Cu/TiO2-NiO上光促表面催化CO2和H2O合成CH3OH反应规律

采用溶胶-凝胶法制备了n(电子型)-p(空穴型) 复合半导体材料0.5％Cu/TiO2-2.0％NiO (w),利用X射线衍射(XRD)、透射电镜(TEM)、红外光谱(IR)、紫外-可见光漫反射(UV-Vis)、程序升温脱附(TPD)技术对材料结构、吸光性能、化学吸附性能进行了表征,研究了该材料对CO2和H2O合成CH3OH的光促表面催化反应(PSSR)规律.结果表明,所制备材料能够明显促进目的反应,室温条件下即有CH3OH生成.在200 ℃下,由于光-表面-热的协同效应,CO2转化率得以提高,且CH3OH的选择性达到87.5％ .根据实验结果,得出CO2在材料表面的卧式吸附态为CH3OH的前驱物,并对PSSR机理进行了讨论.     

A Novel Dimeric Coumarin from Clausena lenis

A novel dimeric coumarin (1), a dimeric of seselin named diseselin A, was isolated from the aerial part of Clausena lenis. The structure was elucidated based on the MS, 1D and 2D NMR data.     

CO(υ)高振动激发态向C2H2的振动传能研究

用时间分辨富里叶红外发射谱研究了高振动激发态ＣＯ向Ｃ２Ｈ２的传能，得到了ＣＯ（ｖ＝１－３）各振动态布居及其随时间的变化。利用微分法解出弛豫微分方程组，获得ＣＯ（ｖ＝１－３）向Ｃ２Ｈ２的传能速率常数分别为：２．０±０．１，６．０±０．２和９．４±０．８（１０＾－１３ｃｍ＾３·ｍｏｌｅｃｕｌｅ＾－１·ｓ＾－１）。传能速率随着振动量子数的增加而迅速增加。ＣＯ的振动能应向Ｃ２Ｈ２的对称伸缩模ｖ２近共振Ｖ－     

聚丙烯与SBS嵌段共聚物共混时的结晶行为

用偏光显微镜,小角光散射,动态力学测量和DSC等方法研究了聚丙烯和SBS共混物的结晶行为。结果表明,SBS的混入可以降低聚丙烯的结晶程度和阻碍球晶的形成,因而有利于提高聚丙烯塑料的抗冲击性能。从DSC实验也看到共混物中的聚丙烯具有较高的结晶速率。     

Laser ablation in analytical chemistry-a review

Laser ablation is becoming a dominant technology for direct solid sampling in analytical chemistry. Laser ablation refers to the process in which an intense burst of energy delivered by a short laser pulse is used to sample (remove a portion of) a material. The advantages of laser ablation chemical analysis include direct characterization of solids, no chemical procedures for dissolution, reduced risk of contamination or sample loss, analysis of very small samples not separable for solution analysis, and determination of spatial distributions of elemental composition. This review describes recent research to understand and utilize laser ablation for direct solid sampling, with emphasis on sample introduction to an inductively coupled plasma (ICP). Current research related to contemporary experimental systems, calibration and optimization, and fractionation is discussed, with a summary of applications in several areas.     

Asymmetric total syntheses of (+)-mycoepoxydiene and related natural product (-)-1893A: application of one-pot ring-opening/cross/ring-closing metathesis to construct their 9-oxabicyclo[4.2.1]nona-2,4-diene skeleton

The total syntheses of (+)-mycoepoxydiene and (-)-1893A have been completed. The present synthetic strategy features the use of one-pot ring-opening/cross metathesis (ROM/CM) followed by a ring-closing metathesis (RCM) reaction, allowing for the concise construction of the 9-oxabicyclo[4.2.1]nona-2,4-diene framework from a 7-oxabicyclo[2.2.1]hept-2-ene derivative and 1,3-butadiene. The sequential metathesis product was converted into (+)-mycoepoxydiene through the oxidative rearrangement of a furfuryl alcohol to a pyranone, thereby establishing its absolute stereochemistry. From the common intermediate, a structurally related natural product (-)-1893A was also synthesized via the vinylogous aldol reaction.     

