Synthesis of polysubstituted 5-hydroxyhydantoins via ring-opening of isatins

A simple and efficient tandem reaction approach was developed for the synthesis of 5-hydroxyhydantoins from one-pot reaction of isatins, phthalic anhydride or succinic anhydride, and 1,3-dimethylurea (1,3-diethylurea). The products were gained through the ring-opening of isatins process. The advantages of this report are simple operation, mild reaction conditions, good yields and easily available raw materials. It was very important for us to obtain the intermediate product and that provided a solid basis for the correct interpretation of the reaction mechanism.     

Patterning of MgO epitaxial films on LaAlO3 substrate using photosensitive sol-gel method

Journal of Sol-Gel Science and Technology - Herein, the chelated precursor solution (Mg/BzAc) was synthesized using magnesium acetate as raw material and benzoylacetone as chemical modifier. The...     

In situ synthesis of CdS/ZnS composite nanoparticles from ZIF-8 for visible light disposal of Cr(VI)

Journal of Sol-Gel Science and Technology - Zeolitic Imidazolate Framework (ZIF-8) micropolyhedra were employed as a raw material for the synthesis of fine cadmium sulfide/zinc sulfide (CdS/ZnS)...     

A Furan-based Phosphaphenanthrene-containing Derivative as a Highly Efficient Flame-retardant Agent for Epoxy Thermosets without Deteriorating Thermomechanical Performances

In order to reduce greenhouse gas emissions, developing flame retardants from bio-based resources has aroused extensive interest in recent years. In this work, we utilized furfural(biomass) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) to synthesize a biobased co-curing agent(FGD) to combine with 4,4'-diaminodiphenyl methane(DDM) for obtaining a low-phosphorus loading flame-retardant epoxy thermosets. The introduction of FGD decreased the activation energy of the curing progress, enhanced the mechanical properties of the epoxy thermosets, and did not affect the glass transition temperature of the epoxy thermosets. EP-5.0 had a lower thermal degradation rate and a doubled char yield compared with EP-0. The phosphorus content of EP-5.0 was only 0.45 wt%, while EP-5.0 reached the UL-94 V-0 rating with a high LOI value of 32%. Compared with EP-0, the PHRR of EP-2.5 and EP-5.0 decreased by 22.3% and 31.3%, respectively. The SEM results showed that the addition of FGD made the char residues more uniform and denser, which could effectively prevent combustible volatiles from escaping from the degradation area to the flame area and isolate the heat transfer so that the epoxy thermosets had an excellent flame-retardant performance.     

DNA molecular configurations in flows near adsorbing and nonadsorbing surfaces

We investigate experimentally -phage and T2-coliphage DNA molecules near both non-adsorbing glass and adsorbing 3-aminopropyltriethoxysilane (APTES)-coated glass surfaces in a simple steady shearing flow generated by a torsional flow cell. The DNA molecular deformations near the surface are found to be considerably weaker than in bulk flow at the same shear rate. This affects the DNA molecules deposition and stretching on the adsorbing surface. Surprisingly, for a simple shearing flow in the torsional shearing device, the observed stretch, for molecules both near (<10 µm) the surface and adsorbed to it, is much less than predicted by simulations.     

The mechanical problems in tumor and tumor microenvironment

肿瘤微环境包括肿瘤细胞、间质细胞、细胞外基质等.其在肿瘤的生长和发展过程中起着关键作用.肿瘤的微环境与正常组织的微环境有着显著的不同.肿瘤中的压应力对微环境有着多方面的影响, 例如, 可调控血管与淋巴管的功能, 造成代谢异常和间质高压, 压缩间隙基质, 增大药物输运的困难, 促进间质细胞变异并诱导肿瘤细胞转移. 因此, 肿瘤中的力学因素引起了广泛关注.本文总结了肿瘤及其微环境力学问题的研究进展, 讨论了肿瘤微环境中应力产生、药物输运、肿瘤转移等问题, 介绍了肿瘤微环境正常化的策略及其对肿瘤治疗的意义.     

