Sampling procedure and a radio-indicator study of mercury determination in whole blood by using an AMA 254 atomic absorption spectrometer

A sampling procedure appropriate for the determination of mercury in whole blood was tested by using both inactive controls and a ¹⁹⁷Hg mercury radio-indicator. To exclude the influence of the instrumental device (an AMA 254 single-purpose mercury atomic absorption spectrometer) on the determination of mercury in whole blood, the function of the instrument was checked by using rat blood with metabolised ¹⁹⁷Hg. The measurement procedure was found to be free of errors. However, the study showed that the material used for the sampling vessels is a crucial parameter for obtaining accurate analytical results. The stability of solutions and samples was tested towards polyethylene (PE) and polypropylene (PP) vessels. PE displayed a time-dependent increase in the mercury content both in the samples and in the blood control material. The probable cause of this increase was direct contamination from the material of the vessel and/or diffusion of mercury from the environment through the vessel walls related to a strong complexing affinity of the sample matrix. This assumption was confirmed by supplying the vessels with the complexing agent Na₂EDTA (0.05 mol L^–1). Commercial PP vessels for blood sampling (Sarstedt S-Monovette Metall Analytik) did not give rise to statistically significant variations in mercury content in the samples and blood control material over a 30-day period.     

Comparison of three sequential extraction procedures (original and modified 3 steps BCR procedure) applied to sediments of different origin

The 3 steps sequential extraction procedure proposed by the Standards Measurements and Testing program (SM&T--formerly BCR) of the European Union has been applied for the speciation of metals in sediments. Results obtained by the application of the BCR standardized procedure were compared to those of two four step sequential extraction procedures, which are different from the BCR procedure only for the introduction of an additional step with NaOCl, as 2nd and 3rd step respectively. Five different metals have been taken into consideration: Cd, Cu, Ni, Pb and Zn. The analytical performances of the laboratory have been evaluated using three certified reference materials: the BCR 601 lake sediment for the BCR sequential extraction procedure, PACS-1 and MESS-1 for total metal concentration. Results showed that the efficiency of NaOCl treatment is higher or at least equal to that of H2O2 treatment and that its selectivity is quite satisfying. Moreover the NaOCl treatment doesn't significantly influence the extraction of the easily reducible fraction.     

Transition metal coordination polymers with polycarboxylic acid as bridging ligands: Synthesis and structure characterization of [Fe(μ4-bta)0.5(phen)(OH)]<Subscript>n</Subscript>

A new 2D (two-dimensional) coordination polymer, [Fe(μ4-bta)o.5(phen)(OH)]_n (1), has been hydrothermally synthesized with FeCl₃ 6H₂, Na₄bta (h₄bta = 1,2,4,5-benzentetracarboxylic acid), 1,10-phen (1,10-phenanthroline) and H₂O as raw materials. The crystals of the compound belong to monoclinic P2₁/n space group, a = 1.0129(2) nm, b = 0.9265(2) nm, c = 1.5696(3) nm, β=91.37(3)°V=1.4721(5) nm³,Z=3, final R₁=0.0292, wR ₂=0.0798 for 2572 [/>2σ(/)] observed reflections. The result of structure determination shows that in the compound each bta ligand is connected with four Fe³, forming a new μ4-coordination mode. Four deprotonated carboxylic groups of bta link to Fe³ ions alternatively through monodentate and bidentate coordination fashion, constructing 2D layer network. The measurement of variable temperature magnetic susceptibility indicates that there exist antiferromagnetic interactions between Fe³ ions in the compound. The TGA spectrum displays relatively fine thermal stability of the compound. In addition, IR and UV-Vis spectra of compound 1 have also been measured.     

Comparative study of the phenolic profile,antioxidant and antimicrobial activities of leaf extracts of five Juniperus L. (Cupressaceae) taxa growing in Turkey

