Use of kinetic plots for relative assessment of reactor throughput and energy consumption

The progress of high temperature processes is generally described in terms of variation of the degree of conversion () with time (t). The present paper outlines a procedure for making use of-t plots for comparative assessment of productivity and energy requirements for a test system with respect to a reference, on the basis of some simplifying assumptions. It is assumed that the throughput is inversely proportional to reaction time as in the case of batch reactors and plug flow reactors. It is also assumed that the energy requirement is a simple function of process temperature. The principles outlined is illustrated with reference to some laboratory data for reduction of iron oxide by coal.The authors wish to thank Prof. P. R. Rao, Director National Metallurgical Laboratory, Jamshedpur, India, for providing facilities for experimental work and for according permission to publish this work.     

Mixed-ligand complexes of copper with some amino-acids and malonate

The mixed-ligand complexes formed by copper(II) with an amino-acid (valine, threonine, isoleucine, aspartic acid, glutamic acid, lysine) and malonic acid have been investigated polarographically and their stability constants determined. The complexes are less stable than the corresponding complexes with oxalic acid instead of malonic, but also exhibit less disproportionation into the simple complexes, because the simple oxalate complexes are more stable than the malonate complexes.     

Theoretical study of structure,vibrational and electronic spectra of isomers of methyl-3-methoxy-2-propenoate

A systematic quantum mechanical study of the possible conformations, their relative stabilities, vibrational and electronic spectra and thermodynamic parameters of methyl-3-methoxy-2-propenoate has been reported for the electronic ground (S₀) and first excited (S₁) states using time-dependent and time-independent Density Functional Theory (DFT) and RHF methods in extended basis sets. Detailed studies have been restricted to the E-isomer, which is found to be substantially more stable than the Z-isomer. Four possible conformers c′Cc, c′Tc, t′Cc, t′Tc, of which the first two are most stable, have been identified in the S₀ and S₁ states. Electronic excitation to S₁ state is accompanied with a reversal in the relative stability of the c′Cc and c′Tc conformers and a substantial reduction in the rotational barrier between them, as compared with the S₀ state. Optimized geometries of these conformers in the S₀ and S₁ states are being reported. Based on suitably scaled RHF/6-31G^** and DFT/6-311G^** calculations, assignments have been provided to the fundamental vibrational bands of both these conformers in terms of frequency, form and intensity of vibrations and potential energy distribution across the symmetry coordinates in the S₀ state. A complete interpretation of the electronic spectra of the conformers has been provided.     

A Sensitive Spectrophotometric Determination of Nitrite in Water and Soil

A highly sensitive spectrophotometric method for the determination of nitrite in water and soil has been developed. The reaction of nitrite with acidified potassium iodide to liberate iodine which oxidizes leuco‐crystal violet (LCV) to form crystal violet having absorption maxima at 590 nm forms the bases of this method. In aqueous medium the system obeys Beer's law in the range of 0.1 to 1.0 μg per 25 mL (0.004–0.04 ppm), while in an extractive system the range is 0.025–0.25 μg in 100 mL (0.00025–0.0025 ppm). The molar absorptivity and Sandell's sensitivity were found to be 1.54 × 10⁶ 1 mol^?1 cm^?1 and 44 pg cm^?2, respectively.     

Threonine-FX dosimeter for food irradiation

A detailed study for the spectrophotometric readout method for L-threonine powder, [CH₃CH(OH)CH(NH₂)COOH], was done. In this method, 400 mg unirradiated/irradiated L-threonine powder was dissolved in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.7×10⁻⁴ mol dm⁻³ xylenol orange (XO) in aerated aqueous 0.17 mol dm⁻³ sulphuric acid (FX). The peroxy radicals produced from irradiated threonine oxidize ferrous ions and XO forms a complex with ferric ions as well as controls the chain length of ferrous ion oxidation. The plot of absorbance at 556 nm against dose is linear in the dose range 20–400 Gy and doses down to about 1 Gy can be measured using 10-cm path cells. Response of the dosimeter is independent of irradiation temperature above 20. A dose of 50 Gy–10 kGy can be measured dissolving 50 mg threonine powder in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.3×10⁻⁴ mol dm⁻³ XO in aerated aqueous 0.06 mol dm⁻³ sulphuric acid (FX). The plot of absorbance at 552 nm against dose is non-linear. However dosimeter shows linear dose response up to 1000 Gy. Irradiated threonine powder is stable for about 3 months. The reproducibility of the method is better than ±2%. This dosimeter is very useful as transfer dosimeter for food irradiation programme.     

