TsOH-SiO2 as an efficient and eco-friendly catalyst for Knoevenagel condensation

Tosic acid on silica gel (TsOH-SiO₂) was synthesized and characterized using microscopic and spectroscopic techniques such as powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and FT-IR spectroscopy. Thermal behaviour of the catalyst was investigated by differential scanning calorimetry (DSC) and thermogravimetric (TG) analysis. TsOH-SiO₂ showed excellent catalytic activity for the Knoevenagel condensation and was recyclable for six cycles.     

A new series of luminescent phosphine stabilised platinum ethynyl complexes

A series of cis-platinum ethynyl complexes with the general formula cis-[Pt(dppe)(C[triple bond]CR)2](dppe = 1,2-bis(diphenylphosphino)ethane; R = C6H4-p-NO2 1, C6H4-p-CH3 2, C6H4-p-C[triple bond]CH 3 and C6H4-p-C6H4-p-C[triple bond]CH 4) have been prepared by the coupling reaction of cis-[Pt(dppe)Cl2] with two equivalents of the appropriate alkyne. The new complexes have been fully characterized by spectroscopic techniques, and the cis square planar arrangement at the platinum centre has been confirmed by single-crystal X-ray diffraction studies of complexes 1, 2 and 4. The absorption spectra of the complexes 1-4 are dominated by a pi-->pi* band that contains some platinum (n + 1) p orbital character. The position of the band is dependent on the electron donating or withdrawing properties of the ethynyl substituents, R. Complex 1 displays a triplet emission in the green, at room temperature, while complexes 2-4, display singlet emissions in the blue. Again, the difference can be attributed to the nature of the R substituents.     

Synthesis, characterisation and optical spectroscopy of platinum(II) di-ynes and poly-ynes incorporating condensed aromatic spacers in the backbone

A series of protected and terminal dialkynes with extended pi-conjugation through a condensed aromatic linker unit in the backbone, 1,4-bis(trimethylsilylethynyl)naphthalene, 1,4-bis(ethynyl)naphthalene, 9,10-bis(trimethylsilylethynyl)anthracene, 9,10-bis(ethynyl)anthracene, have been synthesized and characterized spectroscopically. The solid-state structures of and have been confirmed by single crystal X-ray diffraction studies. Reaction of two equivalents of the complex trans-[Ph(Et(3)P)(2)PtCl] with an equivalent of the terminal dialkynes 1,4-bis(ethynyl)benzene and, in (i)Pr(2)NH-CH(2)Cl(2), in the presence of CuI, at room temperature, afforded the platinum(II) di-ynes trans-[Ph(Et(3)P)(2)Pt-C[triple bond, length as m-dash]C-R-C[triple bond, length as m-dash]C-Pt(PEt(3))(2)Ph](R = benzene-1,4-diyl; naphthalene-1,4-diyl and anthracene-9,10-diyl ) while reactions between equimolar quantities of trans-[((n)Bu(3)P)(2)PtCl(2)] and under similar conditions readily afforded the platinum(II) poly-ynes trans-[-((n)Bu(3)P)(2)Pt-C[triple bond]C-R-C[triple bond]C-](n)(R = naphthalene-1,4-diyl and anthracene-9,10-diyl ). The Pt(II) diynes and poly-ynes have been characterized by analytical and spectroscopic methods, and the single crystal X-ray structures of and have been determined. These structures confirm the trans-square planar geometry at the platinum centres and the linear nature of the molecules. The di-ynes and poly-ynes are soluble in organic solvents and readily cast into thin films. Optical spectroscopic measurements reveal that the electron-rich naphthalene and anthracene spacers create strong donor-acceptor interactions between the Pt(II) centres and conjugated ligands along the rigid backbone of the organometallic polymers. Thermogravimetry shows that the di-ynes possess a somewhat higher thermal stability than the corresponding poly-ynes. Both the Pt(II) di-ynes and the poly-ynes exhibit increasing thermal stability along the series of spacers from phenylene through naphthalene to anthracene.     

Molecular characterisation of Bacillus chitinase for bioconversion of chitin waste

In this work chitin was extracted chemically from shrimp shells. Seventeen Bacillus isolates were screened for chitinolytic activity. The chitinolytic strains of Bt. were screened at different temperatures and pHs for their hydrolytic potentials. By using a pair of specific primers, endochitinase gene was amplified from SBS Bt-5 strain through PCR, and then cloned into pTZ57 TA cloning vector and transferred in Escherichia coli DH5α strain. The sequenced gene (GenBank Accession No: HE995800) consists of 2031 nucleotides capable of encoding 676 residues. The protein consisted of three functional domains with a calculated molecular mass of 74.53 kDa and a pI value of 5.83. The amino acid sequence of chi gene showed 99% similarity to the genes of Bt MR11 endochitinase, Bt serovar kurstaki chitinase (kchi), Bt strain MR21 endochitinase and Bacillus cereus B4264.     

