Selective preparation of (E)-3-oxo-1-alkenylphosphonates by insertion of acyl chlorides and nitriles into zirconacycles

Zirconacycles 1, obtained from diethyl 1-alkynylphosphonates, insert either acyl chlorides or nitriles to provide, after acidic workup, (E)-3-oxo-1-alkenylphosphonates, 2, in isolated yields of 55-83%. Insertion produces only one regio- and stereoisomer. The reaction is quite general and proceeds well with both aliphatic and aromatic acyl chlorides. Acetonitrile and p-methoxybenzonitrile also inserted efficiently. Insertion of isobutyl chloroformate produced the vinylphosphonocarboxylate, 2c, the first representative of this class of compounds.     

不同助剂对CuO-ZnO/SBA-15催化CO_2加氢制甲醇性能影响的研究

以硅质骨架结构介孔分子筛SBA-15为载体,采用浸渍法合成CuO-ZnO/SBA-15(CZ/SBA-15)、CuO-ZnO-MnO_2/SBA-15(CZM/SBA-15)、CuO-ZnO-ZrO_2/SBA-15(CZZ/SBA-15)三组多孔催化剂,在固定床反应器上评价了各组催化剂催化CO_2加氢合成甲醇的性能,同时结合N_2吸附-脱附(BET)、X射线衍射(XRD)、H_2程序升温还原(H_2-TPR)、程序升温脱附(H_2-TPD、CO_2-TPD)、N_2O滴定、X射线光电子能谱(XPS)、透射电子显微镜(TEM)等表征研究了不同助剂对CO_2催化加氢制甲醇的影响。结果表明,催化剂中的金属氧化物改变了SBA-15分子筛载体的孔径大小和比表面积;催化剂CuO-ZnO-MnO_2/SBA-15、CuO-Zn O-ZrO_2/SBA-15中铜的分散度(D_(Cu))和比表面积(A_(Cu))更大,表面CuO粒径更小,更易被还原;相比Mn-O簇,Zr-O簇为增强了碱性位点,提高了甲醇选择性。此外,CuO-ZnO-ZrO_2/SBA-15具有更高的氧空位浓度,催化活性更好,其甲醇选择性为25.02%,与CuO-ZnO/SBA-15、CuO-ZnO-Mn O_2/SBA-15相比分别提高了28%和136.9%,催化效果最好。     

Novel monofunctional and bifunctional boronic acid‐functionalized squarylium dyes as precolumn and on‐column labels for protein analysis by capillary electrophoresis with laser‐induced fluorescence

This article presents a continuous capillary electrophoresis with laser‐induced fluorescence (CE‐LIF) following spectral studies of the noncovalent interactions between novel Squarylium Boronic Acid 4 (SQ‐BA4) & Squarylium Diboronic Acid 2 (SQ‐DBA2) squarylium dyes and human serum albumin (HSA). Two protocols were used wherein the on‐column‐labeling protocol was found to be more sensitive than the precolumn one by showing a better enhancement in the peak area of the HSA–dye complex besides lower limits of detection (LODs) for HSA. Also, stability studies were conducted with or without HSA using precolumn‐labeling mode over one week exhibiting the superiority of SQ‐BA4 to SQ‐DBA2. Then, a mixture containing three model proteins, HSA, β‐lactoglobulin B, and transferrin, was labeled on‐column with both dyes and completely resolved by CE‐LIF after optimization of several parameters. Both dyes provided lower LODs for HSA than those of β‐lactoglobulin B and transferrin with higher sensitivities. In addition, the SQ‐BA4 dye showed again greater sensitivities with all the three proteins than SQ‐DBA2.     

Characterization and catalytic performance of basaltic dust as an efficient catalyst in the liquid‐phase esterification of acetic acid with n‐butanol

Three natural basaltic samples were collected and used as efficient catalysts for the liquid‐phase synthesis of n‐butyl acetate. The samples were characterized by X‐ray fluorescence analysis (XRF), X‐ray diffraction (XRD), thermogravimetry (TG), differential thermal analysis (DTA), Fourier transform infrared (FT‐IR), scanning electron microscopy (SEM), and N₂ sorption. The acidity of the samples was determined using isopropanol dehydration, and the strength of the acid sites was measured using chemisorption of basic probes. The catalytic activity of the samples towards the esterification of acetic acid with n‐butanol was extensively examined. The influence of different parameters, such as the reaction refluxing time, molar ratio, catalyst loading, reusability, and calcination temperature, on the esterification reaction was studied in detail. The results revealed that all samples had high catalytic activity with a selectivity of 100% to n‐butyl acetate formation. In addition, the sample obtained from the top hill of Volcano had the highest activity with a 80% yield of n‐butyl acetate. Moreover, the significant catalytic performances were well correlated with the acidity of the samples and to the reaction rate constants.     

