Translation drag coefficient of a self-similar assembly of spheres immersed in an incompressible fluid.

On the basis of deterministic fractals and the Rotne-Prager hydrodynamic interaction tensor, we confirm the asymptotic as well as the finite size scaling of the friction coefficient lambda of a self-similar structure. The fractal assembly is made of N spheres with its dimension varying from D < 1 to D = 3. The number of spheres can be as high as N approximately O(10(4)). The asymptotic scaling behavior of the friction coefficient per sphere is lambda approximately N(1/D-1) for D > 1, lambda approximately (lnN)(-1) for D = 1, and lambda approximately N(0) for D < 1. The crossover behavior indicates that while in the regime of D > 1 the hydrodynamic screening effect grows with the size, for D<1 it is limited in a finite range, which decays with decreasing D.     

多极板电流变阀应用于避震器之研究

以流动模式（flow mode)多极板之电流变阀（electrorheological valve)进行避震器阻尼力特性的研究。由于电极板的大小直接影响到流体流动的剪力及避雷器的阻尼力,因此使用多极板型式来探讨避震器的特性。设计有1－5个流道之并联及1－3个流道之串联多极板电流变阀的电流变避震器,并使用自制的电流变液进行实验。由研究结果显示,流动式并联极板之电流变避震器,一个流道之阻尼力最大,流道极板增加则阻尼力反而下降,而流动式串联多极板之电流变避震器之阻尼力则随极板数递增,故需要高阻尼力之避震器较适合使用串联多极板型式。     

Magnetic properties of electroless-deposited Ni and Ni-NiO core-shell nano-arrays

Ni and Ni-NiO core-shell nano-arrays were fabricated by means of electroless deposition, where the latter was covered by a NiO shell of ∼10 nm by annealing the former at 350 °C for 30 min in an atmospheric condition. HRTEM showed that the NiO shell was developed at the expense of Ni at the array's surface. Ferromagnetic ordering of the Ni-NiO arrays was found to be suppressed compared with those of the less oxidized reference Ni arrays. This is attributed to the screening effect of the NiO shell, and weak ferromagnetism of inner Ni arrays resulted from the development of the NiO. X-ray absorption spectrum reveals that the reference Ni is partially oxidized. Also, X-ray magnetic circular dichroism suggests that the magnetic suppression of the Ni-NiO arrays is associated with a reduced spin moment.     

The effect of ITO films thickness on the properties of flexible organic light emitting diode

Indium tin oxide (ITO) thin films were deposited on cyclic olefin copolymer substrate at room temperature by an inverse target sputtering system. The crystal structure and the surface morphology of the deposited ITO films were examined by X-ray diffraction and atomic force microscopy, separately. The electrical properties of the conductive films were explored by four-point probing. Visible spectrometer was used to measure the optical properties of ITO-coated films. The performance of the flexible organic light emitting diode device with different thickness anode was investigated in this study.     

新型电谐振人工异向介质抑制阵列天线单元间互耦

基于电谐振原理和镜像原理设计了一种周期性接地边耦合SRRs(split ring resonators)结构的新型电谐振人工异向介质,进而将该人工异向介质应用于抑制微带阵列天线元间的互耦.与传统微带阵列天线中的用于抑制互耦的电磁结构相比,该人工电磁结构不仅体积小(厚度仅为0·005λ0),而且能获得优异的阵列单元间互耦抑制性能(抑制度达16·8dB).该研究成果表明人工异向介质在高密度高性能微带天线阵列设计中具有良好的应用潜能.     

Molecular mobility in polymer thin films

Fluorescence recovery after photobleaching was used to measure in-plane dye-probe diffusion coefficients, D, in thin films of monodisperse polystyrene supported on fused quartz substrates. The substrates were prepared with a high density of surface hydroxyl groups which interact favorably with repeat units of the polymer. The effects of temperature and film thickness were investigated, at temperatures above the bulk glass transition of the polymer, T(g), and in the range of film thicknesses from 1-10(2) times the radius of gyration (R(g)) of individual polymer molecules. As the film thickness decreases towards R(g) the value of D increases above the bulk values, with significant effects first appearing in films approximately 20R(g). In the thinnest films studied, about 4R(g), the values of D lie as much as two orders over bulk values. At the same time, the temperature dependence of D becomes much weaker than in bulk. Analysis by free volume theory indicates that apparent values of both T(g) and the thermal expansion coefficient for liquid state, alpha(L), decrease as the film thickness decreases. The possible effects of surface segregation of the dye probe are discussed.     

