Diffusion coefficient measurement in a microfluidic analyzer using dual-beam microscale-refractive index gradient detection. Application to on-chip molecular size determination

We report a microchip-based detection scheme to determine the diffusion coefficient and molecular mass (to the extent correlated to molecular size) of analytes of interest. The device works by simultaneously measuring the refractive index gradient (RIG) between adjacent laminar flows at two different positions along a microchannel. The device, referred to as a microscale molecular mass sensor (micro-MMS), takes advantage of laminar flow conditions where the mixing of two streams occurs essentially by diffusion across the boundary between the two streams. Two flows merge on the microchip, one containing solvent only, referred to as the mobile phase stream and one which contains the analyte(s) of interest in the solvent, i.e. the sample stream. As these two streams merge and flow parallel to each other down the microchannel a RIG is created by the concentration gradient. The RIG is further influenced by analyte diffusion from the sample stream into the mobile phase stream. Measuring the RIG at a position close to the merging point (upstream signal) and simultaneously a selected distance further down the microchannel (downstream signal) provides real-time data related to the extent a given analyte has diffused, which can be readily correlated to analyte molecular mass by taking the ratio of the downstream-to-upstream signals. For the dual-beam RIG measurements, a diode laser output is coupled to a single mode fiber optic splitter with two output fibers. Light from each fiber passes through a graded refractive index (GRIN) lens forming a collimated beam that then passes through the microchannel and then on to a position sensitive detector (PSD). The RIG at both detection positions deflects the two collimated probe beams. The deflection angle of each beam is then measured on two separate PSDs. The micro-MMS was evaluated using polyethylene glycols (PEGs), sugars, and as a detector for size-exclusion chromatography (SEC). Peak purity can be readily identified using the micro-MMS with SEC. The limit of detection was 0.9 ppm (PEG at 11 840 g/mol) at the upstream detection position corresponding to a RI limit of detection (LOD) (3sigma) of 7-10(-8) RI. The pathlength for the RIG measurement was 200 microm and the angular LOD was 0.23 micro(rad) with a detection volume of 8 nl at both positions. The average molecular mass resolution was 9% (relative standard deviation) for a series of PEGs ranging in molecular mass from 106 to 22 800 g/mol. With this excellent mass resolution, small molecules such as monosaccharides, disaccharides, and so on, are readily distinguished. The sensor is demonstrated to readily determine unknown diffusion coefficients.     

Application of the least-squares method in the matrix form: simultaneous spectrophotometric determination of rifampicin and isoniazid in binary pharmaceutical formulations

A least-squares method in the matrix form is described for the simultaneous determination of rifampicin and isoniazid in a mixture. The method allows the rapid analysis of binary pharmaceutical formulations with minimum error. The concentration of each component in the mixture has been determined spectrophotometrically by measuring the absorbance of the mixture at 5-nm intervals from 230 to 290 nm. To calculate the matrix of the proportionality constant a standard mixture was used for each component. All data analyses were performed on a personal computer.     

The lignol approach to biorefining of woody biomass to produce ethanol and chemicals

Processes that produce only ethanol from lignocellulosics display poor economics. This is generally overcome by constructing large facilities having satisfactory economies of scale, thus making financing onerous and hindering the development of suitable technologies. Lignol Innovations has developed a biorefining technology that employs an ethanol-based organosolv step to separate lignin, hemicellulose components, and extractives from the cellulosic fraction of woody biomass. The resultant cellulosic fraction is highly susceptible to enzymatic hydrolysis, generating very high yields of glucose (>90% in 12–24h) with typical enzyme loadings of 10–20 FPU (filter paper units)/g. This glucose is readily converted to ethanol, or possibly other sugar platform chemicals, either by sequential or simultaneous saccharification and fermentation. The liquor from the organosolv step is processed by well-established unit operations to recover lignin, furfural, xylose, acetic acid, and a lipophylic extractives fraction. The process ethanol is recovered and recycled back to the process. The resulting recycled process water is of a very high quality, low BOD₅, and suitable for overall system process closure. Significant benefits can be attained in greenhouse gas (GHG) emission reductions, as per the Kyoto Protocol. Revenues from the multiple products, particularly the lignin, ethanol and xylose fractions, ensure excellent economics for the process even in plants as small as 100 mtpd (metric tonnes per day) dry woody biomass input—a scale suitable for processing wood residues produced by a single large sawmill.     

