Atomic Force Microscopy,Transmission Electron Microscopy,and Photon Correlation Spectroscopy: Three Techniques for Rapid Characterization of Optimized Self-Nanoemulsiying Drug Delivery System of Glibenclamide,Carvedilol, and Lovastatin

This article looks at atomic force microscopy as an important aid to characterize the self-nanoemulsifying formulation of glibenclamide, lovastatin, and carvedilol in conjunction with other sophisticated technique, viz., transmission electron microscopy and photon correlation spectroscopy. Sizes obtained by processing the atomic force microscopy (AFM) image are comparable with those obtained from transmission electron microscope. Although in the present study, the mean particle size obtained from photon correlation spectroscopy does not correlate to the findings of atomic force microscopy and transmission electron microscopy, but the poly-disperse index values correlate well with the findings of AFM and transmission electron microscopy where uniform particle size was observed in aqueous dispersion of self-nanoemulsifying formulation of glibenclamide, lovastatin, and carvedilol.     

Structural Transitions of Self-Nanoemulsifying Drug Delivery System of Glibenclamide,Carvedilol, and Lovastatin upon Progressive Aqueous Dilution

The dynamics of morphological transition in amphiphillic systems such as self-nanoemulsifying drug delivery system (SNEDDS) has become an increasingly active field of research in colloidal science. The present contribution deals with the morphological transition of selected optimized SNEDDS formulations of glibenclamide, carvedilol, and lovastatin on progressive aqueous dilution using transmission electron microscopy. The study emphasizes the structural aspects of the systems and stresses the effect of aqueous dilution under which the systems transform from water-in-oil (L₂) phase into bicontinuous structure and, finally, in oil-in-water (L₁) nanodroplets.     

Nucleophilic Substitution on 5-Nitrobenzofurazan-3-Oxide: A New Synthetic Route for Novel Benzofurazan-5, 5′-Oxybis 3, 3′-Dioxide and Benzofurazan-5, 5′-Thiobis-3, 3′-Dioxide

The nucleophilic substitution of the nitro group in 5-nitrobenzofurazan-3-oxide is studied undder soild-liquid phase-transfer catalysis (PTC) conditions.     

Accurate measurement of uranium isotope ratios in soil samples using thermal ionization mass spectrometry equipped with a warp energy filter

A chemical and mass-spectrometric procedure for uranium isotopic analysis using a thermal ionisation mass spectrometer equipped with a Wide Aperture Retardation Potential energy filter has been developed and applied to uranium isotopic measurements for various soil samples. Soil samples were digested using a microwave digestor. Uranium was isolated from soil samples by the chemical separation procedure based on the use of anion-exchange resin and UTEVA extraction chromatography column. The isotope ratios were measured for two certified reference materials by using a VG Sector 54-30 thermal ionisation mass spectrometer in dynamic mode with Faraday cup and Daly ion counting system. Replicates of standard reference materials showed excellent analytical agreement with established values supporting the reliability and accuracy of the method. Precision of the ²³⁵U/²³⁸U ratio was achieved by a correction factor of 0.22% amu as a function of ion-beam intensity with sample loads of around 250?ng of U. The resulting reproducibility for standards and soil samples was better than 0.2% at two standard deviations (SD). Uranium isotopic compositions have been determined in several reference soil samples such as Buffalo river sediment, NIST 2704, river sediment SRM 4350b and ocean sediment NIST-4357 and a Chernobyl soil sample. There was a significant deviation from the natural uranium in comparison with Chernobyl soil samples.     

Inductive effect for the phase stability in hydrogen bonded liquid crystals,x-(p/m)BA:9OBAs

A new series of hydrogen bonded liquid crystal (HBLC) complexes, made up with substituted benzoic acids (BAs) and nonyloxy benzoic acid, viz., x-(p/m)BA:9OBAs are reported for x = F, Cl, Br and –CH₃ substituted at para (p) or meta (m) positions of BA moiety. Proton nuclear magnetic resonance (¹H-NMR) spectrum confirms the HBLC complex. Infra red (IR) spectrum confirms linear, double and complementary type of hydrogen bonding (HB) between x-(p/m)BAs and 9OBA. The liquid crystal (LC) phases are characterised by polarisation optical microscopy (POM) and differential scanning calorimetry (DSC) techniques. x-(p/m)BA:9OBA exhibit N, C and G LC phase variance. HB induces tilted phases and enhances LC phase stability. The influence of configuration, size, electronegativity, electron directing capacity and inductive nature of substituent (x) is investigated for the stability of LC phases. An overview of the LC phase data indicates predominant ‘negative inductive effect’ in HBLCs with electron withdrawing substituents. Inductive effect operates effectively for para substitutions. Results are discussed in the wake of reports in other HBLCs.     

