Complexation of dimethylmagnesium with alpha-diimines; structural and EPR characterisation of single electron and alkyl transfer products

Treatment of dimethylmagnesium with the alpha-diimine ligands Ar'N=C(R)C(R)=NAr' [R = naphth-1,8-diyl (1), H (2), CH3 (3); Ar' = 2,6-diisopropylphenyl] in diethyl ether provides the neutral methyl-bridged dimeric complexes [(alpha-diimine-.)Mg+(mu-CH3)]2 via single electron transfer (SET) to the coordinated diimine and elimination of a methyl radical. These biradical species have been characterised by EPR spectroscopy and, for the ligand , X-ray crystallography. In the presence of THF the reaction of ligand proceeds to the diamagnetic [(ene-1,2-diamide)Mg(THF)3] complex in which the diimine ligand has been doubly reduced to an ene-diamide by two successive SET processes. Comparison of the structural data for the free ligand with that obtained for the alpha-diimine radical anion and ene-diamide complexes shows the expected increases in C-N, and decreases in C-C, bond lengths within the N-C-C-N unit consistent with the progressive reduction of the ligand. In the case of ligand , reaction at low temperature provides the complex [Mg(mu2-Me){Ar'NC(Me)2C(Me)NAr'}]2 in which methyl transfer to a ligand imine carbon atom has occurred. This species has also been structurally characterised. This contrasts with the formation of the radical species at room temperature, and indicates the involvement of an intermediate in which the radical products of the SET process are held in close proximity by the solvent cage. Two competing processes of methyl radical escape and methyl transfer to the ligand account for the formation of the observed products at different temperatures.     

Targeting large phosp(III)azane macrocyles [{P(mu-NR)}(2)(LL)](n) (n> or = 2)

The condensation reactions of the dimer [ClP(micro-NR)](2) with organic diacids [LL(H)(2)], possessing linear orientations of their organic groups, result in the formation of phospha(III)zane macrocyles of the type [{P(mu-NR)}(2)(LL)](n) of various sizes. The series of macrocycles [{P(mu-N(t)Bu)}(2){1,5-(NH)(2)C(10)H(6)}](3), [{P(mu-NCy)}(2)(1,5-O(2)C(10)H(6))](n) [n = 3; n = 4], [{P(mu-N(t)Bu)}(2){1,4-(NH)(2)C(6)H(4)}](4), [{P(mu-N(t)Bu)}(2)(1,4-O(2)C(6)H(4))], [{P(mu-NCy)}(2)(1,4-O(2)C(6)H(4))](3) and [{P(mu-N(t)Bu)}(2){(NH)C(6)H(4)OC(6)H(4)(NH)}](2) can be related to classical organic frameworks, like calixarenes.     

A methodology for investigating new nonprecious metal catalysts for PEM fuel cells

This paper reports an approach to investigate metal-chalcogen materials as catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane (PEM) fuel cells. The methodology is illustrated with reference to Co-Se thin films prepared by magnetron sputtering onto a glassy-carbon substrate. Scanning Auger microscopy (SAM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) have been used, in parallel with electrochemical activity and stability measurements, to assess how the electrochemical performance relates to chemical composition. It is shown that Co-Se thin films with varying Se are active for oxygen reduction, although the open circuit potential (OCP) is lower than for Pt. A kinetically controlled process is observed in the potential range 0.5-0.7 V (vs reversible hydrogen electrode) for the thin-film catalysts studied. An initial exposure of the thin-film samples to an acid environment served as a pretreatment, which modified surface composition prior to activity measurements with the rotating disk electrode (RDE) method. Based on the SAM characterization before and after electrochemical tests, all surfaces demonstrating activity are dominated by chalcogen. XRD shows that the thin films have nanocrystalline character that is based on a Co(1-x)Se phase. Parallel studies on Co-Se powder supported on XC72R carbon show comparable OCP, Tafel region, and structural phase as for the thin-film model catalysts. A comparison for ORR activity has also been made between this Co-Se powder and a commercial Pt catalyst.     

