The specific heat capacities of V2O5/P2O5-based glasses

The specific heat capacities of a series of V₂O₅/P₂O₅-based glasses have been measured in the approximate temperature range 3–300 K. The proportions of the host constituents were varied and the effects produced by adding oxides of copper, titanium and sodium were examined. The measurements were extended to investigate the influence of fast neutron irradiation upon the specific heat capacity of pure, initially crystalline V₂O₅.The observations are consistent with a spectrum of background vibrations, the form of which is temperature dependent. At intermediate temperatures the vibrations were consistent with the glasses displaying predominantly chain-like characteristics. With reduction to lower temperatures the vibrational behaviour increasingly resembled that of solids displaying three-dimensional characteristics. The temperature dependence of the specific heat capacity at the lowest temperatures was consistent with the presence of a narrow band of low-frequency modes centred upon 1.67 × 10¹¹ s^?1, the density of which increased with phosphorus content. From observations of the density of these modes in the doped specimens, it was concluded that the role of copper wass largely that of a network former, whereas titanium and sodium were essentially network modifiers.     

Separation of Dihydro-Isocoumarins and Dihydro-Stilbenoids from Hydrangea macrophylla ssp. serrata by Use of Counter-Current Chromatography

Previously, different Hydrangea macrophylla ssp. serrata cultivars were investigated by untargeted LC-MS analysis. From this, a list of tentatively identified and unknown compounds that differ significantly between these cultivars was obtained. Due to the lack of reference compounds, especially for dihydro-isocoumarins, we aimed to isolate and structurally characterise these compounds from the cultivar ‘Yae-no-amacha’ using NMR and LC-MS methods. For purification and isolation, counter-current chromatography was used in combination with reversed-phase preparative HPLC as an orthogonal and enhanced purification workflow. Thirteen dihydro-isocoumarins in combination with other metabolites could be isolated and structurally identified. Particularly interesting was the clarification of dihydrostilbenoid glycosides, which were described for the first time in H. macrophylla ssp. serrata. These results will help us in further studies on the biological interpretation of our data.     

Laser–Induced Fluorescence Detection of Carbamates Traces in Water

The absorption and fluorescence spectra of carbaryl (CB), carbofuran (CF) and carbendazim (MBC) have been studied. Fluorescence lifetime and fluorescence quantum yields are also reported as well as the influence of pH, solvent and presence of humic acids on fluorescence. The limit of detection (LD) of the three compounds has been measured by direct analysis by laser-induced fluorescence (LIF) using a pulsed YAG laser with an Optical Parametric Oscillator (OPO) as excitation source and an Intensified Charged Coupled Device (ICCD) camera for the fluorescence detection. Instrumental LD found for CB, for MBC and for CF are respectively 4, 50 and 1000 ng L⁻¹. In tap water, the LD obtained is 800 ng L⁻¹ for MBC and 20,000 ng L⁻¹ for CF. For CB, the use of a time shift between excitation and emission allows to reach a LD of 20 ng L⁻¹ in tap water.     

Accurate quantification of the redox-sensitive GSH/GSSG ratios in the yeast Pichia pastoris by HILIC–MS/MS

A novel method for the simultaneous quantification of both glutathione (GSH) and its oxidized form glutathione disulfide (GSSG) by hydrophilic interaction chromatography–MS/MS has been developed and is critically discussed. Internal standardization based on isotopically labeled standards for both analytes is an absolute prerequisite for accurate quantification of this redox pair. Hence, a highly efficient and selective miniaturized procedure for the synthesis of isotopically labeled GSSG from commercially available glutathione-(glycine-¹³C₂,¹⁵N) was established using H₂O₂ as oxidant and NaI as catalyst. Moreover, a tool is presented to monitor and hence uncover artifactual GSSG formation due to oxidation of GSH during sample preparation, which is the main source of systematic error in GSSG analysis. For this purpose, we propose to monitor the oxidation product formed by reaction of naturally occurring GSH with the isotopically labeled GSH used as internal standard. For the determination of GSH/GSSG ratios in yeast, different extraction methods based on (1) hot extraction with aqueous, acidic, or organic solvents, (2) mechanical cell lysis, and (3) extraction at subambient temperature were investigated in terms of recovery, extraction efficiency, and artifactual formation of GSSG. Total combined uncertainties of as low as 25–30 % (coverage factor?=?2) for the determination of GSH/GSSG ratios without derivatization were made possible by the addition of the internal standards early in the analytical procedure (before extraction) and immediate analysis of the analytes.     

