Kinetic parameters from thermogravimetric study of used rubber granulates–polyurethane composites

From the TG data of rubber granulates, different polyurethane and composites it can be seen that the thermal decomposition for the rubber granulate and all of the composites start above 520 K. Two major mass losses for the rubber granulates and majority of the composites were observed and thermal decomposition is essentially complete by ~820 K. The changes of activation energies of lower and higher temperature decomposition, calculated according to the different equations were observed for a priori assumed first-order reaction for devolatilisation. Differences between determined and calculated results could suggest a possible reaction between polyurethane agents and rubber granulate during the composites formations.     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. 58. Zur Kenntnis von 2-(Dimethylaminomethyl)ferrocenyl-Verbindungen des Vanadiums,Molybdäns,Wolframs, Thoriums und Urans

Contributions to the Chemistry of Transition Metal Alkyl Compounds. 58 On 2-(Dimethylaminomethyl)ferrocenyl Compounds of Vanadium, Molybdenum, Tungsten, Thorium, and Uranium Earlier results according to which dimethylaminomethylferrocenyl groups (FcN) are able to form stable organometallic chelate compounds were confirmed by synthesis of the heterobimetallic chelate compounds (FcN)₂VO · Li(acac) II , (FcN)MoO₂(acac) III , (FcN)WOCl₃ IV , (FcN)Th(acac)₃ V , and (FcN)UO₂(acac) VI from the corresponding metal acetylacetonates or oxidchlorides and (FcN)Li I . The new compounds were characterized by elemental analysis, the i.r., ¹H-n.m.r., and electron spectra and by their effective magnetic moments.     

Ethylenediaminetetraacetato-monoperoxo complexes of vanadium(V)

Summary The monoperoxo complexes, M₂[VO(HEDTA)(O₂)]· 4H₂O, where M is K⁺ or NH ₄ ⁺ and H₄EDTA is ethylene-diaminetetraacetic acid, were prepared and characterized by Raman and i.r. spectra in the solid state and in aqueous solution. The single crystal X-ray study revealed a pentagonal bipyramidal anion structure with a tetradentate HEDTA(3—) ligand. The decomposition of complexes in aqueous solution to blue vanadium(IV) complexes as end products proceeds via a nonperoxo complex of vanadium.     

Electrochemical vapor generation of selenium species after online photolysis and reduction by UV-irradiation under nano TiO<Subscript>2</Subscript> photocatalysis and its application to selenium speciation by HPLC coupled with atomic fluorescence spectrometry

An online UV photolysis and UV/TiO₂ photocatalysis reduction device (UV–UV/TiO₂ PCRD) and an electrochemical vapor generation (ECVG) cell have been used for the first time as an interface between high-performance liquid chromatography (HPLC) and atomic fluorescence spectrometry (AFS) for selenium speciation. The newly designed ECVG cell of approximately 115 L dead volume consists of a carbon fiber cathode and a platinum loop anode; the atomic hydrogen generated on the cathode was used to reduce selenium to vapor species for AFS determination. The noise was greatly reduced compared with that obtained by use of the UV–UV/TiO₂ PCRD–KBH₄–acid interface. The detection limits obtained for seleno-DL-cystine (SeCys), selenite (Se^IV), seleno-DL-methionine (SeMet), and selenate (Se^VI) were 2.1, 2.9, 4.3, and 3.5 ng mL^–1, respectively. The proposed method was successfully applied to the speciation of selenium in water-soluble extracts of garlic shoots cultured with different selenium species. The results obtained suggested that UV–UV/TiO₂ PCRD–ECVG should be an effective interface between HPLC and AFS for the speciation of elements amenable to vapor generation, and is superior to methods involving KBH₄.     

Multiple-injection affinity capillary electrophoresis to estimate binding constants of receptors to ligands

Multiple-injection affinity capillary electrophoresis (MIACE) is used to determine binding constants (K _b) between receptors and ligands using as model systems vancomycin and teicoplanin from Streptomyces orientalis and Actinoplanes teichomyceticus, respectively, and their binding to D-Ala-D-Ala peptides and carbonic anhydrase B (CAB. EC 4.2.1.1) and the binding of the latter to arylsulfonamides. A sample plug containing a non-interacting standard is first injected followed by multiple plugs of sample containing the receptor and then a final injection of sample containing a second standard. Between each injection of sample, a small plug of buffer is injected which contains an increasing concentration of ligand to effect separation between the multiple injections of sample. Electrophoresis is then carried out in an increasing concentration of ligand in the running buffer. Continued electrophoresis results in a shift in the migration time of the receptor in the sample plugs upon binding to their respective ligand. Analysis of the change in the relative migration time ratio (RMTR) or electrophoretic mobility (μ) of the resultant receptor–ligand complex relative to the non-interacting standards, as a function of the concentration of ligand yields a value for K _b. The MIACE technique is a modification in the ACE method that allows for the estimation of binding affinities between biological interactions on a timescale faster than that found for standard ACE. In addition sample volume requirements for the technique are reduced compared to traditional ACE assays. These findings demonstrate the advantage of using MIACE to estimate binding parameters between receptors and ligands.     

