Insoluble monolayers of irisresorcinol at the air/water interface

Monolayer properties of irisresorcinol [5-(cis-10-heptadecenyl) resorcinol] were measured at the air/water interface. TheA-T isobars of the monolayers at 10 and 15 mN/m gave two-dimensional thermal expansivities of 1.4 × 10^–4/K and 1.3 × 10^–4/K at a temperature span from 7–40 C, respectively. The- A isotherms of the material showed only a little dependence on temperature from 5–35 C and onpH except at highpH, where monolayers expanded by ionization of resorcinol headgroups. Some types of saccharose in the subphase exhibited a characteristic interaction with irisresorcinol in monolayers, and there is a possibility that this material will be used for molecular recognition of some saccharoses.     

Novel stereoselective control over cis vs trans opening of benzo[c]phenanthrene 3,4-diol 1,2-epoxides by the exocyclic N(2)-amino group of deoxyguanosine in the presence of hexafluoropropan-2-ol

We describe a novel and efficient synthesis (62-84% yields) of the eight possible, diastereomerically pure, cis and trans, R and S O(6)-allyl-protected N(2)-dGuo phosphoramidite building blocks derived through cis and trans opening of (+/-)-3alpha,4beta-dihydroxy-1beta,2beta-epoxy-1,2,3,4-tetrahydrobenzo[c]phenanthrene [BcPh DE-1 (1)] and (+/-)-3alpha,4beta-dihydroxy-1alpha,2alpha-epoxy-1,2,3,4-tetrahydrobenzo[c]phenanthrene [BcPh DE-2 (2)] by hexafluoropropan-2-ol (HFP)-mediated addition of O(6)-allyl-3',5'-di-O-(tert-butyldimethylsilyl)-2'-deoxyguanosine (3) at C-1 of the epoxides. Simply changing the relative amount of HFP used in the reaction mixture can achieve a wide ratio of cis/trans addition products. Thus, the observed cis/trans adduct ratio for the reaction of DE-1 (1) in the presence of 5 equiv of 3 varied from 17/83 to 91/9 over the range of 5-532 equiv of HFP. The corresponding ratios for DE-2 (2) varied from 2/98 to 61/39 under the same set of conditions. When 1 or 2 was fused with a 20-fold excess of 3 at 140 degrees C in the absence of solvent HFP, almost exclusive trans addition (>95%) was observed for the both DEs. Through the use of varying amounts of HFP in the reaction mixture as described above, each of the eight possible phosphoramidite oligonucleotide building blocks (DE-1/DE-2, cis/trans, R/S) of the BcPh DE N(2)-dGuo adducts can be prepared in an efficient fashion. To rationalize the varying cis-to-trans ratio, we propose that the addition of 3 to 1 or 2 in the absence of solvent or in the presence of small amounts of HFP proceeds primarily via an S(N)2 mechanism to produce mainly trans-opened adducts. In contrast, increasing amounts of HFP promote increased participation of an S(N)1 mechanism involving a relatively stable carbocation with two possible conformations. One of these conformations reacts with 3 to give mostly trans adduct, while the other conformation reacts with 3 to give mostly cis adduct.     

Antifungal activity of crown ethers

Some crown ethers were found to show significant antifungal activity against some wood-decay fungi, phytopathogenic fungi and eumycetes,Trichophytons for dermatomycosis. Their toxicity was evaluated by the paper disc method as well as by determining the values of ED₅₀, i.e., the concentration which inhibits the mycelium growth by 50%. The fungi examined areTyromyces palustris, Picnoporous coccineus, Coriolous versicolor, Pyricularia filamentosa, Fusarium sp., Trichophyton rubrum, Trichophyton sp., etc. Among the 26 crown ethers tested, 3,5-di-t-butyl-benzo-15-crown-5 showed relatively high activity, the highest ED₅₀ value of which being 8 M or 3 ppm. Other alkylbenzocrown ethers, dicyclohexyl crown ethers and Kryptofix 22DD also showed considerable activity. On the other hand, unsubstituted crown ethers, benzocrown ethers with a polar substituent, Kryptofix 222B and Kryptofix 221 were inactive.     

Acid-catalyzed reaction of pyrazolo[1,5-a]pyridines with aldehydes: Formation of bis(pyrazolo[1,5-a]pyrid-3-yl)methane

Reaction of pyrazolo[1,5-a]pyridines with aldehydes in the presence of trifluoroacetic acid gave bis[pyrazolo[1,5-a]pyrid-3-yl)methanes in high yields.     