Abstract

The purpose of this study was to conduct a comparative evaluation of some biological properties of methanol and water extracts of leaves of five Juniperus taxa growing in Turkey: J. communis L. var. communis (Jcc), J. communis L. var. saxatilis Pall. (Jcs), J. drupacea Labill. (Jd), J. oxycedrus L. subsp. oxycedrus (Joo), J. oxycedrus L. subsp. macrocarpa (Sibth. & Sm.) Ball. (Jom). The antioxidant properties were examined in vitro; both in the DPPH and in the reducing power tests, Joo methanol extract resulted the most active (IC₅₀?=?0.09?±?0.01mg/mL and ASE/mL?=?2.56?±?0.06). In the TBA assay, Jcs methanol extract exhibited the highest activity (IC₅₀?=?4.39?±?0.47?μg/mL). The extracts displayed bacteriostatic activity against Staphylococcus aureus, and Jd methanol extract resulted the most effective (MIC?=?19.53?μg/mL); no effect on the S. aureus biofilm formation was observed. The extracts resulted non-toxic in the Artemia salina lethality bioassay. Finally, the phenolic profile of the methanol extracts was characterized by HPLC-PDA/ESI-MS.     

Solid-state pH nanoelectrode based on polyaniline thin film electrodeposited onto ion-beam etched carbon fiber

An ultramicro pH sensor has been constructed based on a thin polyaniline film that was electrochemically deposited onto a carbon fiber nanometer-size electrode. The substrate nanoelectrodes were fabricated using ion-beam conically etched carbon fibers with tip diameters ranging ca. from 100 to 500 nm. The polyaniline film was deposited from HCl solution containing the aniline monomer by cycling the potential between −0.2 and +1.0 V. The electromotive force (emf) signal between the pH sensitive polyaniline-coated nanoelectrode and an Ag/AgCl reference electrode was linear over the pH range of 2.0-12.5 with a slightly super-Nernstian slope of ca. −60 mV/pH unit. Response times ranged from several sec at pHs around 7 up to 2 min at pH 12.5. The proposed pH nanoelectrode displayed high ion selectivity with respect to K⁺, Na⁺, Ca²⁺, and Li⁺, with log K_H,M values around −12 and has a working lifetime of about 20 days. Key parameters important for the pH nanoelectrode performance, including polyaniline film preparation, selectivity, response time, temperature dependence, relative coating thickness, stability, and reproducibility, have been characterized and optimized. The performance of the pH nanoelectrode was examined by measuring the pH of several real samples including body fluids (serum, urine) and low ionic strength water samples (rain, deionized and tap water). The results agreed very well with those obtained by using commercial glass pH electrodes. The proposed pH nanoelectrode demonstrated attractive properties and seems particularly promising for use under physiological conditions.     

Synthesis of a cyclic dinuclear organotin carboxylate via simultaneous debenzylation and decarbonylation reactions: X-ray crystal structure of [(PhCH2)2{O2CC6H4{N(H)N(C6H3-4(O)-5-O)}-o}Sn]2

The complex, [(PhCH₂)₂{O₂CC₆H₄{N(H)N(C₆H₃-4(O)-5-O)}-o}Sn]₂ (1), is obtained as the exclusive reaction product from the reaction of sodium 2-[(E)-2-(3-formyl-4-hydroxyphenyl)-1-diazenyl]benzoate and (PhCH₂)₃SnCl. The reaction possibly proceeds via Dakin type rearrangements where arylazosalicylaldehyde is oxidized to arylazocatechol, followed by facile Sn-C bond cleavage. Complete assignments were achieved by ¹H, ¹³C, 2D ¹H-¹¹⁹Sn HMQC (¹¹⁹Sn chemical shift), 1D gs ¹H-¹⁵N HMQC (¹J(¹⁵N, ¹H) coupling constant) NMR and ESI-MS. The crystal structure of compound 1 as determined by X-ray diffraction analyses shows a cyclic centrosymmetric dinuclear moiety linked into extended chains by pairs of long Sn?O contacts of approximately 3.2 Å. Two polymorphs were identified and their structures differ primarily in the packing arrangement afforded by the benzyl groups. In one polymorph, when viewed along the Sn?Sn vector, the benzyl groups at each Sn-atom are oriented to form an S-shape, while they form a U-shape in the second polymorph.     