Inactivation of Vaccinia Virus by Natural Sunlight and by Artificial UVB Radiation

This study determined the sensitivity of vaccinia virus, an orthopox virus commonly used as a surrogate for variola virus (etiological agent of smallpox), exposed to UVB radiation emitted by a solar simulator, or to direct natural sunlight. The data obtained indicate that: (1) the virucidal effect of natural sunlight can be mimicked adequately by an artificial light source with similar spectral characteristics in the UVB, (2) viral sensitivity to UVB or to solar radiation can be correlated with experimental data previously obtained with UVC, (3) the correlation factor between virus inactivation by solar radiation (measured at 300 ± 5 nm) and by UVC (254 nm) is between 33 and 60, and (4) the sensitivity of viruses either dry on glass surfaces or in liquid suspension is similar when in the presence of similar amounts of cellular debris and growth media. The findings reported in this study should assist in estimating the threat posed by the persistence of virus during epidemics or after an accidental or intentional release.     

A quantitative HPLC–MS/MS method for studying internal concentrations and toxicokinetics of 34 polar analytes in zebrafish (Danio rerio) embryos

An analytical method using high-performance liquid chromatography–tandem mass spectrometry was developed to determine internal concentrations of 34 test compounds such as pharmaceuticals and pesticides in zebrafish embryos (ZFE), among them, cimetidine, 2,4-dichlorophenoxyacetic acid, metoprolol, atropine and phenytoin. For qualification and quantification, multiple reaction monitoring mode was used. The linear range extends from 0.075 ng/mL for thiacloprid and metazachlor and 7.5 ng/mL for coniine and clofibrate to 250 ng/mL for many of the test compounds. Matrix effects were strongest for nicotine, but never exceeded ±20 % for any of the developmental stages of the ZFE. Method recoveries ranged from 90 to 110 % from an analysis of nine pooled ZFE. These findings together with the simple sample preparation mean this approach is suitable for the determination of internal concentrations from only nine individual ZFE in all life stages up to 96 h post-fertilization. Exemplarily, the time course of the internal concentrations of clofibric acid, metribuzin and benzocaine in ZFE was studied over 96 h, and three different patterns were distinguished, on the basis of the speed and extent of uptake and whether or not a steady state was reached. Decreasing internal concentrations may be due to metabolism in the ZFE.

A regularization approach for damage models based on a displacement gradient

Common material models that take into account softening effects due to damage encounter the problem of ill-posed boundary value problems if no regularization is applied. This condition leads to a non-unique solution for the resulting algebraic system and a strong mesh dependence of the numerical results. A possible solution approach to prevent this problem is to apply regularization techniques that take into account the non-local behavior of the damage [1]. For this purpose a field function is used to couple the local damage parameter to a non-local level, in which differences between the local and non-local parameter as well as the gradient of the non-local parameter can be penalized. In contrast, we present a novel approach to regularization in which no field function is needed [2]. Hereto, the regularization is carried out by means of the divergence of the displacements and no additional quantity is necessary since the displacements are already defined on a non-local level. The idea is that with an increasing value of the damage the element's volume will increase as well. This is a result of the softening due to the occurring damage. The increasing volume can be measured by the divergence of the displacements which can be penalized by an additional energy part. The lack of any field function and the regularization by the use of the divergence of the displacements entails several numerical advantages: the computational effort is considerably reduced and the convergence behavior is improved as well. Naturally, the numerical results are mesh independent due to the regularization. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Application of a cohesive zone element for the prediction of damage in nano/micro coating

Many tools in production technology are nowadays coated to obtain a satisfactory lifetime and degradation resistance. Therefore, the main goal of this study is to investigate antiadhesive and wear resistant coatings made of ceramics, plastics and metals produced by High Power Pulsed Magnetron Sputtering (HPPMS) technique [1]. A cohesive zone element technique (CZ) is applied to model the interactions of the coatings and the substrate surfaces (see [2]). This goes along with the investigations of the delamination and failure behavior of the involved surfaces. To illustrate the applicability of the model, several structural simulations are performed. The developed CZ element model is capable of modeling the separation, the contact and also the irreversible reloading conditions in both normal and tangential directions [3]. The model is further developed to be applicable for different structures including different bonding behaviors, with a higher stability. The talk concludes with a detailed discussion of the numerical results of different material and interface properties. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)