新型氧离子导体La2Mo1.8Ga0.2O9陶瓷的合成及其电性能

通过高温固相合成法首次合成了La₂Mo_1.8Ga_0.2O₉陶瓷样品. 粉末XRD结果表明, 该样品为单一立方相La₂Mo₂O₉结构. 以陶瓷样品为固体电解质、多孔性铂为电极, 采用交流阻抗谱、气体浓差电池、氧泵等方法研究了样品在600～1000 ℃下各种气氛中的离子导电特性. 结果表明, 氧浓差电池电动势的实测值与理论值吻合得很好, 氧离子迁移数为1, 表明该陶瓷样品在该温度下氧气气氛中为一纯氧离子导体; 氧泵(氧的电化学透过)实验结果进一步证实了该样品在氧气气氛中为一纯氧离子导体; 在氧分压p(O₂)＝10^－5～10⁵ Pa的高氧分压气氛中, 电导率与氧分压变化基本无关, 表明在该氧分压范围内样品为纯离子导体, 这与氧浓差电池电动势测定结果相吻合; 在低氧分压为10^－5～10^－15 Pa范围内, 总电导率随氧分压降低而稍有升高, 表明在该氧分压范围样品为氧离子与电子的混合导体; 在600～1000 ℃下氧离子电导率＞10^－2 S•cm^－1, 显著高于母体La₂Mo₂O₉的氧离子电导率, 1000 ℃时的氧离子电导率为0.07 S•cm^－1.     

Direct Electrochemistry of Hemoglobin Immobilized in Sodium Alginate Film on the Ionic Liquid [BMIM]PF6 Modified Carbon Paste Electrode

In recent years the direct electron transfer of redox protein on electrode surface has attracted great attentions1. Different kind of modified electrode and various supporting films for immobilization of proteins had been proposed. But most of them are ba…     

Ln(Ⅲ)与2-羟基-1-萘醛缩蛋氨酸盐及邻菲咯啉三元配合物的合成与表征

合成了稀土硝酸盐与希夫碱盐2-羟基-1-萘醛缩蛋氨酸钾(以KL表示)及邻菲咯啉(Phen)的四种固体三元配合物。通过元素分析，IR，UV，DTA-TG及摩尔电导分析等手段确定配合物的组成为[Ln(L)(Phen)(NO3)(H2O)]NO3(Ln＝Gd，Dy，Er，Yb)，并对它们的配合方式及某些物理和化学性质进行了研究。     

Dynamic coating of a capillary with room-temperature ionic liquids for the separation of amino acids and acid drugs by capillary electrophoresis

A room-temperature ionic liquid (IL), 1-ethyl-3-methyl-imidazolium tetrafluoroborate (1E-3MI-TFB), used for the coating of a silica capillary enables one to reduce or invert the electroosmotic flow (EOF) in capillary zone electrophoresis. Excellent separations of amino acids and ary lalkanoic acids were obtained. Such separations could not be obtained in a naked capillary in the presence of the cationic surfactants cetyltrimethylammonium bromide (CTAB) or polycationic polymer hexadimethrine bromide (HDB). The results indicate that 1E-3MI-TFB not only modulates the EOF but also acts as a discriminator. Further experiments indicate that the interaction between hydrogen at C-2 carbon of IL and acid drugs plays an important role in the separation. The text was submitted by the authors in English.     

Long‐range π‐type hydrogen bond in dimers CH2?HF,CH2O?H2O,and CH2O?NH3

Using four basis bets, (6‐311G(d,p), 6‐31+G(d,p), 6‐31++G(2d,2p), and 6‐311++G(3df,3pd), the optimized structures with all real frequencies were obtained at the MP2 level for the dimers CH₂O? HF, CH₂O? H₂O, CH₂O? NH₃, and CH₂O? CH₄. The structures of CH₂O? HF, CH₂O? H₂O, and CH₂O? NH₃ are cycle‐shaped, which result from the larger bend of σ‐type hydrogen bonds. The bend of σ‐type H‐bond O…H? Y (Y?F, O, N) is illustrated and interpreted by an attractive interaction of a chemically intuitive π‐type hydrogen bond. The π‐type hydrogen bond is the interaction between one of the H atoms of CH₂O and lone pair(s) on the F atom in HF, the O atom in H₂O, or the N atom in NH₃. In contrast with the above three dimers, for CH₂O? CH₄, because there is not a π‐type hydrogen bond to bend its linear hydrogen bond, the structure of CH₂O? CH₄ is noncyclic shaped. The interaction energy of hydrogen bonds and the π‐type H‐bond are calculated and discussed at the CCSD (T)/6‐311++G(3df,3pd) level. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

