Amine-directed intramolecular hydroacylation of alkenes and alkynes

Medium-ring heterocycles are prepared via an amine-directed, rhodium(I)-catalyzed intramolecular hydroacylation. The presence of an allyl substituent on the amine accelerates the reaction and increases product yields.     

Electrophoretic transport of latex particles in lipid nanotubes

Lipid vesicles can be connected by membrane nanotubes to build networks with promising bioanalytical properties. Here we characterize electrophoretic transport in such membrane tubes, with a particular eye to how their soft-material nature influences the intratube migration. In the absence of field, the tube radius is 110 +/- 26 nm, and it remains in this range during electrophoresis even though the applied electric field causes a slight decrease in the tube radius (approximately 6-11%). The electrophoretic velocity of the membrane wall (labeled with quantum dots) varies linearly with the field strength. Intratube migration is studied with latex spheres of radii 15, 50, 100, and 250 nm. The largest particle size does not enter the tube at fields strengths lower than 1250 V/m because the energy cost for expanding the tube around the particles is too high. The smaller particles migrate with essentially the same velocity as the membrane at low fields. Above 250 V/cm, the 15 nm particles exhibit an upward deviation from linear behavior and in fact migrate faster than in free solution whereas the 100 nm particles deviate downward. We propose that these nonlinear effects arise because of lipid adsorption to the particles (dominating for 15 nm particles) and a pistonlike compression of the solvent in front of the particles (dominating for 100 nm). As expected from such complexities, existing theories for a sphere migrating in a rigid-wall cylinder cannot explain our velocity results in lipid nanotubes.     

Integration of continuous-flow sampling with microchip electrophoresis using poly(dimethylsiloxane)-based valves in a reversibly sealed device

Here we describe a reversibly sealed microchip device that incorporates poly(dimethylsiloxane) (PDMS)-based valves for the rapid injection of analytes from a continuously flowing stream into a channel network for analysis with microchip electrophoresis. The microchip was reversibly sealed to a PDMS-coated glass substrate and microbore tubing was used for the introduction of gas and fluids to the microchip device. Two pneumatic valves were incorporated into the design and actuated on the order of hundreds of milliseconds, allowing analyte from a continuously flowing sampling stream to be injected into an electrophoresis separation channel. The device was characterized in terms of the valve actuation time and pushback voltage. It was also found that the addition of sodium dodecyl sulfate (SDS) to the buffer system greatly increased the reproducibility of the injection scheme and enabled the analysis of amino acids derivatized with naphthalene-2,3-dicarboxaldehyde/cyanide. Results from continuous injections of a 0.39 nL fluorescein plug into the optimized system showed that the injection process was reproducible (RSD of 0.7%, n = 10). Studies also showed that the device was capable of monitoring off-chip changes in concentration with a device lag time of 90 s. Finally, the ability of the device to rapidly monitor on-chip concentration changes was demonstrated by continually sampling from an analyte plug that was derivatized upstream from the electrophoresis/continuous flow interface. A reversibly sealed device of this type will be useful for the continuous monitoring and analysis of processes that occur either off-chip (such as microdialysis sampling) or on-chip from other integrated functions.     

Assessment of 4-nitrogenated benzyloxymethyl groups for 2'-hydroxyl protection in solid-phase RNA synthesis

The search for a 2'-OH protecting group that would impart ribonucleoside phosphoramidites with coupling kinetics and coupling efficiencies comparable to those of deoxyribonucleoside phosphoramidites led to an assessment of 2'-O-(4-nitrogenated benzyloxy)methyl groups through solid-phase RNA synthesis using phosphoramidites 2a-d, 12a, and 14a. These phosphoramidites exhibited rapid and efficient coupling properties. Particularly noteworthy is the cleavage of the 2'-O-[4-(N-methylamino)benzyloxy]methyl groups in 0.1 M AcOH, which led to U19dT within 15 min at 90 degrees C. [reaction: see text]     

Phytocannabinoid Compositions from Cannabis Act Synergistically with PARP1 Inhibitor against Ovarian Cancer Cells In Vitro and Affect the Wnt Signaling Pathway