Co-precipitation in some binary sulphate systems

Studies have been made of the distribution behaviour of tracers with alkaline earth sulphates, using the technique of precipitation from homogeneous solution. The co-precipitation of strontium with barium sulphate and of lead, lanthanum, and yttrium, separately, with barium sulphate, and with strontium sulphate, were investigated. Although there was qualitative correlation between the observed values of the distribution coefficient and the theoretical solubility product ratios for each of the binary systems studied, the divergence between theory and observation was so great that it seems unlikely that there is any quantitative correlation.     

LC-MS–MS Determination of Pregabalin in Human Plasma

A rapid, sensitive and specific method to quantify pregabalin in human plasma using metaxalone as the internal standard is described. Sample preparation involved simple protein precipitation by using acetronitrile as solvent. The extract was analyzed by high-performance liquid chromatography coupled to electrospray tandem mass spectrometry (LC-MS–MS). Chromatography was performed isocratically on Thermo Hypurity C₁₈ 5 μm analytical column, (50 mm × 4.6 mm i.d.). The assay of pegabalin was linear calibration curve over the range 10.000–10000.000 ng mL^?1. The lower limit of quantification was 10.000 ng mL^?1 in plasma. The method was successfully applied to the bioequivalence study of pregabalin capsules (150.0 mg) administered as a single oral dose.     

The s-p bonded representatives of the prominent BaAl4 structure type: a case study on structural stability of polar intermetallic network structures

This work presents a detailed, combined experimental and theoretical study on the structural stability of s-p bonded compounds with the BaAl4 structure type (space group I4/mmm, Z = 2) as part of a broad program to investigate the complex questions of structure formation and atomic arrangements in polar intermetallics. From ab initio calculations employing pseudopotentials and a plane wave basis set, we extracted optimized structural parameters, binding energies, and the electronic structure of the systems AeX(III)4, AeX(II)2X(IV)2, AeX(II)2X(III)2 (Ae = Ca, Sr, Ba; X(II) = Mg, Zn; X(III) = Al, Ga; X(IV) = Si, Ge). For all systems we found a pronounced pseudo-gap in the density of states separating network X42- bonding from antibonding electronic states that coincides with the Fermi level for an electron count of 14 electrons per formula unit, the optimum value for stable BaAl4-type polar intermetallics. However, the synthesis and structural characterization (from X-ray single crystal and powder diffraction data) of the new compounds AeZn2-Al2+, AeZn2-deltaGa2+delta (Ae = Ca, Sr, Ba; delta = 0-0.2) and AeMg0.9Al3.1, AeMg1.7Ga2.3 (Ae = Sr, Ba) manifested that electron deficiency is rather frequent for BaAl4-type polar intermetallics. The site preference for different "X" elements in the ternary systems was quantified by calculating "coloring energies", which, for some systems, was strongly dependent on the size of the electropositive Ae component. The Ae2+ cations decisively influence the nearest neighbor distances in the encapsulating polyanionic networks X4(2-) and the structures of these networks are surprisingly flexible to the size of the Ae component without changing the overall bonding picture. A monoclinically distorted variant of the BaAl4 structure occurs when the cations become too small for matching the size of encapsulating X4(2-) cages. An even larger size mismatch leads to the formation of the EuIn4 structure type.     

Spectrophotometric determination of pentaerythritol tetranitrate (PETN) in waste water from lead styphnate primer plants

An accurate spectrophotometric method is proposed for the determination of pentaerythritol tetranitrate (PETN) in waste water from lead styphnate primer plants by use of phenoldisulphonic acid. The waste water is filtered through a sintered glass crucible and the PETN is determined in the filtrate and the residue. In the determination of PETN in the filtrate, sodium hydroxide is added and the PETN is extracted with methylene chloride (in alkaline solution, styphnate and TNT are not extracted). The methylene chloride solution is then evaporated to dryness, the residue is treated with a solution of phenoldisulphonic acid in sulphuric acid, water and ammonia are added, and the yellow colour is measured. In the determination of PETN in the residue, the PETN is dissolved in acetone, an aliquot of the acetone solution is treated with water and sodium hydroxide, the PETN is extracted with methylene chloride and the colour is developed as above. Various factors affecting the determination were investigated. The solubility of PETN in water was studied.