Spectral hole burning of photosynthetic antenna of blue-green algae

Photosystem II core antenna of blue-green algae Synechococcus isolated in gel was studied by optical hole burning spectroscopy at 4·2 K. Persistent holes were burned into fluorescence spectra throughout the region 680–696 nm. The hole width extrapolated to zero burning fluence yielded a value 1·0±0·2 cm^–1. A theoretical interpretation of the hole profile in fluorescence is presented. The dependence of saturated hole depth on burning wavelength is related to inhomogeneous site distribution function.Authors would like to thank F. Vácha from the Dept. of Biochemistry, Faculty of Nature Sciences, Charles University, for the preparation of the samples.     

医疗和危险废物高温洁净热处理及环境力学

结合2003年中国的突发危害公众健康的事件，分析了医疗、化学战剂及危险废物的分类、特性，比较了各种高温热处理技术的基本要求，方法分类和设备特点，包括：各类焚烧炉、热解炉和等离子体裂解装置．还对前处理工艺要求，尾气处理工艺等进行了分析讨论，讨论了防止二次污染的技术手段，特别介绍了二噁英等高危险性产物的特性．还介绍了发达国家的医疗废物和危险废物的管理、处置和二次污染防治等情况．     

标架形式的简化旋量体系及其对杨振宁方程的应用

本文给出时空流形的一种简化的旋量描述形式。特别是证明了在Newman-Penrose方程中有六个多余的方程。作为对杨振宁引力场方程的应用,求得全部O型和一部分N型“纯粹空间”。     

Hole burning spectroscopy of tetraphenylporphyrins

The persistent spectral hole burning technique has been applied to free base and central metal tetraphenylporphyrins with different substituents. The upper limits of the singlet-singlet homogeneous widths determined from the observed persistent holes have been correlated with the fluorescence lifetimes at low temperatures. Hole burning kinetics and mechanisms of both free base and central metal pigments are discussed.The authors would like to thank dr. V. Král and P. Pancoska for supplying the tetraphenylporphyrins, prof. K. Vacek and I. Pelant for stimulating discussions.     

氨对硅基铁纳米薄膜高温重凝核的影响

采用弧过滤离子沉积系统（arc filtered deposition,AFD）在纯硅表面制备铁纳米薄膜。研究了750℃下铁纳米薄膜在氢气氛围以及氨气氛围中重凝核的规律。研究表明,在氢气氛围中,铁纳米薄膜重凝核以后形成的铁纳米颗粒随薄膜的厚度增加以及保温时间的延长而增大;但在氨气氛围中,铁纳米薄膜重凝核后形成的纳米颗粒的尺寸随保温时间的变化更为复杂：在氨气作用的初始阶段,铁颗粒的尺寸随氨气作用时间的延长而逐渐变大,但一段时间以后,铁颗粒的尺寸又随氨气作用时间的延长而变小,直到铁颗粒平均直径达到一个最小值（大约在氨气介入后的12min）,随后铁颗粒的尺寸又逐渐变大,并最终达到一稳定值。     

C?H Functionalization/Asymmetric Michael Addition Cascade Enabled by Relay Catalysis: Metal Carbenoid Used for C?C Bond Formation

A combination of either ruthenium(II) or rhodium(II) complexes and quinine‐derived squaramide enables 3‐diazooxindoles, indoles, and nitroalkenes to undergo highly efficient asymmetric three‐component reactions, thus affording optically active 3,3′‐bis(indole)s through a consecutive C C bond‐forming sequence, which turned out to be applicable to the facile total synthesis of (−)‐folicanthine.     

