Quantitative analysis of small pharmaceutical drugs using a high repetition rate laser matrix-assisted laser/desorption ionization source

In this work, a high repetition rate laser matrix-assisted laser desorption/ionization (MALDI) source is studied on a quadrupole-time-of-flight (QqTOF) and a triple quadrupole (QqQ) mass spectrometer for rapid quantification of small pharmaceutical drugs. The high repetition rate laser allows an up to 100-fold higher pulse frequency as compared with regular MALDI lasers, resulting in much larger sample throughput and number of accumulated spectra. This increases the reproducibility of signal intensities considerably, with average values being around 5% relative standard deviation after taking into account the area ratio of the analyte to an internal standard. Experiments were conducted in MS/MS mode to circumvent the large chemical background due to MALDI matrix ions in the low mass range. The dynamic range of calibration curves on the QqTOF mass spectrometer extended over at least two orders of magnitude, whereas on the QqQ it extended over at least three orders of magnitude. Detection limits ranged from 60-400 pg/microL on the QqTOF and from 6-70 pg/microL on the QqQ for a series of benzodiazepines. The benzodiazepine content of commercial pill formulations was quantified, and less than 5% error was obtained between the present method and the manufacturer's certified values. Furthermore, a high sample throughput was achieved with this method, so that a single MALDI spot could be quantitatively scanned in as little as 15 s, and an entire 96-well MALDI plate in 24 min.     

Regio- and Enantioselective Substitution of Acyclic Allylic Sulfoximines with Butylcopper in the Presence of Lithium Iodide and Boron Trifluoride

Enantiomerically pure N-methyl-, N-benzyl-, and N-(methoxyethyl)-S-(phenyl)cinnamylsulfoximines as well as the corresponding crotylsulfoximines have been prepared from N-methyl-, N-benzyl-, and N-(methoxyethyl)-S-(lithiomethyl)sulfoximines and carbonyl compounds by an addition-elimination-isomerization reaction sequence. Under basic conditions, complete isomerization of the vinylic sulfoximines, obtained as intermediates, to the corresponding allylic sulfoximines takes place. Chromatographically separable mixtures of (E) and (Z) allylic sulfoximines were isolated in the case of beta,gamma-disubstituted allylic sulfoximines. The (E/Z) ratio depends on the nature of the substituents in the beta- and gamma-positions, and the equilibrium amount of the (Z) isomer varies from 68% to nil. The allylic N-methylsulfoximines do not racemize thermally, and their rearrangement to the corresponding allylic sulfinamides is negligible. Upon prolonged treatment with boron trifluoride at low temperatures allylic N-methylsulfoximines are recovered unchanged. The crystal structure of S-(3,4-dihydronaphthalen-2-ylmethyl)-N-methyl-S-phenylsulfoximine was determined. Reaction of the allylic sulfoximines with butylcopper in the presence of lithium iodide and boron trifluoride leads with very high gamma-selectivities and moderate to high enantioselectivities to the corresponding chiral alkenes. Their configuration was determined by chemical correlation through ozonolysis to the corresponding carbonyl compounds. The asymmetric induction exerted by the chiral N-methyl-S-phenylsulfoximine group strongly depends on the double bond configuration and the substituents in the beta- and gamma-positions. The (E) allylic sulfoximines are substituted with low to moderate enantioselectivities (2-66%), whereas the (Z) allylic sulfoximines react with much higher enantioselectivities (69-92%). Interestingly, substitution of the beta-methyl-gamma-phenyl-substituted (Z) allylic sulfoximine and its beta-phenyl-gamma-methyl isomer proceeded with almost the same degree of asymmetric induction but with the opposite sense. Replacement of the N-methyl group by a benzyl or a methoxyethyl group has no significant influence on the regio- and enantioselectivity of the substitution.     

