Alpha and deuteron induced reactions on vanadium

The stacked foil technique was used in combination with γ-ray spectroscopy to obtain excitation functions for the production of different nuclei using natural vanadium as target and 85 MeV α-particles and 46.5 MeV deuterons as projectiles. The data are compared with theoretical predictions provided by an equilibrium and pre-equilibrium reaction model. In most cases the theoretical predictions seriously under-estimated the measured cross sections.     

Synthesis of 4- and 6-methyl derivatives of 5,7-dioxo(4h,6h)-1,3-dithiolo[4,5-d]pyrimidine based on methylbarbituric acids,spectroscopic characteristics and acidity constants

We have obtained previously unknown 1-methyl- and 1,3-dimethyl-5-diethylaminothiocarbonylthiobarbituric acids by reaction of sodium diethyldithiocarbamate with 5-phenyliodonium betaines of 1-methyl- and 1,3-dimethylbarbituric acids. Cyclization of these compounds upon heating in conc. H₂SO₄ gives methyl-substituted 5,7-dioxo(4H,6H)-1,3-dithiolo[4,5-d]pyrimidine-2-diethylimmonium hydrosulfates; the derivative of 1-methylbarbituric acid forms a mixture of 4-methyl- and 6-methyl-substituted compounds (21). We isolated perchlorates of 4-methyl- and 4,6-dimethyl-substituted derivatives in pure form. By treatment of the immonium salt with sodium sulfide or selenide, we obtained 4-methyl- and 4,6-dimethyl-5,7-dioxo(4H,6H)-1,3-dithiolo[4,5-d]pyrimidine-2-thiones and 4-methyl-, 6-methyl-, and 4,6-dimethyl-2-selenones. We characterized the isomeric 4- and 6-methyl-substituted selenones by electronic absorption spectra and ionization constants (7.65 and 4.0). The differences in the pK values and in the electronic absorption spectra makes it possible to distinguish the substitution site in N-mono-substituted derivatives of 5,7-dioxo(4H,6H)-1,3-dithiolo[4,5-d]pyrimidine.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1526–1533, November, 1993.     

31P-NMR-Untersuchung an PhPH(CO)6Fe2(PPh)3Fe2(CO)6PPhH ? einem Vierkernkomplex mit einer ungewöhnlichen (PPh)3-Brücke

(CO)₆Fe₂(PhPH)₂ bildet mit PhPCl₂ den phosphidoverbrückten tetranuklearen Komplex [PhPHFe₂(CO)₆PPh]₂PPh. ³¹P{¹H}-NMR-Spektren der Titelverbindung werden als [AB]₂C-Systeme analysiert, Stereoisomere werden diskutiert. ³¹P-NMR Studies on PhPH(CO)₆Fe₂(PPh)₃Fe₂(CO)₆PPhH ? a Tetranuclear Complex with an Unusual (PPh)₃ Bridge (CO)₆Fe₂(PhPH)₂ and PhPCl₂ form [PhPHFe₂(CO)₆PPh]₂PPh, a tetranuclear complex with phosphido bridges. ³¹P{¹H}-NMR spectra are analysed as [AB]₂C systems, stereoisomers are discussed.     

Chemical ionization mass spectrometry of nitrosamines

The mass spectra of eight nitrosamines have been recorded, with excitation by chemical ionization (CI) and electron impact (EI). Comparison of the intensities of the base peaks under CI and El conditions gives intensity ratios in the range 1.4-1.9 for low resolution measurements and up to 10 for high resolution measurements, confirming the enhanced sensitivity available in the CI mode.     

Modification chimique des polyalcadiènes par les composés du type CX3Z—I Addition catalysée des composés CCl3Z sur les polybutadiènes-1,2

The influence of catalysis on chemical modification of 1,2-polybutadienes (M_n < 10,000) by CX₃Z reagents (X = halogen; Z = functional group or halogen), in order to obtain polymers soluble in common solvents, has been studied. The work has been carried out with carbon tetrachloride, trichloromethylphosphonyldichloride (CCl₃POCl₂) and ethyl trichloroacetate (CCl₃CO₂Et) in the presence of solvents such as C₆H₆, CH₂Cl₂. Among the compounds tested as catalysts for the addition of CX₃Z to 1,2-polybutadiene (transition metal salts and complexes; radical initiators) only the systems formed with metal salts such as CuCl₂, FeCl₃, RuCl₃ 3H₂O, Fe₂(CO)₉ and Cl₂Ru(PPh₃)₃ were found to show high catalytic activity. The most active is Cl₂Ru(PPh₃)₃: used without or with cocatalysts (Et₃NHCl/benzôin, alcohols), it leads always, to the best yields whatever the nature of CX₃Z. The activity of the other catalysts is generally dependent on CX₃Z structure. Some secondary reactions (cross-linking, cyclization, transesterification) have been found.     