Study of the carbonyl products of terpene/OH radical reactions: detection of the 2,4-DNPH derivatives by HPLC-MS

The oxidation of the terpenes - and -pinene, limonene and ³-carene by hydroxyl radicals has been investigated in a fast-flow reactor coupled to a liquid nitrogen trap for collecting the carbonyl compounds. Identification of the products was performed via 2,4-dinitrophenylhydrazone (DNPH) derivatization of the carbonyls to form the mono- and di-DNPH derivatives, which were analysed by high-performance liquid chromatographic (HPLC)-DAD (diode array detector) and HPLC-mass spectrometry (HPLC-MS). Both electrospray ionization [ESI(–)] and atmospheric pressure chemical ionization [APCI(–)] were suitable for the detection of the DNPH derivatives of formaldehyde, acetaldehyde, myrtanal, campholene aldehyde, perillaldehyde, acetone, nopinone, trans-4-hydroxynopinone and 4-acetyl-1-methylcyclohexene. Also the mono-DNPH derivatives of the dicarbonyl compounds pinonaldehyde, endolim and caronaldehyde could be identified. The MS² spectra generated in the ion trap of the mass spectrometer allowed us to distinguish between aldehydes and ketones on the basis of the characteristic fragment ion m/z 163 for the aldehydes. For the quantitative analysis of the mono-DNPH derivatives, ESI(–) in combination with single ion monitoring (SIM) detection showed the lowest detection limits. For the quantification of the dicarbonyl compounds, the acid-sensitive di-DNPH derivatives had to be formed by keeping the acidity in the acid-catalysed derivatization reaction at about 1.7 mM H₂SO₄. Detection of these dicarbonyl compounds can only be performed by APCI(–) with somewhat lesser sensitivity than by HPLC-DAD.     

<Emphasis Type="Italic">o</Emphasis>-Phenylenediamine as a New Catalyst in the Highly Regioselective Conversion of Epoxides to Halohydrins with Elemental Halogens

Summary. The regioselective ring opening of epoxides using elemental iodine and bromine in the presence of o-phenylenediamine as a new catalyst affords vicinal iodo alcohols and bromo alcohols in high yields. The major advantages of this method are versatility, high regioselectivity, a cheap and commercially available catalyst, mild and neutral reaction conditions, and short reaction times. Fourier transform Raman spectroscopy was used to study the reaction of iodine with o-phenylenediamine. The results indicate that the complex [(Diamine)I]⁺·I₅^– is formed, and we suggest that the major nucleophile is the pentaiodide ion. This bulky nucleophile has a fundamental role in the high regioselectivity observed attacking the less sterically hindered epoxide carbon.     

Dissociative recombination cross section and branching ratios of protonated dimethyl disulfide and N-methylacetamide

Dimethyl disulfide (DMDS) and N-methylacetamide are two first choice model systems that represent the disulfide bridge bonding and the peptide bonding in proteins. These molecules are therefore suitable for investigation of the mechanisms involved when proteins fragment under electron capture dissociation (ECD). The dissociative recombination cross sections for both protonated DMDS and protonated N-methylacetamide were determined at electron energies ranging from 0.001 to 0.3 eV. Also, the branching ratios at 0 eV center-of-mass collision energy were determined. The present results give support for the indirect mechanism of ECD, where free hydrogen atoms produced in the initial fragmentation step induce further decomposition. We suggest that both indirect and direct dissociations play a role in ECD.     

The Crystal Structure of Ba3Cu2Al2F16: a Relative of Ba4Cu2Al3F21

Ba₃Cu₂Al₂F₁₆ is monoclinic: a = 7.334(1)Å, b = 5.320(2)Å, c = 16.022(1)Å, β = 96.34(1)°, Z = 2. Its crystal structure was solved in the space group P2₁ (No. 4) from synchrotron X‐ray single crystal data using 2685 unique reflections (2639 with F_o/σ(F_o) > 4). The final R factor is 0.044. The structure consists of a succession along the c‐axis of the cell of three layers of two different kinds of sheets developing in the (a, b) plane. The first one, formulated [(AlF₅)₂]_∞^4— and hereafter named A, is built up from infinite cis‐chains of aluminium‐fluorine octahedra [AlF₆], linked by two vertices and distanced by a. The second one, formulated [Cu₂AlF₁₁]_∞^4— and named B, is bidimensional. It is constituted of distorted copper‐fluorine octahedra [CuF₆], linked by edges, which form infinite chains interconnected by three vertices of isolated [AlF₆] octahedra. The stacking sequence of the sheets is (A, B, B)_∞. The barium ions, 12‐coordinated, are inserted between the sheets. The crystal structure of Ba₃Cu₂Al₂F₁₆ is closely related to that of Ba₄Cu₂Al₃F₂₁. Only the proportion and the stacking sequence of the two kinds of sheets in the c‐direction differ, according to two different compositions and two different symmetries.