Counterion exchange selectivity coefficients at water-in-oil microemulsion interface

The counterion binding at a water/Aerosol-OT (AOT)/heptane microemulsion interface was treated in the context of the pseudo-phase ion exchange formalism. Two approaches were used to determine the selectivity coefficient for copper/sodium counterion binding at the AOT microemulsion interface: measurements of the Cu(II) concentration taken up by the reverse micelle in a Winsor II microemulsion system and steady-state emission quenching measurements of an anionic water-solubilized probe, the tris-(4,4'-dicarboxy-2,2'-bipyridine) ruthenium (II) ion. In addition, the selectivity coefficient for methyl viologen/sodium at the microemulsion surface was determined by the same photophysical technique. The value for copper (II)/sodium exchange (K(Cu/Na)) is 1.1+/-0.3 and that for methyl viologen/sodium (K(MV/Na)) is 0.9+/-0.3. The results show that the pseudo-phase ion exchange model can be used to obtain the selectivity coefficient in a microemulsion system.     

Geminate rebinding in R-state hemoglobin: kinetic and computational evidence for multiple hydrophobic pockets

Biphasic geminate rebinding of CO to myoglobin upon flash photolysis has been associated to ligand distribution in hydrophobic cavities, structurally detected by time-resolved crystallography, xenon occupancy, and molecular simulations. We show that the time course of CO rebinding to human hemoglobin also exhibits a biphasic geminate rebinding when the protein is entrapped in wet nanoporous silica gel. A simple branched kinetic scheme, involving the bound state A, the primary docking site C, and a secondary binding site B was used to calculate the microscopic rates and the time-dependent population of the intermediate species. The activation enthalpies of the associated transitions were determined in the absence and presence of 80% glycerol. Potential hydrophobic docking cavities within the alpha and beta chains of hemoglobin were identified by computational modeling using xenon as a probe. A hydrophobic pocket on the distal side of the heme, corresponding to Xe4 in Mb, and a nearby site that does not have a correspondence in Mb were detected. Neither potential xenon sites on the proximal side nor a migration channel from the distal to proximal site was located. The small enthalpic barriers between states B and C are in very good agreement with the location of the xenon sites on the distal side. Furthermore, the connection between the two xenon sites is relatively open, explaining why the decreased mobility of the protein with viscosity only slightly perturbs the energetics of ligand migration between the two sites.     

Rapid determination of minority organic acids in honey by high-performance liquid chromatography

A rapid high-performance liquid chromatographic method for the determination of organic acids in honey is reported. Malic, maleic, citric, succinic and fumaric acids were identified and quantified in 15 min. First time repeatibility, reproducibility and recoveries were determined out for these acids in honey samples. Maleic acid was also quantified for first time by a chromatographic method. The organic acids were removed from honey by using a solid-phase extraction procedure with anion-exchange cartridges. Previously, the solution of honey was adjusted to pH 10.50 with 0.1 M NaOH and stirred for 15 min at room temperature. Then, this solution was adjusted to pH 5.00 with 0.1 M H2SO4. This procedure was carried out to avoid interferences in the baseline. The chromatographic separation was achieved with only one Spherisorb ODS-2 S5 column thermostated at 25 degrees C. Metaphosphoric acid (pH 2.20) was used as mobile phase at a flow-rate of 0.7 ml/min. Organic acids were detected with a UV-vis detector (215 nm). The precision results showed that the relative standard deviations of the repeatability and reproducibility were < or =3.20% and < or =4.86%, respectively. The recoveries of the organic acids ranged from 62.9 to 99.4%. Under optimum conditions the detection limits ranged from 0.0064 to 7.57 mg/kg and the quantification limits ranged from 0.025 to 10.93 mg/kg.     

Ferromagnetism and chirality in two-dimensional cyanide-bridged bimetallic compounds

The combination of hexacyanoferrate(III) anions, [Fe(CN)(6)](3)(-), with nickel(II) complexes derived from the chiral ligand trans-cyclohexane-1,2-diamine (trans-chxn) affords the enantiopure layered compounds [Ni(trans-(1S,2S)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (1) and [Ni(trans-(1R,2R)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (2). These chiral systems behave as ferromagnets (T(c) = 13.8 K) with a relatively high coercive field (H(c) = 0.17 T) at 2 K. They also exhibit an unusual magnetic behavior at low temperatures that has been attributed to the dynamics of the magnetic domains in the ordered phase.     

Fourier Transform Infrared Spectroscopy and Solid Phase Extraction Applied to the Determination of Oil and Grease in Water Matrices

 The solid phase extraction as a solvent-free method for the analysis of oil and grease in waters was studied. The use of a PTFE surface as a solid phase allows the retention of the volatile fraction of oil and grease, and further analysis of carbon–hydrogen bonds using infrared spectroscopy can be done on the surface. Various oils and grease samples were tested: n-hexadecane, n-tetradecane, n-nonadecane, n-docosane, isooctane, diesel oil and gasoline. Temperatures from 25° to 90 °C and a range of heating times were checked for extraction. Precision tests showed relative standard deviation values of around 10% in several samples of the same concentration. Calibration lines of n-hexadecane showed high correlation coefficients from 0.9 to 30 mg/l. Recoveries for the various oils using different calibration lines showed values from 90 to 110%. The method described here is fast and clean, and allows reproducible measurements of oil and grease in water that do not require the use of a solvent. Received March 1, 2001; accepted August 15, 2001; published online July 15, 2002     

Poly(2-hydroxyethyl acrylate) hydrogel confined in a hydrophobous porous matrix

A series of interpenetrated polymer networks (IPNs) in which the first component is a porous poly(ethyl methacrylate) (PEMA) hydrophobic network and the second one is a poly(2-hydroxyethyl acrylate) (PHEA) hydrophilic network were synthesized. Equilibrium sorption isotherms can be reduced to a single master curve for all the IPNs when the water absorbed is expressed per gram of PHEA in them. The equilibrium water sorption in immersion is always much smaller than that of pure PHEA. This feature is due to the confining effect of the stiff PEMA matrix. The plasticizing effect of the absorbed water on the PHEA phase was characterized using thermally stimulated depolarization currents, dynamic-mechanical analysis and dielectric relaxation spectroscopy. The results show that the shift of the main relaxation peak towards lower temperatures is unaffected by the presence of the PEMA matrix, and only depends on the water content per gram of PHEA in the IPN.     

Shear-induced particle segregation in binary mixtures:Verification of a percolation theory

Granular materials composed of different-sized grains may experience undesired segregation.Segrega-tion is detrimental for a lot of industries because it leads ...