荧光猝灭法测定痕量六价铬

基于六价铬与碘化钾反应生产了单质碘，碘可以使2′，7′－二氯荧光素（DCF）发生荧光猝来，从而间接测定六价铬。六价铬浓度在0．20－2．50μg/25ml范围内，荧光强度差值与六价铬浓度呈线性关系，线性回归方程△F=12．12 0．19，相关系数r=0.9993，检出限为0．10μg/ml。方法简便，灵敏度较高，已用于合成样中六价铬的测定。回收率在100％－103％，结果满意。     

K/Ru(10ī0)表面上的CO-4a1轨道对称性确定

用同步辐射角分辨偏振紫外光电子谱对Ｋ／Ｒｕ（１０１０）面上吸附分子轨道的对称性测量发现：结合能在１１、．２ｅＶ的ＣＯ－４ａ１（４σ）分子轨道对ｓ偏振光（在沿〈１２１０〉的人射面）是禁戒的。结果表明由于Ｋ的强烈影响,ＣＯ的分子轨道重新排列（ｓＰ＾２杂化）。依据选择定则和分子轨道的对称性６说明,ｓｐ＾２再杂化的ＣＯ分子吸附的桥位取向是〈１２１０〉晶向。     

TEOS-MTES基SiO2溶胶微结构的SAXS研究

正硅酸乙酯(TEOS)为前驱体,在碱性条件下制备含有无定形SiO2颗粒的溶胶,以甲基三乙氧基硅烷(MTES)在酸性条件下获得聚甲基硅氧链,二者混合后应用同步辐射X射线进行混合溶胶的SAXS散射强度测定,计算了溶胶的平均回转半径、平均粒径、两相界面层厚度、散射体体积分数、两相间比表面积等参数,辅以光子相关光谱法(PCS)和透射电子显微镜(TEM)观测溶胶粒度,证实SiO2颗粒被MTES混合物连接成族团.实验发现所测混合溶胶样品均表现出对Porod定理的负偏离,说明溶胶中颗粒与溶剂之间存在很明显的两相间界面层.     

聚酰亚胺中空纤维膜用于甲醇/甲基叔丁基醚的分离

甲醇／甲基叔丁基醚混合物的膜法分离，大多采用渗透汽化方法，少有采用蒸汽渗透法。用聚酰亚胺中空纤维膜，对以蒸汽渗透和渗透汽化两种方式分离甲醇／甲基叔丁基醚混合物（甲醇质量分数为0．01－0．30）的效果进行了对比。结果显示，在甲醇质量分数低于0．05时，蒸汽渗透较渗透汽化法的分离性能优越。     

新显色剂噻二唑偶氮二甲氨基苯甲酸与铜(Ⅱ)显色反应的研究和应用

本文研究了噻二唑偶氮二甲氨基苯甲酸与Cu(Ⅱ)显色反应条件,确定在pH3.0～4.5范围形成蓝紫色络合物,组成比为1:1,摩尔吸光系数ε=4.55×10~4L·mol~(-1)·cm~(-1),1gβ=7.32。应用拟定的方法测定天然水中微量铜,获得满意的结果。     

电渗流与缓冲液浓度之间数学关系的线性表达

It was believed that electroosmotic mobility μeo is inversely proportional to the square root of the ionic strength L But the linear relationship for regression analysis was expressed differently in different papers. The paper studied the linear expression of the mathematical relationship between μeo and c （background buffer concentration） by mathematical transform and real experimental data.μeo values of fused silica capillary were determined in four buffer systems. Their experimental conditions were controlled carefully for decreasing temperature difference AT and pH difference ApH in 50 μm ID capillary, in which no double layer overlap existed. The linear relationship between the reciprocal of electroosmotic mobility and the square root of concentration （or ionic strength） was derived by mathematical method. The regression analysis of experimental data was shown to well correspond to the relationship. The constants in regression equation could be well defined and the calculated results were acceptable.     

Synthesis and characterization of ionic organotin compounds [R2SnCl2(2-quin)](HNEt3) and crystal structures of [(2,4-Cl2-C6H3CH2)2SnCl2(2-quin)](HNEt3)

Eight ionic organotin compounds [R₂SnCl₂(2-quin)]⁻(HNEt₃)⁺ have been synthesized by reactions of 2-quinH with R₂SnCl₂ (R = PhCH₂1, 2-Cl-C₆H₄CH₂2, 4-Cl-C₆H₄CH₂3, 2-F-C₆H₄CH₂4, 4-F-C₆H₄CH₂5, 4-CN-C₆H₄CH₂6, Ph 7, 2,4-Cl₂-C₆H₃CH₂8) in the presence of organic base NEt₃, and their structures have been characterized by elemental analysis, IR and multinuclear NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopies. The structure of [(2,4-Cl₂-C₆H₃CH₂)₂SnCl₂(2-quin)]⁻(NEt₃)⁺ (8) has been determined by X-ray diffraction study. Studies show that compound 8 has a monomeric structure with the central tin atom six-coordinate in a distorted octahedral configuration and the nitrogen atoms of the 2-quin ligands are coordinating to the tin atom in all the eight compounds.     

Tris（2,2＇-bipyridyl） Ruthenium（Ⅱ） Doped Silica Film Modified Indium Tin Oxide Electrode and Its Electrochemiluminescent Properties

An approach was reported to synthesize silica hybridized ruthenium bipyridyl complex through amidation reaction by covalent attachment of bis（bipyridyl）-4,4＇-dicarboxy-2,2＇-bipyridyl-ruthenium to （3-aminopropyl）-triethoxysilane. The hybrid complex then was gelatinized through acid catalytic hydrolysis method and a sol-gel modified indium tin oxide electrode was prepared via spin coating technique. As prepared indium tin oxide electrode possesses good stability therein with excellent electrochemiluminescence behavior.     

Fabrication of poly(dimethylsiloxane) microfluidic system based on masters directly printed with an office laser printer

Applications of poly(dimethylsiloxane) (PDMS)-based microfluidic systems are more popular nowadays. Previous fabrication methods of the masters for PDMS microchannels require complicated steps and/or special device. In this paper, we demonstrated that the toner printed on the transparency film with the office laser printer (1200 dpi) can be used as the positive relief of the masters. The transparency film was printed in two steps in order to obtain the same printing quality for the crossed lines. With the laser-printed master, the depth of the fabricated PDMS microchannels was ca. 10 microm and the smallest width was ca. 60 microm. Surface characteristics of the PDMS/PDMS microchannels were performed with SEM. Their electrokinetic properties were investigated by the aids of the measurement of electroosmotic flow (EOF) and the Ohm's curve. Using the PDMS/PDMS microchip CE systems, electroactive biological molecules and non-electroactive inorganic ions were well separated, respectively. This simple approach could make it easy to carry out the studies of PDMS microfluidic systems in more general labs without special devices.     

Comparison of the structures of an atomic three-valence-electron system with a nuclear three-valence-neutron system

A comparison has been made between the states of a 3-valence-electron system and a 3-valence-neutron system. The fermions are supposed to move in a sphere. The structures and internal motions of the head-states (the lowest of a given^2S+1 L ) of these systems havingL=0,S=1/2 and 3/2, and even and odd parity have been investigated. We have found that the symmetry governing the particular quantum system plays an essential role. In particular, all the nodal surfaces in the head-states originate from symmetry but not from dynamics. Consequently, the head-states of different dynamic systems have similar structures and similar internal motions.