ELECTRON TRANSPORT BEHAVIOURS IN THE NITROGEN DIRECT CURRENT GLOW DISCHARGE

A Monte Carlo simulation is presented to describe the electron transport behaviours in the nitrogen direct current glow discharge. The energy and angular distributions of the electrons at different positions of the cathode dark space are calculated; their energy and density distribution features throughout the entire discharge are discussed. The influence of molecular vibrational excitation, typical for electron－molecule collisions, has been studied and the elementary process of active species generation has been illustrated. The simulated results reveal that, in the cathode dark space, the high-energy electrons are mainly forward scattering and behave as a high-energy ‘electron beam'. The sharp increase of the number of secondary electrons plays an important role in producing active species at the interface between the cathode dark space and the negative glow region. The vibrational excitation enhances the energy loss of electrons in the negative glow region.     

200KV重离子加速器及其应用

本文介绍一台采用双潘宁型多电荷重离子源的200kV重离子加速器,简述它在GaP光探测器的研制、聚合物材料和金属材料的离子注入改性等方面的研究与应用。     

太赫兹波在雾中的多重散射特性

太赫兹(THz)波作为微波和毫米波的延伸,它所提供的通信带宽和容量远大于毫米波。在随机介质中传播时,不但会发生时域和空域的形变,介质中的粒子还会对入射波发生散射,这些都会使得脉冲信号发生衰减。根据Mie理论与随机离散分布粒子的波传播与散射理论,计算了THz波信号入射下雾滴粒子的消光系数。结合雾滴粒子谱分布,得到了雾媒质的平均体系散射特性,采用蒙特卡罗法得到了平流雾对THz信号的多重散射特性,计算了THz波段信号对平流雾的透过率与反射率,分析了THz波段信号的前向、后向散射特性随散射角的分布。结果表明,低能见度大气环境中,雾对THz波产生的吸收和衰减不容忽视。相关研究结果对THz在大气传输、通信等方面的应用具有重要意义。     

Nonisothermal Crystallization Behavior of Polypropylene-C60 Nanocomposites

The nonisothermal crystallization behavior of polypropylene (PP) and PP-fullerene (C₆₀) nanocomposites was studied by differential scanning calorimetry (DSC). The kinetic models based on the Jeziorny, Ozawa, and Mo methods were used to analyze the nonisothermal crystallization process. The onset crystallization temperature (T_c), half-time for the crystallization (t_1/2), kinetic parameter (F(T)) by the Mo method and activation energy (ΔE) estimated by the Kissinger method showed that C₆₀ accelerates the crystallization of PP, implying a nucleating role of C₆₀. Furthermore, due to the reduced viscosity of PP by adding 5% C₆₀, the parameters of crystallization kinetics for the PP-5%C₆₀ nanocomposites changed remarkably relative to that of neat PP and when lower contents of C₆₀ were added to PP.     

Single-material guided-mode resonance filter for TE waves under normal incidence

<正>A guided-mode resonance(GMR) filter with the same material(Ta_2O_5) for both the grating layer and the waveguide layer is designed and fabricated.This simple structure is easy to fabricate and can avoid the defects at the grating/waveguide interface using different materials.The spectral response measured with a Lambda 900 spectrophotometer under normal incidence for TE waves exhibits a peak reflectance exceeding 80%at the wavelength of 1040 nm with a full-width half-maximum(FWHM) linewidth of 23 nm.We evaluate the deviations of the fabricated structure from the designed parameters.     

共焦扫描显微成象系统的点扩散函数再商讨

针对共焦扫描显微成象中物体相对于被扫描点的位置矢量是反向移动的特性,探讨了物体移动后的物函数在此基础上,根据成象的理论进行了计算,得到新的系统点扩散函数表达式,最后根据计算结果分析成象的性质,得出了系统成象的相干性.     

场源基本微元的对称性与场的性质

直接由标量基本微元（点源）和矢量基本微元（电流元等）的对称性和两个基本假设讨论基本微元产生的场矢量的性质。     

Surface modification of multi-walled carbon nanotubes by O2 plasma

The surface modification of multi-walled carbon nanotubes (MWCNTs) by O₂ plasma was carried out in this study. In order to achieve a relatively homogeneous treatment of MWCNTs powder, a rotating barrel fixed between the two discharge electrodes was used. The effect of plasma treatment parameters, such as power, time, and positions of samples (inside and outside the barrel), on the morphology and structure of MWCNTs surface was systematically analyzed by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The results showed that the direct discharge (outside the barrel) could result in not only a quick grafting of polar functional groups but also an easy damage of MWCNTs after longer time, particularly under intensive power. It was found that the surface of MWCNTs powder might be changed in three steps—expansion (loosed structure formed), peel off and oxidization with increasing of treatment time during the irradiation. In this way, a complete purification of MWCNTs powder could be finished within 30 min via plasma treatment. Our work suggested that plasma treatment could be a simple and nonpolluting method for a large scale purification of MWCNTs.     

A photonic approach for microwave/millimeter-wave frequency measurement using stimulated brillouin scattering in single mode fiber

A photonic approach for microwave/millimeter-wave (MMW) frequency measurement is proposed and demonstrated based on stimulated Brillouin scattering (SBS) of a 20-km standard single mode fiber (SSMF). After the MMW signal is modulated to a laser source with two sidebands using optical carrier suppression (OCS) modulation, its frequency can be easily measured by monitoring the SBS-induced amplification with a power meter. Due to the 1-pm resolution of a tunable pump laser source, a frequency measurement range of 1–40 GHz is demonstrated in our experiment with a frequency resolution of 125 MHz. We believe the frequency measurement range can be further extended to satisfy photonic radar front-end processing application.     

Segmented circular LD arrays side-pumped a Nd:YAG laser rod

We design a Nd:YAG module with symmetrical LD side-pumped structure in a periodical arrangement between circular LD arrays and holders. This novel design has great potential to be used in compact and miniature laser systems. Design optimization and simulation on thermal effects have been performed. An experiment has also been carried out. The experiment results indicate the all-solid-state laser with the-Nd:YAG module can stably operate in the range of 10–30 Hz with no controlling temperature by TE cooler. The laser beam had a divergence angle less than 3.8 mrad and a maximum output pulse of 174 mJ has been obtained at the pump current of 50 A and working frequency of 23 Hz, corresponding to optical-optical conversion efficiency of 40.2%.