closing metathesis (RCM) reaction, and the core was removed hydrolytically without significant fragmentation. The results are analogous to those previously reported for homoallyl ether dendrimers (Wendland, M. S.; Zimmerman, S. C. J. Am. Chem. Soc. 1999, 121, 1389-1390) suggesting that the less readily available homoallyl ether dendrimers can be replaced by their allyl ethers analogues in a range of applications.     

Nonlinear desingularization in certain free-boundary problems

We consider a nonlinear, elliptic, free-boundary problem involving an initially unknown setA that represents, for example, the cross-section of a steady vortex ring or of a confined plasma in equilibrium. The solutions are characterized by a variational principle which allows us to describe their behaviour under a limiting process such that the diameter ofA tends to zero, while the solutions degenerate to the solution of a related linear problem. This limiting solution is the sum of the Green function of the linear operator and of a smooth function satisfying the boundary conditions. Mathematically speaking, this limiting process, that we call nonlinear desingularization, is a novel kind of bifurcation phenomenon since the nonlinear effect here involves smoothing the singularity of the associated linear problem.Research partially supported by A FOSR and NSF grants     

New fluorescent probes for testing combinatorial catalysts with phosphodiesterase and esterase activities

Combinatorial development of new catalysts with phosphodiesterase and esterase activities requires specific fluorescent probes for rapid visual detection of hydrolytic activity. Such fluorescent probes have been synthesized with special attention to solubility in water and stability towards spontaneous hydrolysis at a given pH. The probes reported here include compound 5 based on a fluorescein fluorophore, compound 12 for FRET-detection of phosphodiester hydrolysis and compound 25 based on a quinolinium fluorophore.     

Organometallic complex compounds,part 6(1). Property-specific ligand control of stability and reactivity of (1,3-dimethyl-η3-allyl)methylnickel-ligand complexes. Separation of electronic and steric effects

Summary The property-specific ligand control of 28 ligands on the decomposition temperatures in solution, measured by d.t.a. of a four-coordinate nickel(II)-complex is reported. A quantitative separation of electronic and steric effects by a multilinear regression analysis (75% electronic and 25% steric influence for the chosen ligands) is presented. The controlling effect of the selectivity on the decomposition (fraction of the C-C-linked product) (25 P-ligands) leads to an electronic: steric ratio of the property-specific ligand control of 5545 for the chosen ligands. An increase in the relative acceptor character of the P-ligands relatively destabilizes the complexes and thereby favours formation of a C-C-bond. An increase in steric hindrance also favours C-C-bond formation. A method for revising the steric parameter of P-ligands is presented and is used to correct the -value of (PhCH₂)₃P is corrected to 135°. SCCC-MO-calculations for testing the chemical reasoning of the separated electronic and steric ligand property control are shown.     

Characterization of structural transitions in the SLS/decanol/water system

The ternary system sodium-dodecylsulphate (SLS)/decanol/water has been investigated at three different water contents and varying ratios of cosurfactant to surfactant by means of polarized optical microscopy,²H-NMR quadrupole splittings and small angle x-ray scattering. Upon addition of decanol a hexagonal phase transforms into a lamellar phase. For the highest water content of 0.65 no intermediate two-phase regions are detected but nematic phases are formed between. The lamellar phase at low cosurfactant content is very sensitive to changes of temperature and seems to be a so-called defective one with curved interfaces. From the scaling behavior it is concluded that the building units seem to be ribbons of increasing width on addition of cosurfactant or amphiphilic substance. By reaching a decanol mole fraction of 0.4 a classical lamellar phase with well-known behavior is formed. During these transformations the position of the first diffraction maximum changes gradually irrespective of phase transitions. The maximum mole fraction of cosurfactant the lamellar phase of our system can incorporate is 0.77.     

Scanning force microscopy based rapid force curve acquisition on supported lipid bilayers: experiments and simulations using pulsed force mode.

In situ pulsed force mode scanning force microscopy (PFM-SFM) images of phase separated solid-supported lipid bilayers are discussed with the help of computer simulations. Simultaneous imaging of material properties and topography in a liquid environment by means of PFM-SFM is severely hampered by hydrodynamic damping of the cantilever. Stiffness and adhesion images of solid-supported membranes consisting of cholesterol, sphingomyelin, and 1,2-dioleyl-phosphatidylcholine obtained in aqueous solution exhibit contrast inversion of adhesion and stiff. ness images depending on parameters such as driving frequency, amplitude, and trigger setting. Simulations using a simple harmonic oscillator model explain experimental findings and give a deeper insight into the way PFM-SFM experiments have to be performed in order to obtain interpretable results and hence pave the way for reliable material contrast imaging at high speed.     

FOURIER TRANSFORM INFRARED SPECTROELECTROCHEMISTRY OF THE BACTERIOCHLOROPHYLL a ANION RADICAL

Abstract— Fourier transform infrared (FTIR) difference spectroscopy of the electrochemically generated anion radical of bacteriochlorophyll a was used to follow the molecular changes upon one-electron reduction. An IR spectroelectrochemical cell was constructed, allowing in situ electrolysis in connection with spectroscopic investigations from 200 to 10 000 nm. FTIR difference spectra of the BChl a anion formation in THF d₈ at U =+0.9 V (as determined by ferrocene calibration) were obtained. After complete formation of the radical, the reverse process was followed. Comparison of visible and IR spectra of the reduction and re-oxidation processes indicates that more than 90% of the BChl a anion could be formed with 90% of it being reversible. The main IR absorbance changes are observed for the conjugated and even for the non-conjugated C=O groups of BChl a . These results demonstrate the use of the combination of FTIR spectroscopy and electrochemistry for the characterization of radicals of the isolated pigments and of their in vivo bonding to the protein environment.