Optimization of experimental parameters in single-drop microextraction-gas chromatography-mass spectrometry for the determination of periodate by the Malaprade reaction, and its application to ethylene glycol

The aim of present work was to optimize the experimental parameters in single drop microextraction under solution immersion (SDME) and headspace (HS-SDME) extraction modes for the determination of periodate using guaifenesine [3-(2′-methoxyphenoxy)-1,2-propane diol] and norephedrine (phenylpropanolamine) as new and alternative reagents for the Malaprade reaction. The reactions were complete within 5 min resulting in the formation of 2-(2′-methoxyphenoxy)-acetaldehyde and benzaldehyde, respectively. SDME/HS-SDME of oxidation products with 2 μl of anisole or 1 μl of toluene, respectively, has permitted the determination of periodate at μg l⁻¹ concentration levels. The results indicated that HS-SDME (range 0.01-10 mg l⁻¹, r² = 0.9990; limit of detection 1.55 μg l⁻¹) was more sensitive than SDME (range 0.05-50 mg l⁻¹, r² = 0.9984; limit of detection 3.42 μg l⁻¹), and was inexpensive, rapid and convenient. Tolerance of excess of iodate has permitted the application of this method in the determination of ethylene glycol in motor oil; the average recovery on spiked sample was 98.6% with R.S.D. of 4.2%.     

High-performance thin layer chromatography method for quantitative determination of four major anthraquinone derivatives in Rheum emodi

A high-performance thin layer chromatographic (HPTLC) method for the rapid and simple quantification of the four major anthraquinone derivatives i.e. physcion, chrysophanol, emodin and chrysophanol glycoside in Rheum emodi is described. HPTLC of anthraquinone derivatives was performed on pre-coated RP-18 F254S HPTLC plates. For achieving good separation, the mobile phase of methanol-water-formic acid (80:19:1, v/v/v) was used. The densitometric determination of anthraquinone derivatives was carried out at 445 nm in reflection/absorption mode. The calibration curves were linear in the range of 20-100 ng for physcion, 80-400 ng for chrysophanol and emodin, and 200-1000 ng for chrysophanol glycoside. The method was found to be reproducible and convenient for quantitative analysis of anthraquinone derivatives in the methanolic extract of rhizomes of R. emodi collected from three different locations of Western Himalaya, India.     

2,5-Dihydroxyacetophenone oxime as an analytical reagent for the amperometric determination of copper,palladium, and nickel

Summary Copper, palladium and nickel can be titrated amperometrically with 2,5-dihydroxyacetophenone oxime at –0.15, –0.4 and, –1.2 V vs. S. C. E. respectively, the optimum p_H values being 4.6, 4.0, and 9.0. Alkali and alkaline earth metals, Al, Bi, Cd, Co, Cr. Fe(II), Hg, Mn, Ni, Pb, Th, Zn, UO, W, and Zr do not interfere with the estimation of copper and palladium. The interferences due to the presence of silver and iron(III) can be eliminated by adding excess of KCl and KF respectively. Most heavy metals interfere with the estimation of nickel and should be eliminated before titration.

---

Zusammenfassung Kupfer, Palladium und Nickel können mit 2,5-Dihydroxyaeetophenonoxim bei –0,15, –0,4 bzw. –1,2 V gegen eine gesättigte Kalomelelektrode amperometrisch titriert werden, wobei man das p_H am besten auf 4,6, 4,0 bzw. 9,0 hält. Alkalimetalle, Erdalkalien, Al, Bi, Cd, Co, Cr, Fe(II), Hg, Mn, Ni, Pb, Th, Zn, UO₂, W und Zr stören die Bestimmung des Kupfers und des Palladiums. Silber und Eisen können mit Kaliumchlorid gefällt bzw. mit Kaliumfluorid maskiert werden. Die meisten Schwermetalle stören die Nickelbestimmung und müssen daher vor der Titration entfernt werden.