Bimetallic complexes from amphoteric group 13/15 ligands: syntheses and X-ray crystal structures

Bimetallic, pentel-bridged complexes of the type [(dmap)Me2M-E(SiMe3)2-M'(CO)n] (M=Al, Ga; E=P, As, Sb; M'=Cr, Fe, Ni; DMAP=4-(dimethylamino)pyridine) are formed by reactions of DMAP-coordinated monomeric Group 13/15 compounds [(dmap)Me2M-E(SiMe3)2] with the transition metal complexes [(Me3N)Cr(CO)5], [Fe3(CO)12], and [Ni(CO)4]. For the first time, this reaction offers a general pathway to compounds containing a Group 13 metal and a transition metal bridged by a pentel atom. Complexes prepared in this way were characterized by IR and multinuclear NMR spectroscopy and by single-crystal X-ray structure analysis. Their electronic and structural properties are discussed in detail. The Group 13/15 ligands are very weak acceptors, which is likely to be due to the electropositive Group 13 metal, and the complexes feature comparatively long pentel-transition metal bonds. In addition, the synthesis and structural characterization of the parent DMAP-coordinated gallanes [(dmap)Me2Ga-E(SiMe3)2] (E=P, As) are reported.     

Determination of carbonyl compounds in exhaust gas by using a modified DNPH-method

The determination of carbonyl compounds in gaseous samples is usually accomplished by enrichment methods, in which 2,4-dinitrophenyl-hydrazine (DNPH) as a derivatization reagent has become established to a large extent. However, the conventional methods of DNPH-impingers and of DNPH-cartridges are applicable to emission measurements in a limited way only, depending on the NO₂-concentration in the exhaust gas. It could be proved that DNPH-derivatives, as well as DNPH, are also decomposed by NO₂ at a different speed, in which the hydrazones of unsaturated carbonyl compounds are probably more sensitive than those of the saturated carbonyl compounds. In view of this fact, the collecting methods had to be modified to avoid losses with the enrichment. The analysis of the compounds is carried out by HPLC with an effective gradient-system which is able to separate and detect the carbonyl compounds in exhaust gas within 16 min. Furthermore, a simple working-up procedure is presented which facilitates a parallel analysis by GC.     

Nickel-Catalyzed Preparations of Functionalized Organozincs

The reaction of primary alkyl bromides or chlorides with diethylzinc in the presence of Ni(acac)(2) (5 mol %) furnishes the corresponding alkylzinc halides (X = Br, Cl) via a halogen-zinc exchange reaction. The treatment of terminal alkenes with diethylzinc (neat, 25-60 degrees C) in the presence of Ni(acac)(2) as a catalyst (1-5 mol %) and 1,5-cyclooctadiene (COD) affords the corresponding dialkylzincs via a hydrozincation reaction. Whereas the conversion for simple alkenes bearing a remote functionality reaches 40 to 63%, the hydrozincation of allylic, homoallylic alcohols and allylic amines proceeds very efficiently (85-95% conversion). All the zinc organometallics obtained react with various electrophiles (allylic halides, enones, acid chlorides, alkynyl halides, ethyl propiolate) after transmetalation with CuCN.2LiCl. In the presence of the chiral catalyst 12, the dialkylzincs prepared add to aldehydes with high enantioselectivity.     

Fine structure and hyperfine structure in the excited configuration 5p 26s of the antimony I spectrum

By optical interference and VUV spectroscopy the doublet system of SbI 5p ²6s was investigated, so that now the hyperfinestructure of all 8 levels of 5p ²6s (A- andB-splitting constants) are known. From the analysis we receive a spin-orbit parameter ζ_5p =3,538(57) cm^?1 and from the hyperfine-analysis single electron splitting constantsa _5p ⁰¹ =52.4(4.6),a _5p ¹⁰ =?1.6(7.3),a _5p ¹² =72.3(2.3),a _6s ¹⁰ =91.7(4.1),b _5p ⁰² =?49.6(1.1) andb _5p ¹¹ =30.4(3.2) (all values in mK). For all calculations in the fs- and hfs-analysis the 5p ²6s ² D _3/2 has to be excluded (see discussion). With the figures given above the quadrupole moment¹²¹ Q(5p ²6s)=?0.44(3) barn was obtained. It is in good agreement with the¹²¹ Q(5p ³). For the core-polarization by the 5p electron in the innerfieldns-shells (n=1, 2, 3, 4, 5) and the unpaired 6s electron a field of +500(300) kG was obtained.     

