Photoinduced omega-bond dissociation of m-halomethylbenzophenones studied by laser photolysis techniques and DFT calculations. Substituted position effects

Photochemical profiles of omega-cleavage of carbon-X (X = Br and Cl) bonds in m-bromo- and m-chloromethylbenzophenones (m-BMBP and m-CMBP) were investigated by laser photolysis techniques and DFT calculations. m-BMBP and m-CMBP were found to undergo omega-bond cleavage to yield the m-benzoylbenzyl radical (m-BBR) at 295 K, and the quantum yields were determined. No CIDEP signal was detected upon 308 nm laser photolysis of both the compounds. From these observations, it was inferred that the omega-bond of these m-halomethylbenzophenones (m-HMBP) cleaves in the lowest excited singlet state (S(1)(n,pi(*))) upon direct excitation. Upon triplet sensitization of acetone (Ac), the m-BBR formation was observed in transient absorption for an Ac-m-BMBP system, and an efficiency of the C-Br bond cleavage in the lowest triplet state (T(1)(n,pi(*))) of m-BMBP was determined. In contrast, formation of triplet m-CMBP was seen for an Ac-m-CMBP system. Absence of C-Cl bond cleavage in the triplet state of m-CMBP indicated the reactive state of m-CMBP for omega-cleavage is only the S(1)(n,pi(*)) state. Based on the efficiencies and DFT calculations for excited state energies, photoinduced omega-bond dissociation of m- and p-HMBPs was characterized.     

QUATERNARY STRUCTURE OF PEA PHYTOCHROME I DIMER STUDIED WITH SMALL-ANGLE X-RAY SCATTERING and ROTARY-SHADOWING ELECTRON MICROSCOPY

Abstract— The quaternary structure of pea phytochrome type I (PI) dimer in the red-light-absorbing form was studied by small-angle X-ray scattering (SAXS) technique and rotary-shadowing electron microscopy. Structural parameters for PI 114 kDa chromopeptide dimer and its tryptically digested N-terminal 59 kDa chromopeptide monomer, such as average electron density, molecular volume and the second moment of electron density distribution, were determined in terms of SAXS using the contrast variation method. Furthermore, by means of model simulation for the scattering profiles of the chromopeptides, most plausible structural models for both peptides were constructed. The distance between the chromophoric domains was estimated to be about 70 A in the resultant model for 114 kDa chromopeptide dimer. Furthermore, the model was consistent with the electron-micrographic images of both the intact PI dimer and the PI 114 kDa chromopeptide dimer, so that the N-terminal 7 kDa fragment did not significantly contribute the low-resolution images of the dimer.     

Structure changes on polymer blends by means of phase growth on microheterophase surface

We have studied the structural changes on poly(2-hydroxyethyl methacrylate) (PHEMA)/polystyrene (PS) blends by means of phase growth of microheterophase pattern on a template surface composed of poly[2-hydroxyethyl methacrylate (HEMA)-g-styrene (S)] graft copolymer (lamellar shape). The PS macromonomer was synthesized by free radical polymerization of S monomer initiated by a functional initiator [2,2'-azobis(2-(2-imidazolin-2-yl)propane: VA-061] in the presence of a degradative chain transfer agent, followed by an end-capping reaction with p-chloromethylstyrene (CMS). Poly(HEMA-g-S) graft copolymers were prepared by free radical copolymerization of these vinylbenzyl-terminated PS macromonomers with HEMA comonomer.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Photoresponsive porphyrin-imprinted polymers prepared using a novel functional monomer having diaminopyridine and azobenzene moieties

A novel photoresponsive functional monomer bearing diaminopyridine and azobenzene moieties was synthesized and applied to the preparation of photo-regulated molecularly imprinted polymers, which can recognize porphyrin derivatives through hydrogen bonding. The binding affinity of the imprinted cavities was regulated by UV irradiation, suggesting that azobenzene groups located inside the binding sites worked as photosensitizers and the trans-cis isomerization could regulate the affinity for the target compounds. Repetitive binding of the target compound to trans-IP and cis-IP was directly monitored by slab optical waveguide spectroscopy and the photo-mediated regulation of binding affinity was successfully confirmed.     