A new database and benchmark of the bond energies of noble-gas-containing molecules

We have developed a new database of structures and bond energies of 59 noble-gas-containing molecules. The structures were calculated by CCSD(T)/aug-cc-pVTZ methods and the bond energies were obtained using the CCSD(T)/complete basis set method. Many wavefunction-based and density functional theory methods have been benchmarked against the 59 accurate bond energies. Our results show that the MPW1B95, B2GP-PLYP, and DSD-BLYP functionals with the aug-cc-pVTZ basis set excel in predicting the bond energies of noble-gas molecules with mean unsigned errors (MUEs) of 2.0 to 2.1 kcal/mol. When combinations of Dunning's basis sets are used, the MPW1B95, B2GP-PLYP, DSD-BLYP, and BMK functionals give significantly lower MUEs of 1.6 to 1.9 kcal/mol. Doubly hybrid methods using B2GP-PLYP and DSD-BLYP functionals and MP2 calculation also provide satisfactory accuracy with MUEs of 1.4 to 1.5 kcal/mol. If the Ng bond energies and the total atomization energies of a group of 109 main-group molecules are considered at the same time, the MPW1B95/aug-cc-pVTZ single-level method (MUE = 2.7 kcal/mol) and the B2GP-PLYP and DSD-PLYP functionals with combinations of basis sets or using the doubly hybrid method (MUEs = 1.9-2.2 kcal/mol) give the overall best result.     

The development of a portable line-shaping optical system for silicon surface treatment

This study proposes a beam shaper for converting a circle beam profile generated with a Gaussian intensity distribution by an 808 nm diode laser into a line beam profile for silicon surface treatment applications. To produce a hand-held and low-cost device with a large spot-size laser, this study uses a portable optical system consisting of a diode laser source, a collimator, a cylindrical lens, and a plano-convex lens to generate an approximately 40 × 3:5mm² line beam profile at a working distance of 200 mm. The silicon surface treated by the line-shaped laser beam has significantly reduced reflectance spectra. The proposed system is also suitable for the surface cleaning of materials.     

Exploring the Origin of Maximum Entropy States Relevant to Resonant Modes in Modern Chladni Plates

The resonant modes generated from the modern Chladni experiment are systematically confirmed to intimately correspond to the maximum entropy states obtained from the inhomogeneous Helmholtz equation for the square and equilateral triangle plates. To investigate the origin of maximum entropy states, the inhomogeneous Helmholtz equation is modified to consider the point interaction coming from the driving oscillator. The coupling strength associated with the point interaction is characterized by a dimensionless factor α. The δ potential of the point interaction is numerically modelled by a truncated basis with an upper index N. The asymptotic behavior for the upper index N is thoroughly explored to verify that the coupling strength of α = 1.0 can make the theoretical resonant modes agree excellently with the maximum entropy states as N→∞. It is further authenticated that nearly the same resonant modes can be obtained by using a larger coupling strength α when a smaller upper index N is exploited in the calculation.     

Broadband Light-Emitting Diodes with One-Dimensional Photonic Crystal Layer

In this article, a broadband gallium-nitride-based light-emitting diode with a one-dimensional photonic crystal layer is investigated. The broadband light-emitting diode using the proposed backside reflector has high reflectance (>95%) over a 270-nm bandwidth in visible light at an arbitrary incidence angle. A broadband light-emitting diode of high output power due to the high reflectivity is achieved. Also reported are the results for light-emitting diodes by the transistor outline can (TO-can) package. The proposed light-emitting diodes possess broadband high reflected spectra, high output power for light extraction, and a good view angle.