On Jordan Triple Higher Derivable Mappings on Rings

Let R be a ring and \({\mathbb{N}}\) be the set of all non-negative integers. A family of maps \({D=\{d_n\}_{n \in\mathbb{N}}}\) is said to be Jordan triple higher derivable if \({d_n(aba)=\sum \nolimits_{p+q+r=n} d_p(a)d_q(b)d_r(a)}\) holds for all \({a,b \in R}\), where d ₀ = I _R , (the identity map on R). In this paper, we determine Jordan triple higher derivable map on a ring R, which contains a nontrivial idempotent which is automatically additive. An immediate application of our main result shows that every Jordan triple higher derivable map becomes higher derivation on R.     

Synthesis of pectin-N,N-dimethyl acrylamide hydrogel by gamma radiation and application in drug delivery (in vitro)

The objective of the work is to synthesize pectin-N, N-Dimethylacrylamide (DMAA) hydrogel by gamma radiation without using any initiators and cross-linking agents. Effect of radiation doses on gel fraction and equilibrium swelling as a function of pH were studied, and 5 kGy radiation dose was found to be the optimum dose for hydrogel synthesis. The grafting /crosslinking was investigated by Fourier transform infrared spectroscopy. Thermal properties and surface morphology were studied by differential scanning calorimetry and scanning electron microscopy. To study the drug release kinetics, 5-fluorouracil was loaded into the hydrogel and in vitro release was carried out in simulated gastric and intestinal fluid. The release profile of drug showed that more than 90% of the loaded drugs were released after 4 hours at both gastric fluid and intestinal fluid pH. Drug release data was fitted into zero order, Higuchi and Korsmeyer-Peppas kinetic models. Higuchi model was found to be the best fitted and release exponent ‘n’ value of Korsmeyer-Peppas model indicated the non-Fickian transport.     

Elemental fingerprint profile of beer samples constructed using 14 elements determined by inductively coupled plasma–mass spectrometry (ICP-MS): multivariation analysis and potential application to forensic sample comparison

Determination of elemental fingerprint profile of 40 commercial beer samples was performed using inductively coupled plasma–mass spectrometry combined with principal component analysis and receiver operating characteristic (ROC) analysis. Fourteen trace elements, ⁵¹V, ⁵²Cr, ⁵⁹Co, ⁶⁰Ni, ⁷⁵As, ⁸²Se, ⁹⁵Mo, ¹¹¹Cd, ¹¹⁵In, ¹²¹Sb, ¹³³Cs, ²⁰⁸Pb, ²⁰⁹Bi, and ²³⁸U, were monitored. All 40 beer samples are distinguishable by using the proposed method. ROC analysis showed that individual beer samples can be correctly identified via the magnitude of its correlation coefficient with respect to the other beers with low false positive rate. The obtained results suggested that the elemental fingerprint technique is feasible for sample differentiation and comparison.     

A multivariate quantification of Box‐Behnken design assisted method development and validation of dextromethorphan hydrobromide and desloratadine simultaneously by reverse‐phase HPLC in in‐house syrup formulation

An innovative high‐performance liquid chromatography assay method was developed and validated for quantification of dextromethorphan hydrobromide and desloratadine simultaneously in monophasic liquid formulation by preparing syrup containing 30 mg/5 mL of dextromethorphan hydrobromide and 1.2 mg/mL of desloratadine. The chromatographic severance was executed by gradient solution A and B. The composition of buffer solution A contained 0.05 M monobasic potassium, then 1 mL triethylamine was added to it and the pH was adjusted to 2.3 with orthophosphoric acid. Methanol was used as solution B. The gradient elution was executed with Kromasil C8 (250 mm × 4.6 mm) column having 1.5 mL/min flow rate and 20 µL injection volume with UV‐estimation at 254 nm for dextromethorphan hydrobromide and DES. The present research was planned according to Box‐Behnken design by utilizing design expert software, using four factors such as column temperature (A), flow rate (B), mobile phase–organic phase (C), and pH (D); correspondingly the selected response variables were resolution between A and B, that is, desloratadine and methyl paraben (Y1), tailing of dextromethorphan hydrobromide (Y2), and tailing of desloratadine (Y3). The parameters such as system suitability, linearity, accuracy, precision, robustness, limit of detection, limit of quantitation, and ruggedness were analyzed to validate the developed method in accordance with current regulatory guidelines.