Partitioning of metals between the aqueous phase and suspended insoluble material in fog droplets

This paper discusses the partitioning of metals (K, Na, Ca, Mg, Al, Cu, Fe, Pb and Zn) between the aqueous phase and the suspended insoluble material in fog samples collected in the Po Valley during two extensive fields campaigns. Metals represent on average 11% of the mass of suspended insoluble matter, while the main component is carbon (both organic carbon, OC = 35%, and black carbon, BC = 8%). The unaccounted suspended matter mass is very high, on average 46%, and is attributable to non metallic species, such as O and N and of Si. The principal metals in the insoluble suspended fraction are Fe and Al (2-5%), while the contributions of other metals (Na, Mg, Cu, Pb and Zn) are lower than 1%. Ca and K exhibited high blank values and could not be detected above blank detection limit threshold. The main components in the aqueous phase are NO3- (34%), WSOC (23%), SO4(2-) (18%) and NH4+ (19%), while trace metals and remaining cations and anions accounted for less than 1% of solute mass. The main dissolved trace metals in fog droplets are Zn, Al and Fe, while the main metallic cations are Na and Ca. Fe and Al are the only metals preferentially distributed in the suspended insoluble matter of fog droplets (partitioning ratio respectively 37% and 33%). All other metals are mostly dissolved in the aqueous phase (mean partitioning ratios of Mg, Pb, Zn, Cu and Na are 69%, 70%, 77%, 81% and 87%). These findings are in agreement with literature data on metal speciation in cloud and rain samples. The dependence of partitioning ratios on pH is investigated for the different metals, with only Al showing a clear partitioning ratio decrease with increasing pH. Conversely, the other metals show no dependence or a complex and highly variable behaviour. The partitioning ratio of iron (mean 37%) observed in the Po Valley fog samples is much higher than the water extractable iron in aerosol particles (typically 1-2 %): this fact can be explained by differences in the aerosol sources and composition among sites and by chemical processes in the aqueous phase, such as complexation and redox reactions involving organic ligands (oxalate, or other organic acids as humic-like organic matter) which may promote Fe solubility.     

Rh(I) coordination chemistry of chiral alpha-aminophosphine(eta6-arene)chromium tricarbonyl ligands

The diastereoselective addition of Ph(2)PH to the chiral ortho-substituted eta(6)-benzaldimine complexes (eta(6)-o-X-C(6)H(4)CH=NAr)Cr(CO)(3) (1, X = MeO, Ar = p-C(6)H(4)OMe; 2, X = Cl, Ar = Ph) leads to the formation of the corresponding chiral aminophosphines (alpha-P,N) Ph(2)P-CH(Ar(1))-NHAr(2) (3, Ar(1) = o-C(6)H(4)(OCH(3))[Cr(CO)(3)], Ar(2) = p-C(6)H(4)OCH(3); 4, Ar(1) = o-C(6)H(4)Cl[Cr(CO)(3)], Ar(2) = Ph) in equilibrium with the starting materials. The uncomplexed benzaldimine (o-ClC(6)H(4)CH=NPh), 2', analogously produces an equilibrium amount of the corresponding aminophosphine Ph(2)P-CH(Ar(1))-NHAr(2) (4', Ar(1) = o-C(6)H(4)Cl, Ar(2) = Ph). Depending on the equilibrium constant, the subsequent addition of (1)/(2) equiv of [RhCl(COD)](2) (COD = 1,5-cyclooctadiene) leads to either Ph(2)PH oxidative addition in the case of 3 or to the corresponding [RhCl(COD)(alpha-P,N)] complexes [RhCl(COD)(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)] (5) and [RhCl(COD)(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)] (5') in the cases of the aminophosphines 4 and 4'. The addition of the latter ligands, as racemic mixtures, to (1)/(4) equiv of [Rh(CO)(2)Cl](2) leads to the [RhCl(CO)(alpha-P,N)(2)] complexes [RhCO(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)(2)Cl] (7) or [RhCO(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)(2)Cl] (7') as mixtures of (R(C),S(C))/(S(C),R(C)) and (R(C),R(C))/(S(C),S(C)) diastereomers. The rhodium complexes 5 and 7' have been fully characterized by IR and (31)P NMR spectroscopies and X-ray crystallography. These compounds exhibit intramolecular Rh-Cl.H-N interactions in the solid state and in solution. The stability of the new rhodium complexes has been studied under different CO pressures. Under 1 atm of CO, 5 is converted to an unstable complex [RhCl(CO)(2)(alpha-P,N)], 6, which undergoes ligand redistribution leading to 7 plus an unidentified complex. This reaction is inhibited under higher CO or syngas pressure, as confirmed by the observation of the same catalytic activity in hydroformylation when styrene was added to a catalytic mixture that was either freshly prepared or left standing for 20 h under high CO pressure.     

