Thermal decomposition of lignocellulosic materials: comparison of the results obtained in different experimental systems

An experimental system that allows the use of large particle sizes and the simulation of different operating conditions was built to study the thermal decomposition of lignocellulosic materials. The values of solid conversion and of temperature obtained at different points using spherical particles of pine wood 2 cm in diameter are shown. The conversion values are compared with those calculated from the equations obtained in a thermobalance for small particle sizes.     

硅灰石矿物发光原料中Fe2+的去除与CaSiO3∶Eu3+的光谱特性

提出了用草酸．邻菲哕啉去除硅灰石中Fe^2 的方法，研究了浸取剂的浓度、浸取时间和温度等条件对Fe^2 的去除率的影响，在最佳的浸取条件下，Fe^2 的去除率达到98．35％。在去除猝灭剂后的硅灰石矿物中，掺加适量的稀土激活剂Eu^3 ，通过高温固相法制成荧光发光材料，发光强度明显提高，接近于化学试剂合成的发光材料。     

An in vitro investigation of human enamel wear by restorative dental materials

A radiometric method was applied to assess enamel wear by another enameland by restorative materials. The radioactive enamel was submitted to wearin a machine which allows sliding motion of an antagonistic surface in contactwith the radioactive enamel. The enamel wear was evaluated by measuring thebeta-activity of ³²P transferred to water from this irradiatedtooth. Results obtained indicated that dental porcelains cause pronouncedenamel wear when compared with that provoked by another natural enamel orby resin materials. Resin materials caused less enamel wear than another naturalenamel. Vickers microhardness data obtained for antagonistic materials showeda correlation with the wear caused to the enamel.     

Preparation of USY zeolite VOx supported catalysts from V(AcAc)3 and NH4VO3. Catalytic properties for the dehydrogenation of n-butane in oxygen-free atmosphere

The preparation of different samples of vanadia supported on ultrastable zeolite (VO(x)/USY) is discussed. The samples were prepared in order to obtain highly dispersed V-species, avoiding the formation of crystalline vanadia and the destruction of the zeolite framework. Two methods were employed for preparing VO(x)/USY samples: an organic route using V(AcAc)3 and an inorganic route using NH4VO3. The characterization of the samples was performed with XRD, TPR, NH3-TPD, and N2 isotherms. From these results it is concluded that when VO(x) is supported on the surface of USY from acidic aqueous solution of ammonium metavanadate, the destruction of the zeolite framework is accomplished. For higher pH values in the impregnating solution, undesired V2O5 is formed on the USY surface. On the other hand, VO(x)/USY prepared from the organic precursor shows no destruction of the USY structure. In addition, highly dispersed VO(x) are formed, though for relatively high V loadings (6%) an obstruction of the zeolite windows takes place. The samples are tested as catalysts for gas phase dehydrogenation of n-butane to olefins. The catalysts prepared from NH4VO3 are almost inactive for the reaction. On the other hand, both samples prepared from V(AcAc)3 present initial conversion levels in the 8-12% range. However, the selectivity depends on the V loading, the catalysts with 6% loading being the most selective (75%). The catalytic patterns of the samples (activity and selectivity) are in agreement with the physicochemical features of the VO(x)/USY surface.     

Correlations between Van der Waals' volume and retention index general equation applicable to different homologous series

Summary Correlations between retention index (R_I) and Van der Waals' volume (V_W) in homologous series of n-alcohols, n-aldehydes and esters are studied on the stationary phases Carbowax 1540 and squalane. Influence of functional groups is quantified and a method for obtaining one general equation, valid for an indeterminate number of homologous series, is proposed.     

Reactions of thiosemicarbazones derived from beta-keto amides and beta-keto esters with Zn(II) and Cd(II) acetates: influence of metal, substitution, reagent ratio and temperature on metal-induced cyclization

Zinc(II) and cadmium(II) acetates were reacted in methanol under various experimental conditions with thiosemicarbazones derived from beta-keto amides or beta-keto esters (HTSC). Some of these reactions afforded thiosemicarbazonate complexes [M(TSC)2] with IR and NMR spectra compatible with N,S-coordination, but most gave complexes [ML2], where HL is a substituted 2,5-dihydro-5-oxo-1H-pyrazole-1-carbothioamide resulting from cyclization of the HTSC. Some of these pyrazolonates and two of the HL ligands were studied by X-ray diffractometry, and their structures are discussed. Surprisingly, the reactions of zinc(II) acetate with HTSC in 1:1 mol ratio usually gave a third, previously unreported type of complex with a dideprotonated ligand, [Zn(L-H)], which was also formed when [ZnL2] and Zn(OAc)2 interacted at room temperature in 1:1 mol ratio. These L-H complexes are highly insoluble in all common solvents, which hinders their characterization but suggests that they are polymeric in nature.     

Cycloaddition reactions of 2,4-diphenyl-1,3-diazabuta-1,3-dienes with isocyanates and isothiocyanates

The cycloaddition reactions of 1-p-tolyl and 1-benzyl- 2,4-diphenyl-1,3-diazabuta-1,3-dienes with a variety of aryl and alkyl isocyanate and isothiocyanate are described. The reaction mechanism is also discussed.     

Construction of functional porphyrin polystyrene nano-architectures by ATRP

A series of mono-functionalized metallo-porphyrin polystyrenes have been synthesized using atom transfer radical polymerization and their self-assembling behavior was studied by electron microscopy showing that the polystyrene tail-length influences the aggregate architecture.     

Flow-through optical fiber sensor for automatic sulfide determination in waters by multisyringe flow injection analysis using solid-phase reflectometry

A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater).     

Study of 7-azaindole in its first four singlet states

The molecular structure and properties of 7-azaindole in its first four singlet states were studied with a view to improving current understanding of the photophysical behavior of its C(2h) dimer. This dimer, which exhibits a double proton transfer via its two hydrogen bonds upon electronic excitation, has for 35 years been used as a model for the photophysical behavior of DNA base pairs. Electronic excitation of 7-azaindole simultaneously increases its acidity and basicity; these changes facilitate a concerted mechanism for the double proton transfer in the dimer. In this work, we found the acidity and basicity changes to occur only in its first pi,pi(*) excited singlet state.