Wide-band dereverberation method based on multichannel linear prediction using prewhitening filter

Several dereverberation algorithms have been studied. The sampling frequencies used in conventional studies are typically 8–16 kHz because their main purpose is preprocessing for improving the intelligibility of speech communication and articulation for automatic speech recognition. However, in next-generation communication systems, techniques to analyze and reproduce not only semantic information of sound but also more high-definition components such as spatial information and directivity will be increasingly necessary. To decompose these sound field characteristics with high definition, a dereverberation algorithm that is useful at high sampling frequencies is an important technique to process sound that includes high-frequency spectra such as musical sounds. The LInear-predictive Multichannel Equalization (LIME) algorithm is a promising dereverberation method. Using the LIME algorithm, however, a dereverberation signal cannot be solved at high sampling frequencies when the source signal is colored, such as in the case of speech and sound of musical signals. Because the rank of the correlation matrix calculated from such a colored signal is not full, the characteristic polynomial cannot be calculated precisely. To alleviate this problem, we propose preprocessing of all input signals with filters to whiten their spectra so that this algorithm can function for colored signals at high sampling frequencies.     

Mössbauer study of the crystallization products of a Fe75Zr25 amorphous alloy

The crystallization of the Fe₇₅Zr₂₅ as-milled amorphous alloy has been studied by Mössbauer spectroscopy. The process begins at around 880 K with the complete and fast crystallization of the amorphous phase into the crystalline α-Fe and Fe₂Zr ones but, from around 915 K, there is a sudden phase transformation into the Fe₂₃Zr₆ phase, which remains stable after cooling. A fitting for the Mössbauer contribution of the Fe₂₃Zr₆ phase, consistent with its crystalline structural features, has been obtained.     

Bottom-up fabrication and piezoelectric properties of CaBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> micro-plateaus

CaBi₄Ti₄O₁₅ (CBTi144) micro-plateaus were fabricated on Si wafers and Pt foils using a self-assembled monolayer (SAM) and a complex metal alkoxide solution. The micro-plateaus are delineated by metal masks, which are used for shadowing against the ultraviolet (UV) irradiation for decomposition of SAM to make the surface hydrophilic. The micro-plateaus crystallized to a ferroelectric phase with random orientation. The crystallization depended on the SAM-derived ultra thin layers at the surface of the substrates. The primitive PFM measurements without any top electrodes confirmed that the micro-plateaus exhibited the piezoresponse behaviors. The piezoelectric constant, d₃₃, had some distribution, and the maximum d₃₃ was confirmed as about 45 pm/V, which is identical to the d₃₃ of the polar-axis oriented CBTi144 thin films. PACS 77.84.-s; 81.20.Fw; 77.65.-j     

Fermi surface of CeIn3 above the Néel critical field

We report measurements of the de Haas-van Alphen effect in CeIn(3) in magnetic fields extending to approximately 90 T, well above the Néel critical field of mu(0)H(c) approximately 61 T. The unreconstructed Fermi surface a sheet is observed in the high magnetic field polarized paramagnetic limit, but with its effective mass and Fermi surface volume strongly reduced in size compared to that observed in the low magnetic field paramagnetic regime under pressure. The spheroidal topology of this sheet provides an ideal realization of the transformation from a "large Fermi surface" accommodating f electrons to a "small Fermi surface" when the f-electron moments become polarized.     

Combined volumetric T1, T2 and secular-T2 quantitative MRI of the brain: age-related global changes (preliminary results)

The combined T1, T2 and secular-T2 pixel frequency distributions of 24 adult human brains were studied in vivo using a technique based on the mixed-TSE pulse sequence, dual-space clustering segmentation and histogram gaussian decomposition. Pixel frequency histograms of whole brains and the four principal brain compartments were studied comparatively and as function of age. For white matter, the position of the T1 peak correlates with age (R2 =.7868) when data are fitted to a quadratic polynomial. For gray matter, a weaker age correlation is found (R2 =.3687). T2 and secular-T2 results are indicative of a weaker correlation with age. The technique and preliminary results presented herein may be useful for characterizing normal as well as abnormal aging of the brain, and also for comparison with the results obtained with alternative quantitative MRI methodologies.     

Simultaneous measurements of indoor radon and thoron and inhalation dose assessment in Douala City,Cameroon

ABSTRACT

Radon, thoron and associated progeny measurements have been carried out in 71 dwellings of Douala city, Cameroon. The radon–thoron discriminative detectors (RADUET) were used to estimate the radon and thoron concentration, while thoron progeny monitors measured equilibrium equivalent thoron concentration (EETC). Radon, thoron and thoron progeny concentrations vary from 31?±?1 to 436?±?12 Bq?m^–3, 4?±?7 to 246?±?5 Bq?m^–3, and 1.5?±?0.9 to 13.1?±?9.4 Bq?m^–3. The mean value of the equilibrium factor for thoron is estimated at 0.11?±?0.16. The annual effective dose due to exposure to indoor radon and progeny ranges from 0.6 to 9?mSv?a^–1 with an average value of 2.6?±?0.1?mSv?a^–1. The effective dose due to the exposure to thoron and progeny vary from 0.3 to 2.9?mSv?a^–1 with an average value of 1.0?±?0.4?mSv?a^–1. The contribution of thoron and its progeny to the total inhalation dose ranges from 7 to 60?% with an average value of 26?%; thus their contributions should not be neglected in the inhalation dose assessment.     

Stress-assisted nucleation and growth of γ″ and γ′ precipitates in a Cu–1.2 wt%Be–0.1 wt%Co alloy aged at 320°C

An investigation by high-resolution transmission electron microscopy of the precipitation process during ageing a Cu–1.2?wt%Be–0.1?wt%Co alloy at 320°C has revealed that the transition phases follow a γ″→ γ″?+?γ′?→?γ sequence. The γ′ phase heterogeneously precipitates on the γ″ phase. The effects of an external stress on the nucleation and growth of disc-shaped γ″ and plate-shaped γ′ precipitates have been examined for the alloy aged at 320°C. A compressive stress applied in the [001] direction during ageing preferentially accelerates the nucleation and growth of the γ″ variant normal to the [001] axis among three crystallographically equivalent variants and the specific four γ′ variants formed on the γ″ variant normal to the [001] axis. A tensile stress does not significantly affect those of γ″ and γ′ precipitates. The critical diameter of the disc-shaped γ″ nucleus is estimated as about 1?nm from evaluation of the interaction energy between the applied stress and the misfit strains of γ″ precipitates. It is proposed that applied external stress does not affect the diffusion rate but the interphase boundary velocity.     

Determining the structure of phosphorus in phase IV

We explore the unknown structure of phosphorus in phase IV (P-IV phase) based on first-principles calculations using the metadynamics simulation method. Starting from the simple cubic structure, we find a new modulated structure of the monoclinic lattice. The modulation is crucial to the stability of the structure. Through refining the structure further by changing the modulation period, we find the structure whose x-ray powder diffraction pattern is in best agreement with the experimental pattern. We expect that the modulation period of the structure in the P-IV phase is very close to that found in this study and probably incommensurate.     

R-matrices for elliptic Calogero-Moser models

The classicalR-matrix structure for then-particle Calogero-Moser models with (type IV) elliptic potentials is investigated. We show there is no momentum independentR-matrix (without spectral parameter) whenn 4. The assumption of momentum independence is sufficient to reproduce the dynamicalR-matrices of Avan and Talon for the type I, II, III degenerations of the elliptic potential. The inclusion of a spectral parameter enables us to findR-matrices for the general elliptic potential.