Ultra-slow Relaxation Dynamics in Triglycine Sulfate and D-Sorbitol Studied by Time-resolved Spectroscopy

The ultra-slow modes with a relaxation time much longer than 1 ns are discovered by a time-resolved spectroscopy in uniaxial ferroelectric (NH₂CH₂COOH)₃H₂SO₄ (TGS) and in glass-former HOCH₂(CHOH)₄CH₂OH (D-sorbitol). A mode discovered in TGS is a thermal relaxational mode and is proved to be the physical origin of the central peak found by Brillouin scattering. Two modes are discovered in D-sorbitol. One is a thermal relaxational mode. The other is a mode characterized by the Kohlraush-Williams-Watts function with a relaxation time _R. A remarkable result is that _R indicates a critical behavior not at the liquid-glass transition temperature T_g =–7°C but at the ergodic to nonergodic transition temperature T_c=33°C.This revised version was published online in November 2005 with corrections to the Cover Date.     

Diarylurea-linked zinc porphyrin dimer as a dual-mode artificial receptor: supramolecular control of complexation-facilitated photoinduced electron transfer

A novel porphyrinic receptor 1 in which two zinc porphyrins are bridged by two diarylurea linkers was developed for recognition of a viologen derivative (hexyl viologen, HV). The electronic absorption spectra as well as the 1H NMR experiments revealed that the HV molecule was bound to the cleft in 1 mainly through carbonyl dipole-charge interactions to afford a 1:1 complex. From the steady-state fluorescence spectroscopic study, the photoinduced electron transfer (PET) from 1 to HV was extremely facilitated by the receptor-substrate complexation. The receptor 1 also formed a 1:1 complex with 1,4-diazabicyclo[2.2.2]octane (DABCO) through two Zn-N coordination interactions, and, using DABCO as an inhibitor, we suppressed the PET reaction via the substrate exchange.     

Broad spectrum and mode of action of an antibiotic produced byScytonema sp. TISTR 8208 in a seaweed-type bioreactor

A photobioreactor was constructed using anchored polyurethane foam strips (1 x 1 x 40 cm) fixed onto a stainless-steel ring to prevent flotation, as a biomass support material (BSM). This type of reactor was named a seaweed-type bioreactor. A filamentous cyanobacterium, Scytonema sp. TISTR 8208, which produces a novel cyclic dodecapeptide antibiotic, was immobilized in seaweed-type photobioreactor and cultivated with air containing 5% CO₂ sparged at a gas flow rate of 250 mL/min under illumination at a light intensity of 200 μmol photon m^-2s^-1. The antibiotic produced in the seaweed-type photobioreactor was purified by HPLC and examined regarding its spectrum and mode of action. The antibiotic effectively inhibited the growth of Gram-positive bacteria, pathogenic yeasts, and filamentous fungi, but it had only a weak effect on Gram-negative bacteria. Scanning electron micrograph analysis showed that the most characteristic change was swelling of the cells after exposure to the antibiotic. The antibiotic seems to alter the conformation of the microbial cell membrane, thereby changing its permeability, leading to osmotic shock.     

Highly accurate and precise multielement determination of environmental samples by means of photon activation using the internal standard method

In order to examine effective applications of the newly developed internal standard method, determinations of Cr, Co, Ni, Zn, As, Rb, Sr, Y, Zr, Nb, Cs, Ce and Pb in three environmental materials, such as pond, lake and estuarine sediments, have been tried by means of photon activation. In these examinations, some major constituent elements in the above sediments were properly used as excellent and effective internal standards. In consequence, it was confirmed that highly accurate and precise determinations of the above 13 elements were achieved easily and favourably.     

A Puckered Singlet Cyclopentane‐1,3‐diyl: Detection of the Third Isomer in Homolysis

In the photochemical denitrogenation of 1,4‐diaryl‐2,3‐diazabicyclo[2.2.1]heptane ( AZ6 ) bearing sterically hindered substituents, a curious new absorption band at about 450 nm was observed under low‐temperature matrix conditions, together with the previously well‐characterized planar singlet diradical pl‐¹ DR6 with λ_max=≈580 nm. The 450 nm species was electron paramagnetic resonance (EPR)‐silent. Instead of generating the planar diradical pl‐¹ DR6 and the precursor azoalkane AZ6 upon warming, the ring‐closed bicyclo[2.1.0]pentane derivative SB6 , that is, the AZ6 denitrogenation product was identified. Based on product analysis, low‐temperature spectroscopic observations, high‐level quantum‐mechanical computations, viscosity effect, and laser‐flash photolysis, the puckered singlet diradicaloid puc‐¹ DR6 was assigned to the new 450 nm absorption. The latter was detected experimentally at the same time as the planar singlet diradical pl‐¹ DR6 . Sterically demanding substituents as well as viscosity impediments were essential for the detection of the experimentally hitherto unknown puckered singlet cyclopentane‐1,3‐diyl diradicaloid puc‐¹ DR6 , that is, the third isomer in homolysis. The present findings should stimulate future work on the mechanistically fascinating stereoselectivity documented in the formation of bicyclo[2.1.0]pentanes during the 2,3‐diazabicyclo[2.2.1]heptane denitrogenation.