Thermal degradation kinetics of polyimide containing 2,6-benzobisoxazole units

A novel polyimide (PI) based on 2,6-bis(p-aminophenyl)-benzo[1,2-d;5,4-d′]bisoxazole has been synthesized via a conventional two-stage procedure with bis(ether anhydrides) (HQDPA). The intermediate poly(amic acid) had inherent viscosities of 1.70 dl/g and could be thermally converted into light yellow polyimide film. The resulted polyimide showed excellent thermal stability, and the glass transition temperatures (T_g) were above 283 °C, the 5% weight loss temperature of the polymer was at 572 °C in N₂. The thermal degradation of the polyimide was studied by thermogravimetric analysis (TGA) in order to determine the actual reaction mechanisms of the decomposition process. The activation energy of the solid-state process was determined using Flynn-Wall-Ozawa method, which does not require knowledge of the reaction mechanism, which resulted to be 361.36 kJ/mol. The activation energy of different mechanism models and pre-exponential factor (A) were determined by Coats-Redfern method. Compared with the value obtained from the Ozawa method, the actual reaction mechanism obeyed nucleation and growth model, Avrami-Erofeev function (A₃) with integral form g(X) = [−ln(1−X)]³.     

MCM-41分子筛负载钼钴系催化剂的噻吩HDS研究

通过氧吸附量、噻吩吸附热及反应速率常数的测定，研究了MoO3/MCM-41、MoO3-CoO(NiO)/MCM-41系列催化剂，发现，对于MoO3/MCM-41催化剂，当MoO3的质量分数（以MCM－41为底数，即MCM－41＝1g时，MoO3含量为0．15g，下同）从15％增加到20％时，其噻吩的加氢硫（HDS）活性增大，至25％时活性下降，所对应的氧吸附量（mL/g催化剂）也是先增大后减少，并且两者有很好的线性对应关系，而且噻吩吸附热则基本保持不变，采用不同的MoO3-CoO(NiO)浸渍顺序制备的MoO3-CoO(NiO)/MCM-41催化剂中，先浸渍CoO(NiO）再浸渍MoO3的催化剂，其噻吩HDS活性明显优于对其它浸渍顺序制备的催化剂，同时催化剂的氧吸附量和噻吩吸附热也最大。     

Anion and Additive Effects on the Structure of Mercury(II) Halides Complexes with Tripodal Ligand

The metal complexes [Hg₂(tbim)₂Br₄]·2DMF ( 1 ) and [Hg₂(tbim)I₄]·1.5DMF ( 2 ) were prepared by reactions of 1,3,5‐tris(benzimidazol‐1‐ylmethyl)‐2,4,6‐trimethylbenzene (tbim) with HgBr₂, HgI₂, respectively, and [Hg₂(tbim)I₄]·0.5(FeCp₂)·H₂O ( 3 ) was obtained by the same method with addition of ferrocene (FeCp₂) as additive. Their structures were determined by X‐ray crystallographic analyses. Complex 1 has a macrocyclic binuclear structure with one benzimidazole arm of the ligand free of coordination and the binuclear units are further connected by C‐H···N hydrogen bonds to give an infinite zigzag chain. Complexes 2 and 3 have a 2D network structure in which tbim serves as a tridentate ligand. The results showed that the halides of bromide and iodide have remarkable impact on the structure of the complexes. The FeCp₂ molecules are trapped in the voids of framework 3 .     

Spectroscopy and Structure of Sol-Gel Systems

Sol-gel derived glasses may differ from conventional melt-quenched glasses owing to the peculiar microstructures existing at the gel state, such that, even after gel densification, some differences may remain in their composition and molecular structure.This paper discusses structural characteristics of thin film oxide gels and glasses, with a special emphasis on SiO2-TiO2 based systems, which are of particular interest for sol-gel integrated optics applications. Short range structure aspects are discussed based on infrared, X-ray photoemission and X-ray photoabsorption spectroscopies. The chemical homogeneity of sol-gel materials is evaluated, based on X-ray photoemission and nuclear magnetic resonance spectroscopies, dealing in particular with the issue of homo- vs. heterocondensation. Finally, some microstructural features of sol-gel derived films are analyzed, namely the relationship between infrared absorption and porosity and the structure of nanocrystalline sol-gel films, based on grazing incidence X-ray diffraction and micro-Raman spectroscopy. The types of structural information obtainable by each different technique are compared in detail.