Novel solid-phase extraction and preconcentration technique coupled with ICP-AES for the determination of Cr(III), Ni(II), and Zn(II) in various water samples

Newly synthesized 2-propylpiperidine-1-carbodithioate (2-PPC) was used for the extraction of Cr(III), Ni(II), and Zn(II) from various water samples. In the present investigation, the use of a syringe loaded with sorbent for the separation and enrichment of Cr(III), Ni(II), and Zn(II) prior to their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) was proposed to substitute the batch and column techniques. The described method was compared with the column technique with respect to fastness, simplicity, recovery, and risk of contamination. The syringe was loaded with 1.0 g of sorbent in order to retain the analyte elements. Next, 7.0 mL of sample solution (pH 5.0 ± 0.2) was drawn into the syringe in 15 s and discharged over 15 s. Then, an eluent (3.0 M HCl) was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cr(III), Ni(II), and Zn(II) were in the range of 94.50 to 99.62% with a standard deviation (S.D.) of 0.03%. The elements could be concentrated by drawing and discharging several portions of sample successively and eluting only one time. The detailed study of various interferences proved the method to be highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied to the determination of Cr(III), Ni(II), and Zn(II) in spiked and natural water samples. The results obtained are in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Nonfactorization and the decaysD s +→φπ +,φρ + andφl + ν l

Using the experimentally measured values ofx=A ₂(0)/A ₁(0) andy=V(0)/A ₁(0) and the measured ratiosR _st=Γ(D _s ⁺ →φl ⁺ ν _l)/Γ(D _ins ⁺ →φπ ⁺) andR _h=Γ(D _s ⁺ →φρ ⁺)/Γ(D _s ⁺ →φπ ⁺), we present evidence for significant nonfactorization contribution in the decay amplitude forD _s ⁺ →φπ ⁺. We analyze the role of nonfactorization inD _s ⁺ →φρ ⁺ and conclude that present data onR _h are consistent with factorization inD _s ⁺ →φρ ⁺. A measurement of polarization inD _s ⁺ →φρ ⁺ would greatly assist our analysis.     

Molecular constants of substituted ethylene-type molecules: IV. Inertia defects and rotational constants of vinyl halides and their deuterated derivatives

The inertia defects of some vinyl halides and their deuterated derivatives have been calculated on the basis of the general formulation developed by Oka and Morino. The initial sets of Urey-Bradley force constants, based on published data, were adjusted by a least squares procedure until they reproduced the fundamental vibrational frequencies satisfactorily. The Coriolis coupling constants which satisfy the sum rules derived were evaluated and used to calculate the inertia defect in the ground vibrational state. The theoretical values of the inertia defect are used to determine the rotational constant A which cannot otherwise be accurately determined from an “a” type transition.     

On a new partitioning of the Hamiltonian in many-body calculation of pair-correlation energies in closed-shell systems

We introduce here a new partitioning of the Hamiltonian in calculating pair-correlation energies using many-body perturbation theory, by which we are able to eliminate the off-diagonal particle–hole (p–h) ladders exactly to all orders in the perturbation expansion. In this formulation, the particle states turn out to be different for each distinct pair of hole states in the correlation energy calculation. We have also included the contributions of the diagonal particle–particle (p–p) and hole–hole ladders exactly to all orders. The effect of the off-diagonal p–p ladders has been estimated for each pair by computing the third-, foruth- and fifth-order energies. For highly symmetric systems the present partitioning yields in general symmetry-broken orbitals. Here one may use an average kind of partitioning for all the partners of the degenerate sets, which restores the symmetry and at the same time ensures cancellation of the p–h ladders exactly at the lowest order and approximately at the higher orders. Results are presented for a selection of 6π-electron conjugated systems. The correlation energy for each pair is in excellent agreement with that obtained from a partial CI calculation involving all double excitations from this pair. The advantages of implementing the present scheme in larger systems has been discussed.     

Adsorptive stripping voltammetric analysis of 2,4,6-tri(2′pyridyl)-1,3,5-triazine at a mercury electrode

The redox behaviour of adsorbed species of 2,4,6-tri(2-pyridyl)-1,3-5-triazine (TPTZ) at the surface of a mercury electrode was examined using cycling voltammetry. Based on the adsorption and accumulation of TPTZ at the charged mercury surface cathodic adsorptive stripping voltammetry (CSV) is applied for the trace determination of TPTZ using a differential pulse (DP) technique. Experimental and operational parameters for the quantitative analysis of TPTZ are optimized and the detection limit was found to be 3×10^–9 mol/l. The effect of some interferences, e.g. organic compounds, cations and anions, are investigated.     

