Über einige Fraktionierungen laugenlöslicher Anteile von Kunstfaser-Zellstoffen

Zusammenfassung Aus Fichten- und Buchen-Kunstfaserzellstoffen wurden -und -Cellulosen präparativ hergestellt und diese polymeranalog nitriert. Die entstandenen Nitrate wurden durch Behandeln mit Aceton in einen löslichen und unlöslichen Teil getrennt, die gewichtsmäßig bestimmt wurden. Die acetonlöslichen Nitratanteile wurden aus den Acetonlösungen durch steigende Wasserzusätze fraktioniert gefällt und die Fraktionen gewichtsmäßig bestimmt; weiters wurden die reduzierten Viskositäten der Fraktionen bestimmt. Während die Stickstoffgehalte der acetonlöslichen Nitratanteile etwa jenen von Cellulosenitraten entsprechen, betragen die Stickstoffwerte der acetonunlöslichen nur etwa die Hälfte bis ein Drittel davon. In den acetonlöslichen Anteilen liegen im wesentlichen Hexosane vor. Die höchsten Fraktionen der -Cellulosen enthalten Anteile bis annähernd etwa DP 200. Im Gegensatz dazu bestehen die acetonunlöslichen Nitratanteile von - und -Cellulosen hauptsächlich aus Mischungen von Nitraten von Pentosanen und Polyuronsäuren. Die Acetonlöslichkeit von Nitraten laugenlöslicher Anteile aus Kunstfaserzellstoffen gibt demnach orientierende Hinweise auf die chemische Zusammensetzung dieser Anteile.Herrn Prof. Dr.A. Wacek zum 60. Geburtstag gewidmet.Die vorliegenden Untersuchungen wurden bereits in den Jahren 1952 und 1953 durchgeführt.     

Matrixreaktion von GaF mit o-atomen: ir-spektrum von OGaF

It is possible to synthesize OGaF in an argon matrix by co-condensation of GaF with O atoms. The stretching vibrations of this compound are found at 943 and 690 cm⁻¹ (¹⁶O⁶⁹GaF). An exact calculation of the force field is possible with the aid of the observed ¹⁶O/¹⁸O and ⁶⁹Ga/⁷¹Ga shifts. The following force constants are found: f(GaO) = 6.32; f(GaF) = 4.69; f(GaO/GaF) = −0.1 [10²Nm⁻¹]     

Ligand exchange reactions of ferrocene with phenanthrene or 9,10-dimethylphenanthrene in the presence of aluminum chloride and aluminum

Ligand exchange reactions between phenanthrene or 9,10-dimethylphenanthrene with ferrocene effected in the presence of AlCl₃-Al were carried out under a variety of conditions. With phenanthrene (I), hydrogenation at the C-9 and C-10 positions could take place during the reaction and the cationic products obtained were the η⁶-phenanthrene-η⁵-cyclopentadienyliron and η⁶-9,10-dihydro-phenanthrene-η⁵-cyclopentadienyliron moncations (II and III), and the η⁶-phenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron and η⁶-9,10-dihydrophenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron dications (IV and V). With 9,10-dimethylphenanthrene (VI), reactions carried out in refluxing cyclohexane gave the non-hydrogenated η⁶-9,10-dimethylphenanthrene-η⁵-cyclopentadienyliron monocation (VII) and η⁶-9,10-dimethylphenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron dication (VIII). When higher temperatures were used in an attempt to promote hydrogenation, decomposition predominated and no cationic product could be obtained. These finding are discussed and contrasted with previous results obtained from similar reactions using anthracene or 9,10-dimethylanthracene.     

Reproducibility of glass open tubular columns in a production environment — Two years of experience

Summary The problems associated with the preparation of glass open tubular (capillary) columns are well documented in the literature. These problems are even more evident if column production is done on a routine basis, in a production environment. On the other hand, from the point of the user who wants to rely on a supplier, the reproducible quality of the columns is crucial. Here quality does not only mean efficiency but also refers to the reproducibility of the average liquid film thickness (capacity ratio) and the relative retention, as well as the tube treatment influencing the polarity of the column tube. In a paper published one year ago [1] our investigation concerning the reproducibility of the column manufacturing process was reported. The present paper continues this investigation. Four different columns will be considered: two types of OV-101 columns with thin and thick liquid film as well as columns prepared with Carbowax 20M and DEGS liquid phases. The consistency of their characteristics and efficiency will be investigated. Column characteristics include the capacity ratio which is directly related to the thickness of the liquid phase film. Column efficiency is investigated with help of the HETP and peak resolution. The effective and theoretical plate numbers are compared and the incorrectness of the assumption that the former is better suited for column testing is demonstrated. Relative retention reproducibility of even difficult peak pairs shows the consistency of column wall treatment. Finally, the consistency and performance of shorter columns obtained by the breaking of long columns will be discussed.Paper presented at the Second International Symposium on Glass Capillary Chromatography, Hindelang, Allgäu, Federal Republic of Germany, May 2–6, 1977.     

The preparation of hot-pressed chalcogenide spinels. II. Stoichiometry and optical transparency in CdCr2S4 and CoCr2S4

The compounds CdCr₂S₄ and CoCr₂S₄ have been hot pressed into disks that are highly transparent in the infrared. Stoichiometry has been altered by varying the $\text{Cr}{}^{\mathrm{3+}}\text{M}{}^{\mathrm{2+}}$ ratio, where M²⁺ is Cd²⁺ or Co²⁺. The effects of nonstoichiometry on optical transmission were determined. Excess M²⁺ attenuates the transmission much more than excess Cr³⁺.     

