炭黑负载Pt-Sn双金属催化剂对乙醇的电催化氧化性能

采用一步还原法(乙二醇为还原剂)与两步还原法(在聚乙烯吡咯烷酮PVP保护下,先用硼氢化钠还原制备Sn溶胶,沉积Pt后用乙二醇还原)制备了炭黑负载Pt-Sn双金属催化剂,利用循环伏安法和计时电流法考察了催化剂制备方法、Pt/Sn原子比、溶液p H值、PVP/Sn质量比、反应介质等对乙醇室温电催化氧化活性和稳定性的影响.以X光衍射、透射电镜及电化学活性面积测定对所得催化剂进行了表征.发现引入Sn明显提高了Pt催化剂对乙醇的电催化活性与稳定性,两步还原法得到的Pt3Sn/C催化剂具有更小的颗粒尺寸,更大的电化学活性面积及更高的乙醇氧化活性与稳定性.与酸性介质相比,该催化剂在碱性介质中的电化学活性更好.     

橡胶在动态载荷下的能量损耗分析

以交联密度不同的同类轮胎胎面胶A1和A2为研究对象,通过动态拉伸实验得到储能模量及损耗模量随频率变化的曲线.建立了黏弹性广义Maxwell模型来定量分析不同温度的橡胶在不同频率的动态载荷下的能量损耗.采用非线性规划的方法分别在低频(10~25 Hz)及高频(25~60 Hz)下拟合模量-频率曲线,得到黏弹性广义Maxwell模型的参数值.采用有限元软件Abaqus模拟胎面胶动态拉伸过程并计算胎面胶的损耗角正切,得到不同温度下胎面胶的损耗角正切随激振频率的变化规律,通过和实验结果的比较证明文中所述黏弹性广义Maxwell模型及其参数获取方法可准确应用于胎面胶的动态拉伸性能分析.预测了在不同温度及频率下每一循环载荷周期中胎面胶的应力-应变迟滞回线以及单位体积胶料的能量损耗,阐释了不同温度下的胎面胶的能量损耗随频率的变化规律,同时结合2种胎面胶的交联密度测试数据分析了胶料的构效关系.     

完整Coriolis力作用下带有外源强迫的非线性KdV方程

利用摄动方法,从描写既有Coriolis力垂直分量又含有水平分量的位涡方程出发,给出了近赤道非线性Rossby波所满足的具有外源强迫的非线性KdV方程,并利用Jacobi椭圆函数展开法,求解了改进后的非线性KdV方程的行波解及孤立波解.通过分析KdV方程的行波解,指出Coriolis力的水平分量和外源对Rossby波动的影响.     

A novel cross-H-channel interface for flow injection-capillary electrophoresis to reduce sample requirement and improve sensitivity

In this study, a cross-H-channel interface was constructed for coupling flow injection with capillary electrophoresis (FI-CE) to reduce sample requirement and sensitivity loss in the typical FI-CE. Based on this cross-H-channel interface, a new FI-CE system was established, in which sample introduction was performed by directly injecting sample solution along a thin capillary (50 μm, i.d.) to the interface from an injection syringe. The sample requirement was reduced distinctly and usual sample dilution in the sample transport process was obviously decreased, thereby spontaneously enhancing the sensitivity. Moreover, because of the unique construction of the cross-H-channel interface, field amplified sample stacking (FASS) and high-speed CE were skillfully combined to further improve the sensitivity and to shorten separation time. The versatility of this new FI-CE was demonstrated by determination of ephedrine (E) and pseudoephedrine (PE) in human urine. Up to 45 repeated injections per hour and clearly baseline separation of E and PE in less than 1 min were achieved, giving limits of detection (LODs) of 0.23 and 0.21 μg mL(-1) for E and PE, respectively, and yielding relative standard deviation (RSD) values of the migration time and the peak height (n=5) of 2.6% and 3.1% for E, 2.3% and 3.3% for PE, respectively. In contrast to typical FI-CE, approximately 8-250-fold decreases in sample volume requirement, 7-fold shortening in separation time and 50-fold improvements in sensitivity were obtained.     

介电高弹聚合物理论

软材料受刺激会发生变形, 该变形会引起相应的功能, 这种材料称为活性软材料(soft active material, SAM). 本综述主要讨论介电高弹聚合物这一类活性软材料. 当介电高弹聚合物薄膜受到厚度方向的电压作用时, 薄膜厚度减小同时面积增大, 可导致超过100{\%}的应变. 介电高弹聚合物作为转换器被广泛应用, 包括柔性机器人、智能光学器件、盲文显示屏、发电机等. 本文综述了建立在连续介质力学和热力学框架内的、并且基于分子理论描述和经验观测的介电高弹聚合物理论. 该理论耦合了大变形和电势, 描述了非线性和非平衡行为, 如力电失稳和黏弹性. 采用该理论能够通过有限元方法模拟实际构型的转换器, 计算力电能量转换的效率, 给出电致大变形的可行途径. 该理论有助于材料和器件设计.     

