High-productivity continuous biofilm reactor for butanol production

Corn steep liquor (CSL), a byproduct of the corn wet-milling process, was used in an immobilized cell continuous biofilm reactor to replace the expensive P2 medium ingredients. The use of CSL resulted in the production of 6.29 g/L of total acetone-butanol-ethanol (ABE) as compared with 6.86 g/L in a control experiment. These studies were performed at a dilution rate of 0.32 h⁻¹. The productivities in the control and CSL experiment were 2.19 and 2.01 g/(L·h), respectively. Although the use of CSL resulted in a 10% decrease in productivity, it is viewed that its application would be economical compared to P2 medium. Hence, CSL may be used to replace the P2 medium. It was also demonstrated that inclusion of butyrate into the feed was beneficial to the butanol fermentation. A control experiment produced 4.77 g/L of total ABE, and the experiment with supplemented sodium butyrate produced 5.70 g/L of total ABE. The butanol concentration increased from 3.14 to 4.04 g/L. Inclusion of acetate in the feed medium of the immobilized cell biofilm reactor was not found to be beneficial for the ABE fermentation, as reported for the batch ABE fermentation. Names are necessary to report factually on available data. However, the USDA neither guarantees nor warrants the standard of the product, and the use of the names by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Determination of toxic elements in tea,leaves by instrumental neutron activation analysis

The concentration of certain toxic and essential elements in various brands of tea consumed locally were determined using instrumental neutron activation analysis. Transference of these elements into the drinkable portion was studied by brewing and boiling tea leaves for two minutes and the approximate intake was calculated from this data. The toxic effects of Hg, Se, As, Br and Sb are briefly discussed.     

Determination of trace elements in coffee beans and instant coffee of various origins by INAA

Summary Extensive use of coffee, by one-third of world's population, entails the evaluation of trace element contents in it. Instrumental neutron activation analysis (INAA) was successfully employed to determine the concentration of 20 trace elements (essential, toxic and nonessential) in four samples of coffee beans of various origins and two instant coffee brands most commonly consumed in Pakistan. This study provides the base-line values of certain toxic and essential elements in coffee. The daily intake of essential and toxic elements through coffee was estimated and compared with the recommended values. The cumulative intake of Mn is four times higher than the recommended value and that of toxic elements is well below the tolerance limits.     

Mass spectra of complexes of 8-quinolinol with trivalent metals (AL,Ga, In,Sc, Cr and Fe)

The main fragmentation of the compounds MX_3-nox_n (oxH=8-quinolinol. n = 3; M=AL, Ga, In, Sc, Cr or Fe. n = 2; M=In or Fe; X=Cl or Br. InIox₂. n = 1; M=AL, In or Fe; X= Cl or Br) involves loss of X and intact ox_. radicals. The comparative abundances of the fragments are primarily related to the common oxidation states of the metals. For example, all the Mox₃ compounds show the ions [Mox₃]⁺ and [Mox₂]⁺. The ions [Mox]⁺ and [M]⁺ are present when M=Ga, In, Cr or Fe but for the elements with only one oxidation state (Al or Sc) [M]⁺ is absent and [Mox]⁺ has only very low abundance. When M= Cr or Fe metal-containing ions arising from loss of species such as CO, H₂O, HX, C₂H₂, H and OH by fragmentation of the ox ligand are also present; this behaviour is rationalised in terms of the ability of these metals to undergo a unit change in oxidation state. When n=1 the ions [MXox₂]⁺ and [Mox₂]⁺ and when n= 2 the ions [MX₂ox]⁺ and [Mox₃]⁺ are present; these ions arise by ionization and fragmentation of species formed by redistribution reactions in the mass spectrometer.     