Investigation on ion movement in the fringe-field switching mode depending on resistivity of alignment layer and dielectric anisotropic sign of liquid crystal

Adsorption and desorption of ions at interface between liquid crystal and alignment layer in liquid crystal displays play a crucial role in residual direct current voltage associated with image sticking. In this article, the dependency of such adsorption and desorption of ions on resistivity of alignment layer and sign of liquid crystal dielectric anisotropy in the fringe-field liquid crystal cell has been investigated. Our studies show that the time constant of ions during adsorption and desorption depends upon resistivity and dielectric constant of liquid crystal and alignment layer, and most strongly influenced by the resistivity of alignment layer such that the one with lower resistivity in two orders shows much faster adsorption and desorption at the interface than that of the one with higher resistivity.     

Novel stereoselective control over cis vs trans opening of benzo[c]phenanthrene 3,4-diol 1,2-epoxides by the exocyclic N(2)-amino group of deoxyguanosine in the presence of hexafluoropropan-2-ol

We describe a novel and efficient synthesis (62-84% yields) of the eight possible, diastereomerically pure, cis and trans, R and S O(6)-allyl-protected N(2)-dGuo phosphoramidite building blocks derived through cis and trans opening of (+/-)-3alpha,4beta-dihydroxy-1beta,2beta-epoxy-1,2,3,4-tetrahydrobenzo[c]phenanthrene [BcPh DE-1 (1)] and (+/-)-3alpha,4beta-dihydroxy-1alpha,2alpha-epoxy-1,2,3,4-tetrahydrobenzo[c]phenanthrene [BcPh DE-2 (2)] by hexafluoropropan-2-ol (HFP)-mediated addition of O(6)-allyl-3',5'-di-O-(tert-butyldimethylsilyl)-2'-deoxyguanosine (3) at C-1 of the epoxides. Simply changing the relative amount of HFP used in the reaction mixture can achieve a wide ratio of cis/trans addition products. Thus, the observed cis/trans adduct ratio for the reaction of DE-1 (1) in the presence of 5 equiv of 3 varied from 17/83 to 91/9 over the range of 5-532 equiv of HFP. The corresponding ratios for DE-2 (2) varied from 2/98 to 61/39 under the same set of conditions. When 1 or 2 was fused with a 20-fold excess of 3 at 140 degrees C in the absence of solvent HFP, almost exclusive trans addition (>95%) was observed for the both DEs. Through the use of varying amounts of HFP in the reaction mixture as described above, each of the eight possible phosphoramidite oligonucleotide building blocks (DE-1/DE-2, cis/trans, R/S) of the BcPh DE N(2)-dGuo adducts can be prepared in an efficient fashion. To rationalize the varying cis-to-trans ratio, we propose that the addition of 3 to 1 or 2 in the absence of solvent or in the presence of small amounts of HFP proceeds primarily via an S(N)2 mechanism to produce mainly trans-opened adducts. In contrast, increasing amounts of HFP promote increased participation of an S(N)1 mechanism involving a relatively stable carbocation with two possible conformations. One of these conformations reacts with 3 to give mostly trans adduct, while the other conformation reacts with 3 to give mostly cis adduct.     

Conductimetric immunosensor based on poly(3,4-ethylenedioxythiophene)

A conductimetric reagentless immunosensor using the biospecific binding pair of goat antirabbit IgG and rabbit IgG has been designed and fabricated using poly (3,4-ethylenedioxythiophene) as the immobilization matrix-cumtransducer.     

High throughput synthesis of ester library utilizing selective molecular reactivity and recognition technology

This paper reports a new solid support reagent that showed high degrees of selective molecular reactivity and molecular recognition in homo-functional reactions (reactions having similar reactive functionality in reactants and products).     

Crystal engineering of metalloporphyrin assemblies. New supramolecular architectures mediated by bipyridyl ligands

Targeted synthesis of new supramolecular motifs of metalloporphyrins in crystals by a concerted mechanism of molecular recognition in three dimensions, aided by organic ligands, is presented; it involves induced assembly of [tetrakis(4-hydroxyphenyl)porphyrinato]zinc species by a combination of axial coordination through bridging bipyridyls and of lateral hydrogen bonding.