Speciation of 30 % tri-n-butyl phosphate solvent during extraction of nitric acid

Several solutions of 30 % TBP/n-dodecane were equilibrated with different concentrations of aqueous nitric acid solutions at 298.15 K at a phase ratio of unity. The resultant equilibrated aqueous and organic solutions were analyzed for acidity. A three-solvate model with molecular HNO₃ based mechanism was assumed for nitric acid extraction by TBP. With nonlinear chemometric methods, the coefficients were evaluated. With the set of optimized coefficients, derived on the basis of experiments reported in this work, the estimated solvate species and free-TBP species in the TBP containing organic phase were found to be in good agreement with the reported concentrations in the literature.     

Investigation of the reaction mechanism and kinetics of production of anhydrous sodium metaborate (NaBO2) by a solid-state reaction

In this study, the solid-state reaction mechanism and kinetics were investigated for production of anhydrous sodium metaborate (NaBO₂), an industrially and technologically important boron compound. To assess the kinetics of solid-state production of NaBO₂, the chemical reaction between borax (Na₂B₄O₇) and sodium hydroxide (NaOH) was investigated by use of the thermal analysis techniques thermogravimetry (TG) and differential thermal analysis (DTA). DTA curves obtained under non-isothermal conditions at different heating rates (5, 10 and 20 °C/min), revealed five endothermic peaks corresponding to five solid-state reactions occurring at 70, 130, 295, 463, and 595 °C. The stages of the solid-state reaction used for production NaBO₂ were also analyzed by XRD, which showed that at 70 and 130 °C, Na₂B₄O₇ and NaOH particles contacted between the grains, and diffusion was initiated at the interface. However, there was not yet any observable formation of NaBO₂. Formation of NaBO₂ was initiated and sustained from 295 to 463 °C, and then completed at 595 °C; the product was anhydrous NaBO₂. Activation energies (E _a) of the solid-state reactions were calculated from the weight loss based on the Arrhenius model; it was found that in the initial stages of the solid-state reaction E _a values were lower than in the last three steps.     

Head group specificity of novel functionalized surfactants: synthesis,self-assembly and calcium tolerance

The present work describes the synthesis, characterization and application of functionalized surfactants derived through simple organic reaction steps. These surfactants have been particularly tailor made to resist hardness due to calcium ions in water. It is unique of its kind because here the surfactants have an analogous hydrophobic chain but differ structurally in the composition of the head groups in terms of the position of attachment of the chain. The effect of this small variability in the head group on the surfactant property, adsorption, self assembly and calcium tolerance behaviour has been studied in detail. This kind of phenol–keto surfactants has not been reported before. It was also found that one of the surfactants was more tolerant towards Ca²⁺ ion than the other. The individual packing behaviour of the surfactants at the air–water interface has been projected to cause this difference which is very interesting.     

Synthesis of nanometric β-barium metaborate powder from different borate solutions by ultrasound-assisted precipitation

In this study, the synthesis of barium metaborate powder (BaB₂O₄) was carried out by ultrasound-assisted precipitation using different borate solutions. Different solutions such as borax (Na₂B₄O₇, BD), boric acid (H₃BO₃, BA), and sodium metaborate (NaBO₂, SMB) were used in the synthesis and an ultrasonic immersion horn probe was used as the major source of ultrasound. The effect of reaction temperature and time, pH, and crystallization time on the BaB₂O₄ yield (%) was investigated. The ultrasound-assisted synthesis up to 90 % yield could be achieved using a 0.2 M BD solution at 80 °C, reacting for 5 min at pH 13 followed by 2 h of crystallization. Following crystallization, the obtained powder was heated up to 140, 250, 650, and 750 °C for 2.5 h, and it was shown that β-BaB₂O₄ nanometric powders were obtained after the 750 °C heat treatment.     

Propagation of sound pulses in a semiinfinite stratified medium

We consider the propagation of sound pulses due to a line source in the inhomogeneous, semi-infinite mediumy ≥ 0 with the boundary conditionφ=0 or?φ/(?y)=0 aty=0, whereφ is the acoustic velocity potential. We suppose that the velocity of wave propagation,c, is given byc ^?2=p ?qe ^?ay , wherep, q, α are real and positive andp>q. The method of dual integral transformation is used. The solution in terms of pulse propagation modes yields the diffracted pulse and the method of steepest descents gives the geometrical acoustic field.     

Diffraction of sound pulses by a rigid cylinder in an inhomogeneous medium

We consider the problem of scattering of two-dimensional sound pulses by a rigid circular cylinder embedded in a cylindrically stratified inhomogeneous medium. The line source is parallel to the axis of the cylinder. It is assumed that the velocity of soundc is given byc ^?1=pr ^q, wherep andq are real constants andp>0. The method of dual integral transformation developed by Friedlander is used. The solution in terms of pulse propagation modes gives the diffracted pulse and the method of steepest descents yields the geometrical acoustic field.     

The Molecular-Kinetic Approach to Hydrolysis of Boron Hydrides for Hydrogen Production

Kinetics and Catalysis - In this study, Langmuir–Hinshelwood and Michaelis–Menten kinetic models are applied to describe the kinetic behaviour of the Co–B catalyst in the...     

Self-focusing of Hermite–Gaussian laser beams in plasma under plasma density ramp

Self-focusing of Hermite–Gaussian laser beams in plasma under plasma density ramp has been investigated. It is known that a laser beam shows an oscillatory self-focusing and defocusing behavior with the propagation distance. To overcome the defocusing, localized upward plasma density ramp is introduced, so that the laser beam attains a minimum spot size and maintains it with only a mild ripple. The density ramp could be important for the self-focusing of a Hermite–Gaussian laser by choosing the laser and plasma parameters appropriately. Self-focusing becomes stronger as the propagation distance increases. The behavior of beam-width parameters with the distance of propagation is presented graphically.