Synthesis, Chemical Characterization, and Molecular Structure of Au8{Fe(CO)4}4(dppe)2 and Au6Cu2{Fe(CO)4}4(dppe)2

The new Au₈{Fe(CO)₄}₄(P^P)₂ and Au₆Cu₂{Fe(CO)₄}₄(P^P)₂ (P^P=dppm, dppe) neutral cluster compounds were isolated in good yields by condensation of the [Au₃{Fe(CO)₄}₂(P^P)]^- anions with Au(SEt₂)Cl and CuCl, respectively, and have been characterized by IR, NMR and microanalyses. The molecular structures of Au₈{Fe(CO)₄}₄(dppe)₂ and Au₆Cu₂{Fe(CO)₄}₄(dppe)₂ have been determined by X-ray diffraction studies. Both molecules adopt a stereogeometry of the heavy atoms consisting of a triangulated and corrugated ribbon twisted around the elongation direction. Contrary to the expectations the latter displays the two copper atoms in the sites of highest connectivity. This implies that site exchange between copper and gold occurs during the synthesis.     

Conformational studies by dynamic NMR spectroscopy. Part 96: Stereomutations of highly hindered naphthylphenyl atropisomers in solution and in the solids

When a benzene ring bears two 2-methyl-1-naphthyl moieties in the para, meta or ortho positions as in 1,4-bis(2-methyl-1-naphthyl)benzene, 1, 1,3-bis(2-methyl-1-naphthyl)benzene, 2 and 1,2-bis(2-methyl-1-naphthyl)benzene 3, two rotational isomers (atropisomers) are generated, with the two naphthyl substituents in a syn or anti relationship. In the case of the para and meta derivatives (1 and 2, respectively) these atropisomers could not be separated but were detected by NMR spectroscopy, that also allowed the determination of their syn-anti interconversion barriers in solution (19.5 and 20.4 kcal mol⁻¹, respectively) and, in the case of 2, also in the solid state (26.7 kcal mol⁻¹). In the more hindered ortho derivative 3, the syn (meso) and anti (racemic) atropisomers interconvert in solution with a barrier (31.2 kcal mol⁻¹) sufficiently high to allow their physical separation. The racemic form could also be separated (by enantioselective HPLC) into the PP and MM enantiomers. Analysis of the corresponding CD spectra allowed the assignment of the absolute configuration. When three such naphthyl substituents are bonded to the phenyl in a meta relationship, two atropisomers in statistical proportions were observed: the anti (C_s symmetry) and the syn (C_3v symmetry) display a 3:1 ratio at the equilibrium in solution. This ratio is different in the solid state, as is the interconversion barrier (22.1 and 32.1 kcal mol⁻¹ in solution and in the solid, respectively).     

Synthesis of 5H-benzimidazo[1,2-a][1,3,4]thiadiazolo[2,3-d][1,3,5]triazin-5-one and 12H-benzimidazo[1,2-a]pyrimido[6,1-d][1,3,5]triazin-12-one,two new heterocyclic ring systems

2-(2,6-Dimethylpyrimidin-4-ylaminobenzimidazole) (VIIa) and 2-(1,3,4-thiadiazol-2-ylamino)benzimidazole (VIIb) underwent a ring-closure reaction with phosgene giving 1,3-dimethyl-12H-benzirnidazo[1,2-a]pyrirnido[6,1][-d][1,3,5]triazin-12-one (IIa) and 5H-benzimidazo[1,2-a][1,3,4]thiadiazolo[2,3-d][1,3,5]triazin-5-one (IIb) two hitherto unknown heterocyclic systems. A convenient synthesis of 2,6-dimethyl-4-aminopyrimidine is described.     

Synthesis of 2-oxazolines mediated by N,N′-diisopropylcarbodiimide

N-(β-Hydroxy)amides can be cyclised by reaction with diisopropylcarbodiimide (DIC) to give the corresponding 2-oxazolines in high yields. The reaction requires only very mild Lewis-acid catalysis (5 mol % Cu(OTf)₂) and can be accomplished with simple heating, or in very short reaction times under microwave irradiation.     

Gadolinium‐Decorated Silica Microspheres as Redox‐Responsive MRI Probes for Applications in Cell Therapy Follow‐Up

The redox microenvironment within a cell graft can be considered as an indicator to assess whether the graft is metabolically active or hypoxic. We present a redox‐responsive MRI probe based on porous silica microparticles whose surface has been decorated with a Gd‐chelate through a disulphide bridge. Such microparticles are designed to be interspersed with therapeutic cells within a biocompatible hydrogel. The onset of reducing conditions within the hydrogel is paralleled by an increased clearance of Gd, that can be detected by MRI.