Solution properties of perfluorinated anionic surfactants with divalent counterion of separate electric charges

Novel surfactants of perfluorinated double long-chain salts with divalent counterion of separate electric charge, 1,1-(1,omega-alkanediyl)bispyridinium diperfluorononanoate (CnBP(FC9)2, n = 2, 4, 6, 8) were newly synthesized. Their solution properties were investigated by surface tension measurement over the temperature range from 298.2 to 313.2 K, where magnesium diperfluorononanoate (Mg(FC9)2) was employed as a reference surfactant with divalent counterion of concentrated electric charge. From change of surface tension with concentration, the critical micelle concentration (CMC), surface excess (Gamma), apparent molecular surface area (A), and -log(concentration to reduce surface tension of water by 20 mN m-1) (pC20) were determined. The CMC values of CnBP(FC9)2 decreased with increasing charge separation and with increasing temperature, where the values of CnBP(FC9)2 were much smaller than those of Mg(FC9)2. In addition, the pC20 values of the former were also much larger than those of the latter. These results indicate a strong influence of the extent of charge separation or the spacer length of the counterions upon surface activity of the fluorinated surfactants. The surface excess or the corresponding apparent molecular surface area monotonously changed with the spacer length (n < or = 6), whereas the behavior for n = 8 was much different from the other CnBP(FC9)2 due to conformational change in the in-between alkanediyl chain. The entropy changes (Deltas) for the surface adsorption or condensation were found to be mostly negative for CnBP(FC9)2, where the changes approached zero with an increase in the charge separation. On the other hand, the changes for Mg(FC9)2 were positive over the whole concentration below the CMC. In addition, Brewster angle microscopy indicated no condensation of the present surfactants just at the air/solution interface.     

Monitoring of 8-oxo-7,8-dihydro-2'-deoxyguanosine in urine by high-performance liquid chromatography after pre-column derivatization with glyoxal reagents

A new, simple and sensitive pre-column fluorescence derivatization high-performance liquid chromatographic method for the determination of the oxidative DNA stress marker, 8-oxo-7,8-dihydro-2'-deoxyguanosine, was developed. Solid-phase extraction using an Oasis HLB cartridge avoided troublesome sample preparation steps, interference from charged species and frequent and essential electrode maintenance in electrochemical procedures. 8-Oxo-7,8-dihydro-2'-deoxyguanosine and other guanine compounds were selectively derivatized with glyoxal reagents (phenylglyoxal, 3,4-methylenedioxyglyoxal, 2-naphtylglyoxal and 6-methoxynaphthylglyoxal) at 40-60 degrees C. Derivatization with 6-methoxynaphthylglyoxal at 40 degrees C for 30 min gave the strongest fluorescence product. The fluorescence derivatives from reaction with 6-methoxynaphthylglyoxal were separated on a Capcell Pak C18 SG 120A column (4.6 mm i.d. x 150 mm, 5 microm) with acetonitrile-5 mM phosphate buffer (pH 6.0; 3:7, v/v) as mobile phase. The detection wavelength of the fluorescence derivative of 8-oxo-7,8-dihydro-2'-deoxyguanosine was lambda(ex) 400 nm and lambda(em) 510 nm. The detection limit of 8-oxo-7,8-dihydro-2'-deoxyguanosine was 1 ng/mL using 50 mL of urine. The calibration graphs were linear up to 30 microg/mL for 8-oxo-7,8-dihydro-2'-deoxyguanosine. The relative standard deviation of 20 ng/mL of 8-oxo-7,8-dihydro-2'-deoxyguanosine was 7.0%. The proposed method was compared with the enzymatic ELISA 8-oxo-7,8-dihydro-2'-deoxyguanosine analysis method (8-OH-dG Check, JaICA, Shizuoka, Japan). The correlation coefficient was 0.79 (n = 20) and y = 0.85x + 5.34. The proposed method was applied to the monitoring of 8-oxo-7,8-dihydro-2'-deoxyguanosine in urine from male heavy smokers.     

Time-resolved infrared spectroscopy of K3Ta3B2O12 photocatalysts for water splitting

Electrons photoexcited in K(3)Ta(3)B(2)O(12), an efficient photocatalyst for the water-splitting reaction driven by ultraviolet light, were observed using time-resolved IR absorption spectroscopy with microsecond resolution. When the catalyst was irradiated with 266 nm light pulses, a structureless absorption appeared at 3000-1500 cm(-1). The absorption was assigned to the optical transition of electrons that were band gap-excited and then trapped in mid-gap states. The absorbance decayed with a time delay because of the electron-hole recombination. The rate of recombination in an argon atmosphere was sensitive to the composition of the starting material used in the catalyst preparation. The electron decay was accelerated by exposing the catalyst to water vapor. The degree of acceleration was qualitatively correlated with the H(2) production rate observed during steady-state light irradiation.     

Second hyperpolarizabilities (gamma) of bisimidazole and bistriazole benzenes: diradical character, charged state, and spin state dependences

The second hyperpolarizabilities of bisimidazole- and bistriazole-benzene compounds have been calculated at different levels of approximation to unravel the effects of diradical character as well as of charge and spin multiplicity. The largest second hyperpolarizabilities are associated with intermediate diradical character, provided positive charging does not compensate for this effect. For the neutral diradical bisimidazole compound, the singlet diradical species possesses a second hyperpolarizability two to three times larger than the corresponding triplet, demonstrating the possibility of spin state control of the third-order NLO responses for diradical species.