A simple and green procedure for the conjugate addition of thiols to conjugated alkenes employing polyethylene glycol (PEG) as an efficient recyclable medium

Polyethylene glycol (PEG) is found to be an inexpensive, nontoxic, environmentally friendly reaction medium for the conjugate addition of thiols to conjugated alkenes to afford the corresponding adducts in excellent yields under mild and neutral conditions. Products of undesirable side reactions resulting from polymerization are not observed. The use of PEG avoids the use of either acid or base catalysts for this conversion and moreover PEG can be recovered and reused.     

Biologically active compounds through catalysis: efficient synthesis of N-(heteroarylcarbonyl)-N'-(arylalkyl)piperazines

A practical route for the synthesis of new biologically active 5-HT(2 A) receptor antagonists has been developed. In only three catalytic steps, this class of central nervous system (CNS) active compounds can be synthesized efficiently with high diversity. As the initial step, an anti-Markovnikov addition of amines to styrenes provides an easy route to N-(arylalkyl)piperazines, which constitute the core structure of the active molecules. Here, base-catalyzed hydroamination reactions of styrenes with benzylated piperazine proceeded in high yield even at room temperature. After catalytic debenzylation, the free amines were successfully carbonylated with different aromatic and heteroaromatic halides and carbon monoxide to yield the desired compounds in good to excellent yields. The two key reactions, base-catalyzed hydroamination of styrenes and palladium-catalyzed aminocarbonylation of haloarenes/heterocycles, showed tolerance towards various functional groups, thereby demonstrating the potential to synthesize a wide variety of new derivatives of this promising class of pharmaceuticals.     

Synthetische Versuche in der Gruppe hypotensiv wirksamer Alkaloide, 13. Mitt.: Synthese vondl-10-Methyldeserpidin,dl-10-Äthoxydeserpidin unddl-10-Methylmercapto-deserpidin

Zusammenfassung Die durch Umsetzung von 5-Methyltryptamin, 5-Äthoxytryptamin und 5-Methylmercapto-tryptamin (I, R=CH₃, OC₂H₅ bzw. SCH₃) mit dem racemischen Aldehyd-Ester II entstandenenSchiffschen Basen wurden durch Natriumborhydrid-Reduktion in Methanol unter gleichzeitiger Cyclisierung und Desacetylierung in die entsprechenden 10-substituiertendl-Methyl-2,3-seco-3-oxodeserpidate (IV) übergeführt. Die bei der Einwirkung von 3,4,5-Trimethoxybenzoylchlorid in Pyridin erhaltenen Ester V wurden weiter mit Phosphoroxychlorid cyclisiert und die Produkte als Perchlorate (VI) mit Zink in sauerer Lösung zu den entsprechenden 10-substituiertendl-Deserpidinen (VII, R=CH₃, OC₂H₅ bzw. SCH₃) reduziert. Mit Hilfe der Chromatographie gelang es in zwei Fällen, aus den Rohprodukten auch die entsprechendendl-3-Isodeserpidine (VIII, R=CH₃ bzw. OC₂H₅) zu isolieren. Zum Unterscheiden der Produkte der normalen Reihe (VII) und der 3-Iso-Reihe (VIII) wurden IR-Spektren und die Papierchromatographie angewendet.Mit 2 Abbildungen     

Determination of lead concentration and lead isotope ratios in calcium supplements by inductively coupled plasma mass spectrometry after high pressure, high temperature digestion

The presence of lead as a contaminant in calcium supplements has aroused considerable public health interest in recent years. In this investigation lead and lead isotope ratios were determined by ICP-MS in ten brands of calcium supplements after high pressure/temperature digestion. Calcium supplements (200 to 250 mg) were digested in 2 mL of nitric acid at 230?°C and at a pressure of 1770 psi (1.2 × 10⁴ kPa). Lead concentrations were determined by matrix-matched lead standards prepared in a high-purity calcium carbonate matrix. Good recoveries of lead and calcium were obtained for certified animal bone reference material. High levels of Pb (8 to 28 μg Pb per g of calcium) were found in calcium supplements that contain dolomite or bone meal. Chelated and refined calcium supplements had lower Pb levels (0.8 to 0.9 μg Pb/g Ca). Application of lead isotope ratios to distinguish the origin of calcium sources was also explored.