A Review on Optimization Production and Upgrading Biogas Through CO2 Removal Using Various Techniques

Biogas from anaerobic digestion of organic materials is a renewable energy resource that consists mainly of CH₄ and CO₂. Trace components that are often present in biogas are water vapor, hydrogen sulfide, siloxanes, hydrocarbons, ammonia, oxygen, carbon monoxide, and nitrogen. Considering the biogas is a clean and renewable form of energy that could well substitute the conventional source of energy (fossil fuels), the optimization of this type of energy becomes substantial. Various optimization techniques in biogas production process had been developed, including pretreatment, biotechnological approaches, co-digestion as well as the use of serial digester. For some application, the certain purity degree of biogas is needed. The presence of CO₂ and other trace components in biogas could affect engine performance adversely. Reducing CO₂ content will significantly upgrade the quality of biogas and enhancing the calorific value. Upgrading is generally performed in order to meet the standards for use as vehicle fuel or for injection in the natural gas grid. Different methods for biogas upgrading are used. They differ in functioning, the necessary quality conditions of the incoming gas, and the efficiency. Biogas can be purified from CO₂ using pressure swing adsorption, membrane separation, physical or chemical CO₂ absorption. This paper reviews the various techniques, which could be used to optimize the biogas production as well as to upgrade the biogas quality.     

大型公共建筑工程质量保险纯费率厘定研究——基于GLM及GAM的实证比较分析

为准确地厘定大型公共建筑工程质量的保险纯费率,通过文献分析及调研,对影响大型公共建筑工程质量的因素进行了研究,提炼出11项保险费率因子。以46栋竣工于1993—2016年的大型公共建筑为工程数据集,在频率-强度法基础上,基于Poisson、Negative Binomial、Gamma、Inverse Gauss等分布的假设,利用广义线性模型及广义可加模型建立了8个工程质量保险纯费率厘定模型,通过比较选择最优模型,并对模型进行了验证。结果表明,所建模型可用于大型公共建筑工程质量保险纯费率厘定。     

促红细胞生成素B螺旋表面肽的代谢稳定性结构修饰：设计、合成及其提高的肾保护作用

肾脏缺血缺氧以及再灌注过程都将导致肾小管上皮细胞凋亡,使肾功能严重受损.肾脏的缺血再灌注损伤是移植肾功能延迟恢复的主要原因并能诱导急慢性排斥,影响肾存活率.近年来发现,衍生于促红细胞生成素（EPO）的B螺旋亚基亲水表面序列的肽链（HBSP）,对肾脏缺血再灌注损伤具有显著的保护作用,但其在体内极短的半衰期（约2min）极大地限制了它的临床应用.因此,本研究采用构象约束、全D-构型氨基酸替换和N-端封闭策略,设计了3种类型的EPOB螺旋表面肽衍生物,旨在提高其代谢稳定性环肽的设计采用了对氧化还原稳定的硫醚键和相对刚性的亚砜键两种环合方式.在多肽的合成上,采用微波辅助多肽自动合成和手工合成两种模式有机结合;优化了硫醚环合工艺,应用微波加热进行硫醚环肽的合成,大大提高了产率和效率;利用圆二色（CD）谱确定了亚砜环肽的相对构型.活性实验表明,相对于线性母肽HBSP,本文设计合成的代谢稳定衍生肽对大/小鼠肾脏缺血再灌注损伤均有显著提高的保护作用,且硫醚和R-构型亚砜环肽的肾脏保护活性强于S-构型亚砜环肽.而且,环化确实提高了功能肽的血浆稳定性.因此,本文合成的硫醚环肽一周一次注射剂量等效于线性肽HBSP一日三次剂量对小鼠肾损伤的保护作用.     

注入锁定铜蒸气激光器的实验研究

使用两台相同的望远镜式非稳腔铜蒸气激光器,通过一块45°玻璃平板作腔的耦合组成匹配的注入锁定系统,研究了同步、注入信号功率和光束孔径大小等因素对输出功率和方向性的影响,实验结果清楚地表明,注入信号的作用在于抑制腔内高阶横模(包括被放大的自发发射)的竞争,使高增益介质的激光器既提高效率又改善方向性。注入锁定器件功率水平在5左右的情况下,其结果与单独非稳腔振荡相比,输出功率增加30～40％,方向性改善一倍以上。