A study of thin surface layers by multilayer Mössbauer spectroscopy /MMS/

A stacking Mössbauer technique, MMS has been applied for studying thin surface layers. The surface layers formed on the⁵⁷Fe film in aqueous solutions of corrosion inhibitors, such as zinc phosphate and barium metaborate, and in distilled water was studied by this method. It has been found that the corrosion is much slower in the presence of zinc phosphate and barium metaborate. XPS analysis suggests the formation of a mixed iron zinc phosphate on the surface of the⁵⁷Fe film after corrosion in a zinc phosphate solution.     

Reactions de photoaddition de benzo[b]selenophenes avec l'acetylene dicarboxylate de methyle et avec le dichloro-1,2 ethylene

Photoirradiated in presence of acetophenone, benzo[b]selenophene and its 3-methyl derivative add to dimethyl acetylenedicarboxylate. In each ease, the primary reaction product is unstable and has not been isolated. Photoexeited in its triplet state (the energy of which is in the neighbourhood of 69 $\text{kcal}\text{mole}$) benzo[b]selenophene and its 2- and 3-methyl, 2,3 dimethyl, 3 acetoxy and 2-methyl-3-acetoxy derivatives add to 1,2 dichloroethylene leading to cyclobutanes. Neither cyclo-addition occurs in absence of photosensitiser. Single-crystal X-ray analysis gave the structures of the two adducts of 3-acetoxybenzo[b]selenophene with trans-1,2-dichloroethylene. In both compounds the chlorine atoms are trans.     

Mechanism of the decomposition of cumenyl hydroperoxide under the influence of complexes of divalent copper with o-phenanthroline

Russian Chemical Bulletin -     

High-performance liquid chromatographic determination of diltiazem and four of its metabolites in plasma: evaluation of their stability

A rapid, specific and reproducible high-performance liquid chromatographic method was developed for the simultaneous determination of diltiazem and four of its metabolites in plasma. The method involves extraction with methyl tert.-butyl ether, back-extraction into 0.017 M phosphoric acid followed by reversed-phase chromatography on a 3-micron particle, 15-cm ODS column with UV detection at 237 nm. Overall the recovery of each compound was reproducible and greater than 85%. Calibration curves were linear over the concentration range 10-250 ng/ml, with within-day or between-day coefficients of variation not exceeding 12%. A stability study indicates that while diltiazem is stable for at least six weeks in frozen plasma, more than 30% degradation of the major metabolite, N-monodesmethyldiltiazem, was observed after four weeks at -20 degrees C. The assay procedure has been applied to monitoring of plasma levels in patients receiving chronic oral therapy.     

A case of oligomerization on attempted chlorination of an α-hydroxy acetal with the triphenylphosphine tetrachloromethane reagent

Treatment of methyl 3,5-dideoxy-β-$\text{D}$-$\text{erythro}$-pentofuranoside $\text{8}$ with the Ph₃P-CCl₄ reagent gave none of the expected 2-chloro derivative but a mixture of l→2 linked oligosaccharides, $\text{9}$, $\text{10}$ with some higher homologues, terminated by αa 2-chloro-2,3,5-trideoxy-α-$\text{D}$-$\text{threo}$-pentofuranosyl unit at the non reducing end.     

Die quantitative Bestimmung von Vanadin mittels aktivierter Katalyse

Zusammenfassung Es wurden zwei Verfahren ausgearbeitet, um Vanadin mit Hilfe von aktivierter Katalyse zu bestimmen. Die Methodik ist geeignet, kleinste Spuren von Vanadin (bis herab zu 0,0006) mit ausreichender Genauigkeit zu ermitteln. Es werden Beleganalysen mitgeteilt.

---

Summary Two procedures for the determination of vanadium have been worked out, based on activated catalysis, which allow minimal traces (down to 0,0006) of vanadium to be determined with adequate accuracy. Comparison analyses are given in the paper.

---

Résumé On a élaboré deux procédés pour exécuter le dosage du vanadium à l'aide d'une catalyse activée. La méthode est apte à la détermination des plus petites traces de vanadium (jusqu'à 0,0006) avec une précision suffisante. On communique des analyses documentaires.

     

5,6-Dimethoxy- und [4,5,6-Trimethoxy-benzo[b]-thienyl-(3)]-acylamine

Zusammenfassung Umsetzung von 5,6-Dimethoxy- und [4,5,6-Trimethoxy-benzo[b]thienyl-(3)]-essigsäure mit PCl₅ lieferte die methoxysubstituierten [Benzo[b]thienyl-(3)]-essigsäurechloride, die mit sekundären Aminen zu den entsprechenden Amiden reagierten.Die homologen Verbindungen mit einer C₃-Brücke wurden durchArndt-Eistert-Reaktion des Diazomethylketons in Gegenwart der entsprechenden sekundären Amine erhalten.

---

Reaction of 5.6-dimethoxy- and [4.5.6-trimethoxybenzo[b]-thienyl-(3)]-acetic acid with PCl₅ gave the methoxy-substituted [benzo[b]thienyl-(3)]-acetic acid chlorides, which reacted with secondary amines to the corresponding amides.The homologous compounds with a C₃-bridge were synthesized viaArndt-Eistert reaction of the diazomethyl ketone in presence of the corresponding secondary amines.

     

1,4 Addition to a perfluorinated cross-conjugated triene

Conclusions Perfluoro-(2-isobutenyl-1,1,4,4-tetramethyl-1,3-butadiene) yields 1,4 addition products both in nucleophilic addition and in radical chlorination.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1061–1064, May, 1979.     

Thermal degradation of copolymers of styrene and methyl-vinyl-silane by pyrolysis gas chromatography

Pyrolysis gas chromatographic investigations have been carried out on copolymers of styrene with trimethyl-vinyl-silane and of styrene with dimethyl-phenyl-vinyl-silane, in order to study the mechansims of thermal degradation and the copolymer structures. We have identified the pyrolysis products and measured their relative amounts. The experiments show that the controlling factor in the mechanism of the degradation is the nature of the side-group attached to the carbon atom at which chain scission occurs. If this side-group is phenyl, the main degradation process is depropagation; if it is if it is trimethyl-silyl or dimethyl-phenyl-silyl, intramolecular hydrogen abstraction followed by β scission becomes more important than depropagation. From the point of view of degradation mechanism, the nature of the side-group attached to the carbon atom from which the hydrogen is abstracted is of minor importance.We estimated the average copolymer block length from the amounts of products containing both comonomers as well as from the amounts of trimer composed of the same monomer.