Ovarian cancer (OC) is the single most lethal gynecologic malignancy. Cannabis sativa is used to treat various medical conditions, and is cytotoxic to a variety of cancer types. We sought to examine the effectiveness of different combinations of cannabis compounds against OC. Cytotoxic activity was determined by XTT assay on HTB75 and HTB161 cell lines. Apoptosis was determined by flow cytometry. Gene expression was determined by quantitative PCR and protein localization by confocal microscopy. The two most active fractions, F5 and F7, from a high Δ9–tetrahydrocannabinol (THC) cannabis strain extract, and their standard mix (SM), showed cytotoxic activity against OC cells and induced cell apoptosis. The most effective phytocannabinoid combination was THC+cannabichromene (CBC)+cannabigerol (CBG). These fractions acted in synergy with niraparib, a PARP inhibitor, and were ~50-fold more cytotoxic to OC cells than to normal keratinocytes. The F7 and/or niraparib treatments altered Wnt pathway-related gene expression, epithelial–mesenchymal transition (EMT) phenotype and β-catenin cellular localization. The niraparib+F7 treatment was also effective on an OC patient’s cells. Given the fact that combinations of cannabis compounds and niraparib act in synergy and alter the Wnt signaling pathway, these phytocannabinoids should be examined as effective OC treatments in further pre-clinical studies and clinical trials.     

Directed evolution experiments reveal mutations at cycloartenol synthase residue His477 that dramatically alter catalysis

[reaction: see text] Cycloartenol synthase cyclizes and rearranges oxidosqualene to the protosteryl cation and then specifically deprotonates from C-19. To identify mutants that deprotonate differently, randomly generated mutant cycloartenol synthases were selected in a yeast lanosterol synthase mutant. A novel His477Asn mutant was uncovered that produces 88% lanosterol and 12% parkeol. The His477Gln mutant produces 73% parkeol, 22% lanosterol, and 5% Delta(7)-lanosterol. These are the most accurate lanosterol synthase and parkeol synthase that have been generated by mutagenesis.     

Electrophilic acetylation and bromination reactions of benzo[b]naphtho[2,3-e][1,4]dioxin

The reactivity of benzo[b]naphtho[2,3-e][1,4]dioxin in the electrophilic aromatic substitution reactions has been studied. Friedel-Crafts acetylation resulted in the formation of three out of the possible five monoacetylated products, with the acetyl group located in positions 8 (major), 7 and 6 (minor) of the heterocycle. In the bromination reaction a higher selectivity was observed with the 6-bromo derivative found as the only monobrominated product and the 6,11-dibromo derivative found as the only polybrominated product. A ratio of unreacted heterocycle:6-bromo:6,11-dibromo derivatives in the bromination reaction has been found to depend strongly on the reaction conditions and on the heterocycle:bromine ratio.     

Nucleophilic additions to fused bicyclic five-membered ring oxocarbenium ions: evidence for preferential attack on the inside face

Evidence is provided that nucleophilic attack on five-membered ring oxocarbenium ions occurs from the inside face of the envelope. An eight-five fused-bicyclic system in which two substituents are constrained to pseudoequatorial positions underwent nucleophilic addition with selectivity that was comparable to an unconstrained monocyclic system. On the other hand, a bicyclic six-five analogue underwent reaction with low selectivity. This observation indicates that minimization of eclipsing interactions by attacking inside the envelope is not enough to control selectivity, but that the changes in the overall three-dimensional structure of the ring must be favorable as well. In the bicyclic six-five series, the six-membered ring is accommodated in the cation, but it destabilizes the transition state structure leading to the first-formed product of inside attack.     

Infrared spectra of aluminum hydrides in solid hydrogen: Al2H4 and Al2H6

The reaction of laser-ablated Al atoms and normal-H(2) during co-deposition at 3.5 K produces AlH, AlH(2), and AlH(3) based on infrared spectra and the results of isotopic substitution (D(2), H(2) + D(2) mixtures, HD). Four new bands are assigned to Al(2)H(4) from annealing, photochemistry, and agreement with frequencies calculated using density functional theory. Ultraviolet photolysis markedly increases the yield of AlH(3) and seven new absorptions for Al(2)H(6) in the infrared spectrum of the solid hydrogen sample. These frequencies include terminal Al-H(2) and bridge Al-H-Al stretching and AlH(2) bending modes, which are accurately predicted by quantum chemical calculations for dibridged Al(2)H(6), a molecule isostructural with diborane. Annealing these samples to remove the H(2) matrix decreases the sharp AlH(3) and Al(2)H(6) absorptions and forms broad 1720 +/- 20 and 720 +/- 20 cm(-1) bands, which are due to solid (AlH(3))(n). Complementary experiments with thermal Al atoms and para-H(2) at 2.4 K give similar spectra and most product frequencies within 2 cm(-1). Although many volatile binary boron hydride compounds are known, binary aluminum hydride chemistry is limited to the polymeric (AlH(3))( solid. Our experimental characterization of the dibridged Al(2)H(6) molecule provides an important link between the chemistries of boron and aluminum.