Synthesis and auration of primary and di-primary heteroaryl-phosphines

Convenient high-yield syntheses of the primary and di-primary heteroaryl-phosphines R-PH2 and H2P-R'-PH2(with R = 2-thienyl, 2-furyl, and R'= 2,5-thiophenediyl, 2,5-furandiyl, respectively) are presented. The products and a set of precursor molecules have been characterized by analytical and spectral data, and the crystal structures of selected molecules have been determined: 2-C4H3O-PCl2, 2,5-(Cl2P)2C4H2O, 2,5-[(Et2N)2P]2C4H2E (with E = O, S). In the crystals, the two molecules with -PCl2 substituents adopt trans conformations, while the other two have the -P(NEt2)2 groups rotated into a twist conformation. The reaction of the thienyl compounds with tris[(tert-phosphine)gold]oxonium tetrafluoroborates gave almost quantitative yields of the tri- and hexanuclear gold complexes, respectively: {2-C4H3S-P[Au(PR3)]3}+BF4- and [2,5-{[(R3P)Au]3P}2C4H2S]2+(BF4(-)2, (R =tBu, Ph). The structures of the compounds with R3P =tBu3P ligands have been determined. In both cases the [2-C4H3/2S-P] units cap triangles of gold atoms in an array that can be described as three [Au(PR3)]+ cations bridged by a phosphido dianion (RP)2-.     

Liquid Metal Superelastic Fiber Mat Enabling Highly Permeable Wearable Electronics Toward Comfortable e-Skins

Low water vapor and air permeability is a persistent challenge in wearable and on-skin electronics, as it reduces wearing comfort, and leads to skin irritation and inflammation in the long term. To tackle this issue, Zheng and coworkers designed a stretchable conductor based on an elastomeric fiber mat coated by liquid metal. After simple activation via stretching, the flexible conductor was endowed with excellent permeability, good stretchability, exceptional electrical stability, and good biocompatibility, ascribed to the mesh-like structure and the vertically buckled structure of the liquid metal. Based on the intriguing properties of the material, it was employed in a multi-functional wearable device, able to detect the heartbeat and sweat while serving as a heating device. The corresponding research has been published in Nature Materials and can be accessed at https://doi.org/10.1038/s41563-020-00902-3.     

Screening an In-House Isoquinoline Alkaloids Library for New Blockers of Voltage-Gated Na+ Channels Using Voltage Sensor Fluorescent Probes: Hits and Biases

Voltage-gated Na⁺ (Na_V) channels are significant therapeutic targets for the treatment of cardiac and neurological disorders, thus promoting the search for novel Na_V channel ligands. With the objective of discovering new blockers of Na_V channel ligands, we screened an In-House vegetal alkaloid library using fluorescence cell-based assays. We screened 62 isoquinoline alkaloids (IA) for their ability to decrease the FRET signal of voltage sensor probes (VSP), which were induced by the activation of Na_V channels with batrachotoxin (BTX) in GH3b6 cells. This led to the selection of five IA: liriodenine, oxostephanine, thalmiculine, protopine, and bebeerine, inhibiting the BTX-induced VSP signal with micromolar IC₅₀. These five alkaloids were then assayed using the Na⁺ fluorescent probe ANG-2 and the patch-clamp technique. Only oxostephanine and liriodenine were able to inhibit the BTX-induced ANG-2 signal in HEK293-hNa_V1.3 cells. Indeed, liriodenine and oxostephanine decreased the effects of BTX on Na⁺ currents elicited by the hNa_V1.3 channel, suggesting that conformation change induced by BTX binding could induce a bias in fluorescent assays. However, among the five IA selected in the VSP assay, only bebeerine exhibited strong inhibitory effects against Na⁺ currents elicited by the hNav1.2 and hNav1.6 channels, with IC₅₀ values below 10 µM. So far, bebeerine is the first BBIQ to have been reported to block Na_V channels, with promising therapeutical applications.