A new technique to examine individual pollutant particle and fibre deposition and transit behaviour in live mouse trachea

During respiration, particles suspended in the air are inhaled and unless cleared by airway defences they can remain and affect lung health. Their size precludes the use of standard imaging modalities so we have developed synchrotron phase-contrast X-ray imaging (PCXI) methods to non-invasively monitor the behaviour of individual particles in live mouse airways. In this study we used these techniques to examine post-deposition particle behaviour in the trachea. PCXI was used to monitor the deposition and subsequent behaviour of particles of quarry dust and lead ore; fibres of asbestos and fibreglass; and hollow glass micro-spheres. Visibility was examined in vitro and ex vivo to avoid the complicating effects of surrounding tissue and respiratory or cardiac motion. Particle behaviour was then examined after deposition onto the tracheal airway surfaces of live mice. Each particle and fibre looked and behaved differently on the airway surface. Particles lodged on the airway shortly after deposition, and the rate at which this occurred was dependent on the particle type and size. After the live-imaging experiments, excised airway samples were examined using light and electron microscopy. Evidence of particle capture into the airway surface fluids and the epithelial cell layer was found. PCXI is a valuable tool for examining post-deposition particulate behaviour in the tracheal airway. These first indications that the interaction between airways and individual particles may depend on the particle type and size should provide a novel approach to studying the early effects of respired particles on airway health.     

A statistical theory of orientational ordering at the free surface of a liquid of ellipsoidal molecules

The surface tension γ of a system of ellipsoidal molecules is evaluated approximately using a generalized Fowler-Kirkwood-Buff model. The pair potential is modelled as u(r/σ) where r is the centre of mass distance and σ is an angle dependent range parameter determined by the shape anisotropy of the molecule. It is shown that if the pair correlation function g scales as g(r/σ) γ can be mapped onto the value for a system of spheres, multiplied by an angular integral which takes into account approximately both the anisotropic molecular shape as well as possible orientational order. It is shown that γ is lowered when the orientational order parameter Q ≠ 0, implying that isotropic molecular liquids may be partially ordered near the free surface. The surface favours parallel ordering of rod-like particles in a direction in the plane of the surface. For plate-like particles, ordering with the plates in the plane of the surface is favoured. In both cases the anchoring energies increase sharply with the shape anisotropy of the molecule. These results are qualitatively consistent with the surface properties of non-polar nematic liquid crystals.     

Glass forming region and physical properties in the system P2O5-Na2O–Fe2O3

The glass forming region of the system P₂O₅–Na₂O–Fe₂O₃ was determined, using phosphate salts as precursor materials. The glasses were produced in non-wetting gold/platinum crucibles in order to avoid contamination. Glass formation was confirmed using XRD and the final composition determined using EDX. The glass forming region was found to be relatively short at 50% P₂O₅ content in comparison to both lower and higher P₂O₅ content. As expected, the inclusion of Fe₂O₃ had a significant effect on both glass transition temperature and density with a peak seen at around 30 mol% Fe₂O₃. This coincides with previously reported abrupt structural changes in the glass. The inclusion of Na₂O has little effect on the glass transition temperature but causes a small increase in density.     

EBC-232 and 323: A Structural Conundrum Necessitating Unification of Five In Silico Prediction and Elucidation Methods

Structurally unique halimanes EBC-232 and EBC-323, isolated from the Australian rainforest plant Croton insularis, proved considerably difficult to elucidate. The two diastereomers, which consist an unusual oxo-6,7-spiro ring system fused to a dihydrofuran, were solved by unification and consultation of five in silico NMR elucidation and prediction methods [i.e., ACDLabs, olefin strain energy (OSE), DP4, DU8+ and TD DFT CD]. Structure elucidation challenges of this nature are prime test case examples for empowering future AI learning in structure elucidation.     

Development of candidate reference materials for the measurement of lead in bone

The production of modest quantities of candidate bone lead (Pb) reference materials is described, and an optimized production procedure is presented. The reference materials were developed to enable an assessment of the interlaboratory agreement of laboratories measuring Pb in bone; method validation; and for calibration of solid sampling techniques such as laser ablation ICP-MS. Long bones obtained from Pb-dosed and undosed animals were selected to produce four different pools of a candidate powdered bone reference material. The Pb concentrations of these pools reflect both environmental and occupational exposure levels in humans. The animal bones were harvested post mortem, cleaned, defatted, and broken into pieces using the brittle fracture technique at liquid nitrogen temperature. The bone pieces were then ground in a knife mill to produce fragments of 2-mm size. These were further ground in an ultra-centrifugal mill, resulting in finely powdered bone material that was homogenized and then sampled-scooped into vials. Testing for contamination and homogeneity was performed via instrumental methods of analysis.