Fabricating tunable nanoparticle density gradients with the contact printing based approach

Recently, the generation of spatial gradient nanoparticle assemblies has attracted much attention. Such assemblies can be intriguing templates for building novel molecular architectures, and be employed as a combinatorial tool for quick determination of interaction selectivity for nanoparticles. In this communication, we report on convenient contact printing based techniques for generating lateral gradients containing nanoparticles with tunable geometry, scale and steepness. In the first method, octadecyltrichlorosilane (OTS) gradient surfaces were generated via the contact printing approach, and then spaces un-occupied by OTS molecules were back-filled with an amine-terminated silane, which allows the grafting of nanoparticles that were surface functionalized with carboxylic acid. By varying the size and geometry of the stamp, different geometrical gradients were generated. In addition, by changing the stamping procedures, either well-defined stepwise gradients or continuous gradients can be achieved. Furthermore, the contact printing based technique can be utilized in combination with diffusion of the aminosilane molecules to directly create its gradient, and consequently a nanoparticle density gradient.     

In Situ Observation of Skeletal Shape Transition during BaB2O4 Crystal Growth in High-Temperature Solution

The transition from a fiat solid-liquid interface to a skeletal shape during BaB2O4 （BBO） single crystal growth in Li2B4O7 flux is observed in real time by an optical high-temperature in-situ observation system. The movement of crystal step is also investigated. The observation results demonstrate that the steps propagate along and parallel to the fiat interface when the crystal size is small. Nevertheless, they will ‘bend＇ close to the face centre if the crystal size becomes greater. Atomic force microscopy reveals that more deposition places near the face centre give rise to the bending of advancing steps and thus the formation of a vicinal interface structure. Measurements of step velocity show that the velocity keeps nearly constant at different moments for one specific step, whereas the step on a newly formed layer advanced faster than that on a previously formed one when the crystal size is larger than 210μm or so. Thus interracial morphological instability occurs and a skeletal interface is obtained.     

A STUDY OF J-INTEGRAL OF THE ORTHOTROPIC COMPOSITE MATERIAL

ＡＳＴＵＤＹＯＦＪ－ＩＮＴＥＧＲＡＬＯＦＴＨＥＯＲＴＨＯＴＲＯＰＩＣＣＯＭＰＯＳＩＴＥＭＡＴＥＲＩＡＬＷａｎｇＡｉ－ｑｉｎ（王蔼勤）；ＦｅｎｇＢａｏ－ｌｉａｎ（冯宝莲）；ＹａｎｇＷｅｉ－ｙａｎｇ（杨维阳）（ＴａｉｙｕａｎＨｅａｖｙＭａｃｈｉｎｅｒｙ．...     

(NH4)2MoS4在活性炭上浸渍过程的研究:Ⅱ.干燥机理及模型

（ＮＨ＿４）＿２ＭｏＳ＿４在活性炭上浸渍过程的研究Ⅱ．干燥机理及模型秦慧芳，张成芳，陆岗，俞丰，朱子彬（华东理工大学无机化工研究所，上海２００２３７）２３７）关键词硫代钼酸铵，活性炭，干燥，钼分布，干燥模型负载型催化剂的活性组分在载体上的分布，受浸渍...     

溅射功率对多层膜质量的影响

用磁控溅射技术制备薄膜，用X射线衍射研究在基片和靶间距离固定的情况下不同的溅射功率对薄膜结构的影响。结果表明：过低的溅射功率下淀积的薄膜有畸变的X射线衍射特征峰，特征峰强度小，半峰全宽大。而比较高溅射功率得到的薄膜有比较尖锐的X射线衍射特征峰，强度高和半峰全宽非常窄。研究表明，X射线衍射特征峰强度小和半峰全宽大的薄膜结构疏松，而强度高和半峰全宽非常窄的薄膜结构致密。     

1，4－二氟四苯基苯的合成、结构与构象

借助电子转移催化反应的方法，用电子给予体１，４－二锂四苯基丁二烯将惰性的三溴氟甲烷活化，并与之发生反应，产物１，４－二氟四苯基苯的结构经ＭＳ、ＮＭＲ和Ｘ射线单晶衍射确证，并以分子力学的方法对其进行了构象分析。     

分析非轴对称腔的复光线数值迭代法

将像散光束的复光线表示法用于分析非轴对称腔，并对有复杂像散的折迭腔作了数值迭代计算以说明方法的应用．     

Mössbauer effect of iron-57 intercalated in layered compound 2H−Fe0.5TaSe2

⁵⁷Fe Mössbauer effect study has been performed on intercalated compound 2H?Fe_0.5TaSe₂ over a temperature range between 14K and 500K. The highly concentrated intercalation samples 2H?Fe_xTaSe₂ with Fe atoms (x up to 2) are prepared by the electrochemical method for the first time. The Mössbauer measurement shows that iron is in Fe³⁺ high spin state and with the same probability occupies both octahedral and tetrahedral interstices of the Van der Waals gap. The fact that effective masses of iron ions in both sites are close to 57 amu and characteristic temperatures (Θ_M =130K, 107K respectively) are found to be relatively small is attributed to the weak forces on Fe³⁺.     

复制受限的环境演算中模态逻辑的内涵性

环境演算(MA)的模态逻辑AL进行了研究．在考虑了复制操作和限制操作的情况下，提出了逻辑等价的协归纳操作描述，并利用协归纳关系与进程结构同余关系进行比较，证明了若对MA加上约束条件得到子集MAIF^syn，此时逻辑等价(=L)与结构同余关系是等价的，即AL在MAIF^syn中是内涵的．同时发现由于复制操作的存在，AL的内涵性受到了影响，使得AL的区分能力被削弱，但通过对复制公式的构造验证了AL的表达能力．     

架起传统与现代的桥梁--建筑历史与理论课程体系教学改革的思考

重新审视建筑历史理论教学的目标、内容、教学方式和手段，通过对国内几座有影响的建筑院校的调研，比较各个院校在这些问题及途径上的异同，分析其利弊，以期促进建筑历史与理论课程体系教学的建设和改革．