基于语言评价信息的知识资本要素识别方法

知识资本是组织创造价值和获取竞争优势的关键资源, 其要素通常具有复杂的关联性, 如何识别知识资本的核心要素、原因要素和结果要素,对于组织进行知识资本管理具有重要意义.本文在构建了知识资本要素识别体系的基础上,借鉴决策试验和评价实验室报告的思想提出了一种基于语言评价信息的知识资本要素识别方法,通过处理和集结专家针对知识资本要素关联给出的语言评价信息,对知识资本要素进行排序与归类.最后通过一个实例分析说明了该方法的应用, 并说明了如何根据识别结果制定相应的策略以便进行知识资本的投资和控制.     

The biological characteristics of different generation mesenchymal stem cells cultured in vitro and cocultured with vascular scaffold

Mesenchymal stem cells (MSCs) were used widely as seed cells in tissue engineering blood vessel construction. However, the biological characteristics difference of different generation MSCs in vitro culture is unknown, which laid a foundation for appropriate generation seeded cells selection for tissue engineering blood vessel construction. In this report, MSCs were isolated from SD rat bone marrow and identified by flow cytometry; cell growth curve test, cell surface antigen expression rate detection, cryopreservation resuscitation rate test, CD31 expression rate test, cell cycle analysis, and adhesion difference on vascular scaffold test were performed. The research results indicated that the MSCs shape was spindle and uniform with vigorous growth. CD105 and CD90 factor expression rate reached 82.5 and 84.9%, respectively, and the expression rate of CD45 was only 7.3%. The proliferation capacity of the fourth generation MSCs were more exuberant, with proliferation index as 20.3%; the cell proliferation index of the eighth generation decreased to only 9.1%. The cryopreservation resuscitation rate of the second generation and fourth generation MSCs were both higher than 80%, and the cryopreservation resuscitation rate of the eighth generation MSCs was only about 60%. After the induction for 5 days, MSCs had weak CD31 expression, and with the prolonged induction time, expression increased. All generation MSCs expressed CD31 after being induced for 10 days; however, the CD31 positive expression rate of the second generation, fourth generation, and sixth generation MSCs had significant difference with the eighth generation MSCs. Adhesion rate of MSCs before sixth generation was around 40%, but the adhesion rate of eighth generation MSCs was only about 27%. In all, biological characteristics of different generation MSCs existed certain differences, and especially the eighth generation MSCs aged seriously, whose cell activity decreased significantly. The researchers believed that the MSCs before the sixth generation can maintain excellent properties of MSCs, and can be used as seed cells for vascular tissue engineering.     

喷雾沉积热分解法在SrTiO3和织构的Ag基底上制备YBa2Cu3O7-x涂层超导膜

本文研究了用喷雾沉积热分解法在(110)Ag单晶、{110}<011>Ag带、(100)SrTiO3三种不同的基底上制备YBa2Cu3O7-x涂层超导薄膜.通过对溶液成份,载气流量,沉积温度,退火时间等条件的系统研究,我们发现上述参数与薄膜的成份,表面形貌,织构以及超导性能有密切的关系.在Ag单晶基底上所获的YBCO薄膜具有很强的平面双轴织构,起始转变温度达到了90K,Jc值超过了104A/cm2(77K,0T);改进试验装置后,以织构Ag为基底,制备出了15cm长的YBCO超导带材,Jc值达到了104A/cm2(77K,0T).同时,我们发现温度梯度在热分解区间内对薄膜的形成起到了重要的作用.随后我们又在喷雾加热系统中附加一个金属加热圆筒,以改善加热区间的温度梯度,薄膜的性能得到了明显的提高.在(100)SrTiO3上的YBa2Cu3O7-x薄膜,(102)极图的FWHM值达到了0.70°,薄膜的起始超导转变温度为91K(ΔTc=1.5K),Jc值接近105A/cm2.     

广义测不准关系与Reissner Nordstrom de Sitter黑洞熵

针对Reissner Nordstrom de Sitter时空背景，利用经广义测不准关系改进的薄层brick wall方法计算了黑洞熵。结果表明，由这种方法得到的黑洞熵上限与它的外视界和宇宙视界面积之和成正比，和人们预期的结果相符。从中揭示了黑洞 熵与视界面积之间的内在联系，也进一步表明了黑洞熵是视界面上量子态的熵，是一种量子效应。由广义测不准关系的引入看到，brick wall方法与引力场量子化可能存在着一些内在的联系。     

基于完备BR0-代数的全蕴涵三Ⅰ算法

研究了基础BR0-代数的性质和基于完备基础BR0-代数的全蕴涵三Ⅰ算法,对一般蕴涵算子给出了三Ⅰ算法解存在的一个充分条件,并将结果应用于R0-单位区间W,不但极大的简化了Ro-单位区间W的R0-型α-三Ⅰ算法结果的证明,而且使其证明过程与相应的模糊命题演算系统结合起来,说明了R0-型三Ⅰ算法是与BL*系统相匹配的模糊推理方法.