Phenolic resins for solid-phase peptide synthesis: Copolymerization of styrene and p-acetoxystyrene

Details are given of the synthesis and purification of p-acetoxystyrene and its solution and suspension copolymerization with styrene. Reactivity ratios, evaluated by the Tidwell-Mortimer method, were r₁ (p-acetoxystyrene) = 1.18, and r₂ (styrene) = 0.88 for (bulk) solution copolymerization. Corresponding values of the reactivity ratios for suspension copolymerization were, within experimental error, indistinguishable from unity. Thus the copolymer composition is governed simply by the monomer feed composition. Use of a specially designed reactor vessel permits convenient suspension copolymerization of styrene, p-acetoxystyrene, and divinylbenzene to give crosslinked resins having comparatively narrow particle size distributions. Acetoxy groups in the crosslinked resin are cleaved by hydrazine hydrate under very mild conditions to give crosslinked polystyrenes having phenolic groups which, in turn, provide a useful alternative to the more usual chloromethylated polystyrene resins for solid-phase peptide synthesis.     

The light-induced conversion of triphenylamine to the excited triplet state of 11,12-dihydrocarbazole

A new transient in the photocyclization reaction of diphenylamines to carbazoles has been detected. It absorbs at 430 nm and is assigned to the excited triplet state of the intermediate photoproduct 11,12-dihydrocarbazole.     

Triazine chemistry VIII. 2,5-dihydro-5-oxo-1,2,4-triazines

2,5-Dihydro-5-oxo-1,2,4-triazine and some of its alkylated derivatives have been prepared. Nmr spectroscopic analysis has established that the 2,5-dihydro-5-oxo tautomers are preferred over the 4,5-dihydro-5-oxo ones. This preference, and the behavior of 1,2,4-triazines in some other chemical reactions has been interpreted in terms of electron-electron repulsions between the lone pairs of electrons of N₁ and N₂ in this ring system.     

Methodische Hinweise und Fehlerm?glichkeiten bei der Untersuchung membranfiltrierter w?\riger L?sungen

Zusammenfassung Es wird auf eine bisher nicht beachtete Fehlermöglichkeit bei der analytischen Untersuchung und Weiterverwendung von membranfiltrierten Lösungen hingewiesen. Die üblichen Membranfilter enthalten zur Hydrophilisierung bestimmte Mengen anionaktiver Tenside, die sich nur in wechselndem Ausma\e vor dem Gebrauch eluieren lassen. Bei der Untersuchung von membranfiltrierten Flu\-, Grund- und Trinkwasserproben findet man dadurch zu hohe Tensidkonzentrationen und bei der Austestung und Verwendung sterilfiltrierter Wirkstofflösungen u. a. können betrÄchtliche Störungen eintreten. Von Fall zu Fall ist darum eine sorgfÄltige Versuchskontrolle hinsichtlich einer spezifischen Tensidwirkung nötig.

---

Summary Reference is made to a source of error so far unknown in analytical examinations of aqueous membrane-filtered solutions. Membrane filters usually contain a certain amount of anionic surface-active substances for hydrophilizing purposes. These substances are only partly eliminated before the use of the filter. Therefore, in samples of membrane-filtered river, underground and tap water concentrations are found higher than the actual detergent content. There may also be interferences with the testing of bio-active substances, for instance of antibiotics. Advice is given to control carefully the possible specific effect of surface-active substances during these experiments.

     

Synthese und Konfiguration von Methylestern der diastereomeren (±)-3-Amino-2,3-diarylpropansäuren,der (±)-3-Amino-2,3-diarylpropanole und ihrer Derivate

Zusammenfassung Durch Umsetzung von Hydramiden mit am aromatischen Ring m,p-dialkoxysubstituierten Arylessigsäureestern in Gegenwart von wasserfr. AlCl₃ entstehen Gemische aus Estern der (±)-erythro- und (±)-threo-3-Amino-2,3-diarylpropansäuren. Bei der Umsetzung von Piperonalhydramid mit dem Methylester der Homoveratrumsäure konnte lediglich daserythro-Diastereomere isoliert werden.Die diastereomeren Ester wurden zu den jeweiligen (±)-erythro- und (±)-threo-3-Amino-2,3-diaryl-1-propanolen reduziert, die als N,O-Dibenzoylderivate charakterisiert wurden. Ihre relativen Konfigurationen und die der zugehörigen Ester wurden auf Grund der IR-Spektren der diastereomeren Aminopropanole bestimmt. Die NMR-Spektren eines Diastereomerenpaares von Aminopropanolen bestätigen die ihnen chemisch zugeordneten Konfigurationen und ermöglichen den Nachweis auch ihrer bevorzugten Konformationen.

---

Synthesis and configuration of methyl esters of the diastereomeric (±)-3-amino-2,3-diarylpropanoic acids, the (±)-3-amino-2,3-diaryl-1-propanols and their derivatives

Reaction of hydramides with m,p-dialkoxysubstituted arylacetates in the presence of anhydrous AlCl₃ generally leads to mixtures of the esters of the (±)-erythro- and (±)-threo-3-amino-2,3-diarylpropanoic acids. However, in the reaction of piperonal hydramide with methyl homoveratrate, only the correspondingerythro-diastereomer was obtained.Reduction of the diastereomeric esters gives the corresponding (±)-erythro- and (±)-threo-3-amino-2,3-diaryl-1-propanols, which can be characterized as N,O-dibenzoyl derivatives. Relative configurations of both alcohols and esters were determined by means of their IR spectra. Configurations were confirmed for one pair of diastereomeric amino alcohols by means of NMR spectra and preferred conformations deduced.