Estimating measurement uncertainty in an afternoon. A case study in the practical application of measurement uncertainty

The ISO/IEC 17025:1999 standard requires chemical testing laboratories to have an estimate of the uncertainty of their measurements. This is a new requirement for many laboratories and there is confusion as to how to estimate uncertainty. Concerns have been raised about the time and effort required to obtain uncertainty estimates.Uncertainty budgets were prepared for the measurement of benzene, toluene, ethyl benzene and xylenes (BTEX) in water using purge and trap coupled with GC/MS. A time limit of one working afternoon (2 pm–5.30 pm) was imposed for preparing the uncertainty estimate. Details of the uncertainty estimate for toluene are described.The method in question had been in routine use for several years and the laboratory held third party (NATA) accreditation for the test. Consequently a considerable amount of performance data was readily available. Relevant information was extracted from the documented test method, validation data, instrument calibration and from routine quality control. This data was combined according to the principles of the ISO Guide to the Expression of Uncertainty, as promulgated in the Eurachem document "Quantifying Uncertainty in Analytical Measurement."The uncertainty estimates were compared to estimates obtained from generalised empirical models (the Horwitz and Lowthian equations), and from interlaboratory studies of this analysis.A traceability chain from routine measurements to the SI units of metre, kilogram and mole is described.Realistic and useful uncertainty estimates were obtained with a few hours work using data extant in the laboratory.     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.     

Alkyl (C<Subscript>10</Subscript>, C<Subscript>12</Subscript>, C<Subscript>14</Subscript> and C<Subscript>16</Subscript>) triphenyl phosphonium bromide influenced cloud points of nonionic surfactants (Triton X 100, Brij 56 and Brij 97) and the polymer (Polyvinyl methyl ether)

The clouding points (CP) of the nonionic surfactants p-tert-octyl phenyl polyoxyethylene ether (Triton X 100), Brij-56 and Brij-97, and the water soluble polymer polyvinylmethylether (PVME) have been measured in the presence of the ionic surfactants alkyl (C₁₀, C₁₂, C₁₄ and C₁₆) triphenyl phosphonium bromides (ATPBs). The threshold additive concentrations required for efficient CP enhancement of the systems that were studied have been determined. Considering CP as the threshold state of phase separation, the energetics of the process at different additive concentrations has been evaluated. The spontaneity of free energy of the clouding process (G _c ⁰ ) at the transition concentrations followed the order PVME > TX 100  Bj 56 > Bj 97. The clouding process has been found to be energetically endothermic with fairly large enthalpy and entropy changes that nicely compensate each other. The compensation temperature has been evaluated and compared with different types of the clouding agents.This revised version was published online in January 2005 with corrections to the names of the authors.     

Applications of homemade kit in mutation detection of genes

With the accomplishment of Human Genome Project (HGP), single nucleotide polymorphism (SNP) and mutation detection in human genome are becom-ing a new researching focus. These researches can help us to understand the phenotype diversity of indi-vidual, disease susceptibility and drug resistance of different colonies. Traditional method used for muta-tion detection is slab gel electrophoresis, which re-mains labor-intensive and time-consuming because of the requirement of radioactivity or te…     

Adsorption of<Emphasis Type="Italic"> N</Emphasis>-dodecyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethyl-3-ammonio-1-propanesulfonate (DDAPS), a model zwitterionic surfactant,on the Au(111) electrode surface

Electrochemical measurements including cyclic voltammetry, differential capacity, and chronocoulometry have been used to characterize the adsorption behaviors of the zwitterionic surfactant N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS) on the Au(111) electrode surface. The thermodynamics of the ideally polarized electrode have been employed to determine the Gibbs excess and the Gibbs energy of adsorption. The results show that the adsorption of DDAPS has a multistate character. The first two states are observed at potentials close to zero charge. At low bulk DDAPS concentrations, it corresponds to the formation of a film of nearly flat adsorbed molecules. At higher concentrations it is converted into a hemimicellar state. The second state is formed at negative potentials and charge densities close to 0 C cm^–2. It corresponds to a film of tilted molecules oriented with the hydrocarbon tail towards the metal and the polar head toward the solution.Dedicated to Professor Zbigniew Galus on the occasion of his 70^th birthday and in recognition of his many contributions to electrochemistry.