Surface-Modified Sb2S3 Nanoparticles and Their Tribological Behaviors in Liquid Paraffin

Sb₂S₃ nanoparticles surface-modified with S-tetradecyl N, N-dihydroxyethyl dithiocarbamate (C₁₄DTC-Sb₂S₃) have been synthesized via extraction of Sb₂S₃ colloidal particles from ethylene glycol into toluene in the presence of C₁₄DTC. The obtained products were characterized by high-resolution transmission electron microscope (HRTEM) and Fourier transformation infrared (FTIR), and their tribological behaviors as an additive in liquid paraffin were investigated using a four-ball tribometer. The results show that C₁₄DTC-Sb₂S₃ nanoparticles can significantly improve the friction reduction, anti-wear, and load-carrying properties of base oils. The preliminary lubrication mechanism was discussed based on the SEM and XPS investigation of the rubbed surfaces.     

Simple and Efficient Synthesis of Belinostat

A novel synthesis of belinostat (1) starting from 3-nitrobenzaldehyde has been developed. The key step in this sequence involves the conversion of (2E)-3-(3-aminophenyl)acrylic acid methyl ester to (2E)-3-(3-chlorosulfonylphenyl)acrylic acid methyl ester via diazotization and sulfonylation.     

Comparative pyrolysis upcycling of polystyrene waste: thermodynamics, kinetics, and product evolution profile

Pyrolysis is one important way to treat polystyrene waste and upcycle it into useful materials. A comparative pyrolysis study of virgin polystyrene (VPS) and two types of commonly used polystyrene products, expanded polystyrene (EPS) and polystyrene container (CPS) was carried out. Various values were found in the thermodynamic study and kinetic study of VPS, EPS, and CPS pyrolysis, suggesting distinct thermal degradation characteristics of these materials. The energy barrier order of the pyrolysis processes was EPS, CPS, VPS, showing activation energy of 230, 219, and 145 kJ mol^?1, respectively. The order of amount of heat absorbed was EPS, CPS, VPS, with enthalpy of 224, 213, and 139 kJ mol^?1, respectively. The reaction favorability order was EPS, CPS, and VPS with Gibbs free energy of 118, 132, and 210 kJ mol^?1, respectively. Thermogravimetric analysis indicated the use of high heating rate would increase the reaction rate and shorten the reaction time. Product evolution profiles showed that VPS and CPS pyrolysis produced mainly aromatics, while EPS pyrolysis produced aromatics at the initial phase of the reaction and aliphatic hydrocarbon at the latter phase. The diverse pyrolysis behaviors of VPS, EPS, and CPS demonstrated that an examination on different polystyrene materials was desired to optimize the pyrolysis conditions and product distribution, and thus benefit the process of valuable materials recovery.     

Fast redox kinetics of a perovskite oxygen carrier measured using micro-fluidized bed thermogravimetric analysis

Redox kinetics of oxygen carrier in chemical looping combustion (CLC) is important for reactor design and its oxidation enthalpy is important in order to establish auto thermal demonstration. Most published redox kinetics of oxygen carrier has been measured by thermogravimetric analysis (TGA) which can include additional diffusion limitations and thus underestimate the overall kinetics. In this study, the redox kinetics of a new perovskite oxygen carrier (CaMn_0.375Ti_0.5Fe_0.125O_3-δ) was measured by a novel micro-fluidized bed thermogravimetric analysis (MFB-TGA) method which can achieve real-time weight measurement of oxygen carrier in a fluidizing state with similar mass and heat transfer characteristics as in a CLC reactor. The experimental data from MFB-TGA were analyzed with a reactor model. The redox kinetics was described by a two-stage model of gas-solid reaction. The effect of temperature, O₂ concentrations and reducing gas type (H₂ and CH₄) on the redox kinetics in MFB-TGA was investigated and compared with other oxygen carriers such as natural manganese ore and ilmenite. It is observed that the oxidation of both manganese ore and ilmenite can be divided into two stages, a fast initial stage followed by a second slower stage, resulting in slower total oxidation rates. A very interesting finding is that there is only the fast initial stage for the oxygen carrier of CaMn_0.375Ti_0.5Fe_0.125O_3-δ, and the full oxidation of CaMn_0.375Ti_0.5Fe_0.125O_3-δ can be finished within ～4 s which is ～7.5 and ～30 times faster than that of manganese ore and ilmenite. The reduction kinetics of CaMn_0.375Ti_0.5Fe_0.125O_3-δ by H₂ is also ～5 and ～2.2 times faster than that of manganese ore and ilmenite, respectively. The kinetic parameters of three oxygen carriers were compared and the redox mechanism of CaMn_0.375Ti_0.5Fe_0.125O_3-δ was discussed.