Effects of polyvinylpyrrolidone on structural and optical properties of willemite semiconductor nanoparticles by polymer thermal treatment method

Journal of Thermal Analysis and Calorimetry - Willemite is an inorganic semiconductor material used for optoelectronic applications. The present study purposes a new polymer thermal treatment...     

Studies on 3,5-diaminopyrazole derivatives

The behaviour of 3,5-diamino-4-phenylazopyrazole toward a variety of reagents is reported. Several new 3,5-diaminopyrazole derivatives as well as amino derivatives of fused pyrazoles have been prepared.

---

Untersuchungen an 3,5-Diaminopyrazol-Derivaten

Zusammenfassung Es wird über das Verhalten von 3,5-Diamino-4-phenylazopyrazol gegenüber verschiedenen Agentien berichtet. Es wurden sowohl einige neue 3,5-Diaminooyrazol-Derivate als auch einige Aminoderivate von kondensierten Pyrazolen dargestellt.

     

Biogenic Synthesis of Gold Nanoparticles on a Green Support as a Reusable Catalyst for the Hydrogenation of Nitroarene and Quinoline

Direct attachment of gold nanoparticles to a green support without the use of an external reducing agent and using it for removing toxic pollutants from wastewater, i. e., reduction of nitroarene to amine, are described. A novel approach involving the reduction of gold by the jute plant (Corchorus genus) stem-based (JPS) support itself to form nanoparticles (AuNPs) to be used as a catalytic system (‘dip-catalyst’) and its catalytic activity for the hydrogenation of series of nitroarenes in aqueous media are presented. AuNPs/JPS catalyst was characterized using SEM, UV-Vis, FTIR, TEM, XPS, and ICP-OES. Confined area elemental mapping exhibits uniform and homogeneous distribution of AuNPs on the support surface. TEM shows multi-faceted AuNPs in the range of 20–30 nm. The reactivity of AuNPs/JPS for the transfer hydrogenation of nitroarene as well as hydrogenation of quinoline under molecular H₂ pressure was evaluated. Sodium borohydride, when used as the hydrogen source, demonstrates a high catalytic efficiency in the transfer hydrogenation reduction of 4-nitrophenol (4-NP). Quinoline is quantitatively and chemoselectively hydrogenated to 1,2,3,4-tetrahydroquinoline (py-THQ) using molecular hydrogen. Reusability studies show that AuNPs are stable on the support surface and their selectivity is not affected.     

Adsorption of n-alkane vapours at the water surface

Monte Carlo simulations are reported here to predict the surface tension of the liquid-vapour interface of water upon adsorption of alkane vapours (methane to hexane). A decrease of the surface tension has been established from n-pentane. A correlation has been evidenced between the decrease of the surface tension and the absence of specific arrangement at the water surface for n-pentane and n-hexane. The thermodynamic stability of the adsorption layer and the absence of film for longer alkanes have been checked through the calculation of a potential of mean force. This complements the work recently published [Ghoufi et al., Phys. Chem. Chem. Phys., 2010, 12, 5203] concerning the adsorption of methane at the water surface. The decrease of the surface tension has been interpreted in terms of the degree of hydrogen bonding of water molecules at the liquid-vapour interface upon adsorption.     

Studies on the liquid-liquid extraction and precipitate flotation of the second kind of Co(II) using 8-hydroxy quinoline

Catalysis of mixed oxide LaMnO₃ was studied for the decomposition of hydrogen peroxide (H₂O₂). The catalyst was -irradiated in open petri dishes, vacuum, dry oxygen and moist oxygen. LaMnO₃ irradiated in moist oxygen showed highest catalytic activity. X-ray photoelectron spectroscopic (XPS) studies were carried out to investigate the surface modifications occurred during -irradiaiton of LaMnO₃. No significant change in the surface was noticed in LaMnO₃ irradiated in vacuum and dry oxygen. However, LaMnO₃ irradiated in moist oxygen and in open petri dishes showed the reduction of transition metal (MN³⁺ to Mn²⁺) which in turn leads to the formation of chemisorbed superoxide ions (O ₂ ^– ) and surface carbonate species (CO ₃ ^2– ). The latter processes decreases the electrical conductivity by trapping the charge carriers. The hydrated electron generated by the radiolysis of moisture reduces the transition metal. A qualitative molecular orbital model has been proposed for the chemisorption of O ₂ ^– on the reduced transition metal centers (Mn²⁺).