Use of reference pools to compare the qualitative and quantitative determination of polychlorinated biphenyls by packed and capillary gas chromatography with electron capture detection. Part 1. Serum

Serum for reference pools of in vivo polychlorinated biphenyls (PCBs) was obtained from four goats that had received one dose (100 mg kg-1) of a selected technical Aroclor (AR) (1016, 1242, 1254 or 1260) and were allowed to recover for 30 d. These pools were used to assess the differences in an analytical method that determines and quantifies PCBs using packed-column gas chromatography (PCGC) (quantified on the basis of mean mass percent. data for grouped PCB peaks) and capillary-column gas chromatography (CCGC) (quantified on the basis of percent. composition data for specific congeners). With CCGC, results were statistically significantly different (p less than or equal to 0.0002) from results with PCGC for ARs 1016, 1242 and 1254 but not for AR 1260 (p = 0.23). When comparing these gas chromatographic methods using bovine serum spiked in vitro with the same ARs at 17-25 p.p.b., it was found that the methods were not statistically significantly different for any of the ARs (p = 0.30-0.92). Levels of serum PCB determined by the two methods for 12 persons, divided into two groups according to exposure, were compared using the paired t-test. Group 1 consisted of three persons with dietary and/or environmental exposure; one with dietary and/or environmental exposure in addition to occupational exposure dating back 20 years. Group 2 consisted of eight persons with recent occupational exposure.(ABSTRACT TRUNCATED AT 250 WORDS)     

Variable step molecular dynamics: An exploratory technique for peptides with fixed geometry

A new algorithm is presented for performing molecular dynamics simulations of peptides with fixed geometry, with the aim of simulating conformational changes and of exploring conformational space. The principle of the method is to expand the potential energy as a Taylor's series in the coordinates around the current point, retaining the force and its first two derivatives, and obtain a series solution of the resulting differential equations using a method due to Lyapunov. By choosing the time step so that the second term in the series is small compared to the first, the true solution can in principle be approximated to any desired degree of accuracy. The algorithm has been used to solve numerically Lagrange's equations of motion for N-acetyl alanine amide and N-acetyl methionide amide, regarded as fixed at their C-termini, under the influence of the ECEPP/2 potential energy function, and time steps of 15–30 fsec have been achieved with little variation in the total energy. Possible directions for future development are discussed.     

Persulphate initiated polymerisation of methacrylamide—I: Kinetics and molecular weight dependences

A kinetic study of the aqueous persulphate initiated polymerisation of methacrylamide has shown that the rate of polymerisation is represented by the equation $\text{R}{}_{\mathrm{p}}\text{= k [}\text{M}\text{] [}\text{I}\text{]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ where the overall rate constant, $\text{k = 1.3 × 10}{}^9\text{exp}\text{(?18,400/}\text{RT}\text{) 1}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{mol}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}\text{s}{}^{\mathrm{?1}}$. Chain transfer with monomer, where C_M = 5.4 × 10^?3 at 60°, is shown to be the dominant transfer step. Comparison with kinetic studies of the analogous acrylamide polymerisation shed doubt on the ‘cage effect’ interpretation of complex orders with respect to monomer. An alternative explanation is proposed.     

Application of ESCA to polymer chemistry. VIII. Surface structures of AB block copolymers of polydimethylsiloxane and polystyrene

The surface morphology of a number of films of AB block copolymers of polydimethylsiloxane and polystyrene was examined by ESCA and contact angle measurements. In all cases the immediate surface is shown to consist of an essentially pure polydimethylsiloxane component. By comparing the intensities of elastic peaks corresponding to photoionizations from core levels without energy loss for polydimethylsiloxane and polystyrene with those for the block copolymers and by consideration of shake-up phenomena specific to the polystyrene component, an estimate of the thickness of the polydimethylsiloxane outer layer of the latter may be obtained. This is shown to vary between ～13 and 40 Å, depending on the method of formation of copolymer film.