Time and temperature-based study for the production of high T C phase by sol-gel technique in Pb-bscco system

The high T_C superconducting phase Bi₂Sr₂Ca₂Cu₃Ox (2223) in the Pb-BSCCO system has been produced by EDTA-gel processing using nitrate solutions. The precursor has heated in two stages, at 300 and 800°C each for 2 h, to avoid the burning of the important species involved in the final product. The effects of time (6 to 48 h) and temperature (845 and 855°C) on the formation of the 2223 phase have been studied by sintering the samples in air. Thermal analysis (TG/DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and a vibrating sample magnetometer (VSM) have been employed to investigate the powder produced at different stages of decomposition, oxidation and formation of sintered materials from the powders. The volume-fraction of the 2223 phase at 845°C increases with time, the maximum value of the 2223 phase was obtained at 120 h. It has been observed that the formation of the high T_C phase is remarkably enhanced at the temperature of the endothermic peak of the DTA curve. The best result has been obtained in the sample sintered for 24 h at the temperature 855°C (endothermic peak). This also indicated that at 855°C, the large volume-fraction of 2223 phase with T_C 113 K grew in short time and as the sintering time increased, it decomposed into the Bi₂Sr₂CaCu₂Ox (2212) phase and other phases.     

Extraction studies of the group IB,IIB, and IIIA–VA elements using 1-(2-pyridylazo)-2-naphthol as chelating reagent

The extraction of PAN chelates of the group IB, IIB and IIIA–VA elements from aqueous solutions of pH 1–10 into chloroform has been studied radiochemically. Re-extraction studies have been made to strip the metal ions from the organic phase into aqueous solutions of KCN, HClO₄ and buffer solutions. The effects of certain masking agents on the extraction of these elements have also been studied. The extraction curves indicate the possibilities of devising group chemical separation procedures for use in activation analysis.     

The solvent extraction of iron from steel solutions with 2-hexylpyridine prior to the determination of trace elements

The distribution of iron(III) between aqueous hydrochloric acid and 0.1M 2-hexylpyridine in benzene was examined as a function of acid concentration in the aqueous solution, the metal concentration being kept constant, and as a function of increasing ferric chloride concentration at a constant acidity of hydrochloric acid. The distribution coefficient of Fe(III) (tracer) is dependent on the square of the 2-hexylpyridine concentration in the benzene phase. Negatively charged complexes of the type FeCl(2-)(5) may be the species extracted. The formation of a mixture of 1:1 and 1:2 complexes with 2-hexylpyridine is indicated. Salting-out effects of a number of salts have been investigated. Separation factors of several metal ions relative to iron(III) in 7M hydrochloric acid are also reported. The results indicate that iron(III) can be selectively separated from a large number of elements, and the method has been utilized for the preconcentration of non-ferrous metal ions in mild steels by selective separation of iron, before their subsequent determination by emission spectrometry.     

Neutron induced radiography in the determination of boron in drinking water

Neutron induced radiography has been applied to the determination of boron concentrations in drinking water, collected from natural springs of Reshian and Muzaffarabad areas of Azad Kashmir, Pakistan, using CR-39 etched track detectors. The technique is based upon the simultaneous irradiation with thermal neutrons of a sample of unknown concentration and a standard of known boron concentration, fixed on a track detector. The subsequent counting of alpha and ⁷Li tracks in the detector resulting from the ¹⁰B(n,)⁷Li nuclear reaction is done after chemical etching. Boron concentration in the sample is determined by comparing ⁷Li and alpha-particle track density with that of a standard of known boron concentration. Boron concentrations in drinking water samples from Muzaffarabad and Reshian area of Azad Kashmir have been found to vary from (0.054±0.001) mg/l to (0.250±0.004) mg/l with an average of (0.16±0.002) mg/l. The observed concentration of boron in drinking water has been found to be less than the provisional Maximum Acceptable Concentration level (0.4 mg//l) of WHO. The drinking water from the reported area has been found to be within safe limits as far as boron related health hazards are concerned.This revised version was published online in November 2005 with corrections to the Cover Date.     

Spectrophotometric determination of trimethoprim by oxidation in drug formulations

A spectrophotometric determination of trimethoprim is described based on the reaction of its amine group with persulfate which acts as a strong oxidizing agent in alkaline media. The reaction produces a stable yellow colored compound after heating in a boiling water bath for 30 min. At λ_max 355 nm, Beer’s law is obeyed in the concentration range 10–60 μg ml^–1 with a molar absorptivity of 2.7 × 10³ l mol^–1cm^–1. The method is applied to formulations with sulfamethoxazole. Received: 30 July 1996 / Revised: 16 October 1996 / Accepted: 22 October 1996