TiN/SiC纳米多层膜的生长结构与力学性能

研究了TiN/SiC纳米多层膜中立方SiC（B1cubic SiC）的形成及其对TiN/SiC多层膜力学性能的影响.结果表明：在TiN/SiC多层膜中，非晶态的SiC层在厚度小于0.6nm时形成立方结构并与TiN形成共格外延生长的超晶格柱状晶，使多层膜产生硬度和弹性模量显著升高的超硬效应，最高硬度超过60GPa.SiC随着层厚的增加转变为非晶相，从而阻止了多层膜的共格外延生长，使薄膜呈现TiN纳米晶和SiC非晶组成的层状结构特征，同时多层膜的硬度和弹性模量下降.TiN/SiC纳米多层膜产生的超硬效应与立方 关键词： 立方碳化硅 TiN/SiC纳米多层膜 外延生长 超硬效应     

The measurements of correlation times of molecules adsorbed on silica gel,alumina and charcoal using NOESY and MAS NMR

The correlation times (τ_c) and cross relaxation rates of toluene, dimethylformamide, tetrahydrofuran, water-acetone and water-dioxane adsorbed on silica gel, alumina and charcoal were obtained by measurements of the integrated intensities of cross and diagonal peaks in their NOESY spectra. The (τ_c) of the above mentioned systems is in the range of 10^?6?10^?9 s, much longer than that in the liquid (10^?12?10^?14 s). It was found that intramolecular rotation of toluene adsorbed on charcoal is slower than that on SiO₂, Al₂O₃ and the inversion of α and β protons in tetrahydrofuran is very fast (τ_c = 1.76×10^?9 s). The cross relaxation plays an important role in the relaxation of molecules adsorbed on solid surfaces with low electron densities.     

激光诱导铝基碳纳米管薄膜及场发射性能

结合电泳沉积和激光纳米焊接技术在常温下成功制备了铝基单壁碳纳米管（SWCNTs-Al）薄膜。首先,将单壁碳纳米管电泳沉积到铝片基底上,再使用皮秒脉冲激光构建二者的可靠连接。对SWCNTs-Al薄膜进行场发射性能测试,开启电压从焊接前的5.1 V/m降低到2.1 V/m,发射电流密度显著提高且更加稳定。这主要是激光纳米焊接后界面接触阻抗减小,场致电子发射更容易实现的结果。基于SWCNTs-Al薄膜的表面形貌图和场发射性能测试结果,确定了最优的激光纳米焊接参数。     

双模随机晶场对纳米管上Blume-Capel模型磁化强度和相变的影响

近年来, 磁性纳米管的物理性质和相关应用得到了人们的广泛关注. 利用有效场理论研究了纳米管上双模随机晶场中Blume-Capel模型的磁化强度和相变性质, 得到了系统的磁化强度与温度和随机晶场的关系及其相图. 结果表明: 系统在稀释晶场、交错晶场和同向晶场中会表现出不同的磁学性质和相变行为; 稀释晶场和交错晶场会抑制系统的磁化强度, 导致其基态饱和值小于1, 而同向晶场则不会; 随着随机晶场参量的变化, 系统存在多个相变温度, 并呈现出三临界现象和重入现象.     

时间分辨傅氏变换红外光谱方法中的定时直流成分

在常规的傅里叶变换红外光谱学中，干涉图的直流成分为∫＾∞０Ｂ（σ）ｄσ，而在时间分辨ＦＴＩＲ中，直流成分Ｉｄｅ成为∫（∞，０）Ｂ（σ，τ）ｄσ，即与信号出现的时间τ有关，称为定量直流成分。     

激光二极管泵浦腔内倍频Nd：YVO4／KTP绿光噪声研究

从实验上测量了Ｎｄ：ＹＶＯ４／ＫＴＰ腔内激光器绿光噪声和腔长、泵浦功率的变化关系，并从理论上进行了分析计算、，找出多纵模情况下影响绿光噪声大小的关键因素。理论计算与实验结果相一致。     

多通道心磁系统标定方法研究

在多通道超导量子干涉器件（SQUID）磁探测系统中,磁场电压转换系数（∂ B/∂ V）是系统的一个重要参数由于SQUID器件和读出电路之间不可避免地存在差异性因此对传感器系统进行系统标定（每个通道的单独标定）显得十分重要本文采用（PCB） 板印制圆形线圈对36通道心磁系统进行标定,并与传统的亥姆霍兹方形线圈产生均匀场的标定方法进行比较结果显示PCB圆形线圈的标定结果 在1.46–1.73 pT·mV^-1 之间,亥姆霍兹方形线圈标定的结果大都在1.56–1.64 pT·mV^-1之间,结果基本一致. 关键词： 超导量子干涉器件 磁探测 磁场-电压转换系数 系统标定     

基于阻尼LSQR-LMBC的火焰三维温度场重建

光场相机可以解决辐射测温多相机系统光路复杂、同步触发难等问题,在辐射成像三维温度重建时有其独特优势. LSQR是求解基于大型稀疏矩阵最小二乘问题的经典算法,该算法用于重建三维温度场时对温度初值依赖较大,在信噪比较低的情况下重建精度不理想.本文提出阻尼LSQR-LMBC重建算法,通过在LSQR方法中添加阻尼正则化项,提高火焰三维温度场重建的抗噪性能,并结合LMBC算法,实现吸收系数和三维温度场同时求解.在数值模拟部分,随着信噪比逐渐降低,阻尼LSQR的重建效果比LSQR更加稳定,在信噪比达到13.86 d B时,重建精度大约提高30%.阻尼LSQR-LMBC的平均重建误差为6.63%.用丁烷火焰进行了实验,重建的丁烷火焰三维温度场分布符合辐射火焰燃烧的特征,和热电偶的测温数据结果进行对比,相对误差在6.8%左右.     

Palladium nanoparticles/wool keratin-assisted carbon composite-modified flexible and disposable electrochemical solid-state pH sensor

Several p H-dependent processes and reactions take place in the human body;hence,the p H of body fluids is the best indicator of disturbed health conditions.However,accurate and real-time diagnosis of the p H of body fluids is complicated because of limited commercially available p H sensors.Hence,we aimed to prepare a flexible,transparent,disposable,userfriendly,and economic strip-based solid-state p H sensor using palladium nanoparticles(Pd NPs)/N-doped carbon(NC)composite material.The Pd NPs/NC composite material was synthesized using wool keratin(WK)as a precursor.The insitu prepared Pd NPs played a key role in the controlled switching of protein structure to the N-doped carbon skeleton withπ–πarrangement at the mesoscale level,which mimics the A–B type polymeric structure,and hence,is highly susceptible to H+ions.The optimized carbonization condition in the presence of Pd NPs showed that the material obtained using a modified Ag/Ag Cl reference electrode had the highest p H sensitivity with excellent stability and durability.The optimized p H sensor showed high specificity and selectivity with a sensitivity of 55 m V/p H unit and a relative standard deviation of 0.79%.This study is the first to synthesize Pd NPs using WK as a stabilizing and reducing agent.The applicability of the sensor was investigated for biological samples,namely,saliva and gastric juices.The proposed protocol and material have implications in solid-state chemistry,where biological material will be the best choice for the synthesis of materials with anticipated performance.