Molecular films of water-miscible ionic liquids formed on glassy carbon electrodes: characterization and electrochemical applications

This letter describes the formation and possible electrochemical applications of molecular films of water-miscible imidazolium-based ionic liquids (ILs) on glassy carbon (GC) electrodes. X-ray photoelectron spectroscopy (XPS) and electrochemical results indicate that the water-miscible ILs used in this study can interact with the GC electrode and form molecular films on the electrode surface. The formed molecular films are found to possess striking electrochemical properties such as electrocatalysis toward ascorbic acid (AA) and the capability to facilitate direct electron transfer of horseradish peroxidase (HRP). This demonstration would pave the way for new electrochemical applications of water-miscible ILs and is envisaged to be useful for the investigation of the electrochemical properties of water-miscible ILs in aqueous media provided the same counteranion is used as the supporting electrolyte.     

The effect of B2O3 addition on the crystallization of amorphous TiO2-ZrO2 mixed oxide

The effect of B₂O₃ addition on the crystallization of amorphous TiO₂-ZrO₂ mixed oxide was investigated by X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG/DTA). TiO₂-ZrO₂ mixed oxide was prepared by co-precipitation method with aqueous ammonia as the precipitation reagent. Boric acid was used as a source of boria, and boria contents varied from 2 to 20 wt%. The results indicate that the addition of small amount of boria (<8 wt%) hinders the crystallization of amorphous TiO₂-ZrO₂ into a crystalline ZrTiO₄ compound, while a larger amount of boria (?8 wt%) promotes the crystallization process. FT-IR spectroscopy and ¹¹B MAS NMR results show that tetrahedral borate species predominate at low boria loading, and trigonal borate species increase with increasing boria loading. Thus it is concluded that highly dispersed tetrahedral BO₄ units delay, while a build-up of trigonal BO₃ promote, the crystallization of amorphous TiO₂-ZrO₂ to form ZrTiO₄ crystals.     

An in situ STM study on the long-range surface restructuring of Au(1 1 1) in a non-chloroaluminumated ionic liquid

We report an in situ STM study of a potential-dependent long-range surface restructuring of Au(1 1 1) electrode in neat 1-butyl-3-methylimidazolium tetrafluoroborates (BMIBF₄) ionic liquid. Au(1 1 1) undergoes a significant long-range surface restructuring upon cathodic excursion to −1.0 V vs. Pt quasi-reference. The restructuring involves the formation of tiny pits, which then develops into a stable worm-like network with an average width of the network grids 2 nm. Electrochemical annealing occurs at the cathodic limit with the presence of a reduction product of cation BMI⁺. A smooth surface is recovered with the appearance of the typical (√3 × 22) reconstruction of Au(1 1 1). The surface restructuring is reestablished upon anodic excursion to −1.3 V after the adsorbed reduction product is oxidized. The long-range surface restructuring phenomenon is tentatively explained as a result of partial charge transfer to the weakly adsorbed BMI⁺, which reduces the metal–metal cohesive energy. In addition, the synergetic effect of the counter anion BF₄⁻ may also be involved. The results provide a knowledge of Au(1 1 1) electrode behavior in the neat ionic liquid and are beneficial to understanding in situ STM results involving surface morphological changes in such a media.     

Ferromagnetic anomaly associated with the antiferromagnetic transitions in (donor)[Ni(mnt)2]-type charge-transfer salts

Three newly prepared [Ni(mnt)2] complexes, (HMTTF)[Ni(mnt)2], (ChSTF)[Ni(mnt)2], and (DBTTF)2[Ni(mnt)2], are reported (DBTTF = dibenzotetrathiafulvalene, ChSTF = 2,3-cyclohexylenedithio-1,4-dithia-5,8-diselanafulvalene, HMTTF = bis(trimethylene)-tetrathiafulvalene, and mnt = maleonitrile dithiolate). The former two compounds have usual DA-type (D = donor, A = acceptor) mixed stacks, whereas the DBTTF complex has DDDDAA-type 6-fold columns. These compounds are electrical insulators, but the HMTTF and ChSTF complexes exhibit chiT minima at 16 and 55 K, respectively, followed by chiT peaks at 8 and 16 K. Below these temperatures the ESR signal disappears, indicating antiferromagnetic transitions. The origin of the ferromagnetic interaction is explained either from the difference of the g values between the donor and the anion or from the intrinsic ferromagnetic interaction of the [Ni(mnt)2] anions.