Study of the drying zirconia gel-precipitates using thermal analysis

Thermoanalytical techniques (TG, DTG, DTA and EGA) can be helpful in studying gel compositions and relating the chemical history and the role of the precipitant to the chemical properties of gels. The objective of our work was to determine the influence of the initial conditions in the reaction mixture on the product characteristics. Zirconia gels were prepared by the gelprecipitation method by the hydrolysis of zirconium tetrachloride dissolved in methanol. The substitution of water by methanol was chosen in order to obtain a reaction medium in which better control of the hydrolysis and condensation reactions of the zirconium precursor were achieved and thus also better control of the final properties of the dried zirconia gel-precipitates could be obtained. The nature of the hydrated zirconia gels obtained during the gelation process is strongly influenced by the conditions of the reaction mixture, e.g. concentration of the zirconium precursor, the mixing rate and particularly by the amount of water added. To distinguish between various types of water in the gel-precipitates, the furnace atmosphere and the partial water pressure were altered appropriately. It was shown that initial zirconium to water molar ratio has a significant effect on the properties of the final products. It was assumed that, according to the preparation conditions, three different types of water are present in the formed zirconia gel-precipitates. Modification of the dehydration processes of zirconia gel-precipitates enables control of the final microstructural and surface properties of the dried gels which are suitable for further catalysts support as well as mixed oxide preparation.     

Shockley surface states on three faces of bcc iron

Strictly localized or resonance Shockley surface states have been found on the (111), (010) and (110) faces of paramagnetic bcc iron for ,¯M and ¯N points in the corresponding surface Brillouin zones. Energy, character of wave function and its damping for these states are reported. Emphasis is laid on implications of surface states in photoemission, field-electron and -ion emission, electron energy-loss or disappearance potential spectroscopy, Auger electron spectroscopy, work function, magnetic properties, electric conductivity, as well as chemisorption and catalysis.     

Analytische Aspekte der Oxydation organischer Stickstoffverbindungen mit Chromsäure. II

Zusammenfassung Eine Halbmikromethode zur Bestimmung der an Kohlenstoff oder Sauerstoff gebundenen Nitro- und Nitrosogruppen in organischen Verbindungen wurde ausgearbeitet. Die Methode beruht auf dem oxydativen Aufschluß der Substanz mit einem Chromsäure—Schwefelsäure-Gemisch, wobei die Nitro- und Nitrosogruppen quantitativ in Salpetersäure übergehen. Diese wird mit Devarda-Legierung in alkalischem Medium zu Ammoniak reduziert, das dann im Stickstoffstrom abdestilliert und acidimetrisch titriert wird.

---

Summary A semimicro method for determining nitro- and nitroso groups attached to carbon or oxygen in organic compounds has been worked out. The method is based on the oxidative decomposition of the sample with a chromic acid-sulfuric acid mixture, the nitro and the nitroso groups being quantitatively transformed into nitric acid. The latter is reduced to ammonia by means of Devarda alloy in alkaline medium, and is then distilled off in a stream of nitrogen and titrated with a standard acid solution.

---

Résumé On a mis au point une méthode à l'échelle semimicro pour le dosage dans les substances organiques de groupes nitro et nitroso liés au carbone ou à l'oxygène. La méthode repose sur l'attaque oxydante de la substance par un mélange acide chromique-acide sulfurique, ce qui transforme quantitativement les groupes nitro et nitroso en acide nitrique. Au moyen de l'alliage de Devarda en milieu alcalin, on réduit celui-ci en ammoniac que l'on chasse par distillation dans un courant d'azote et que l'on titre par acidimétrie.

     

The luminescence efficiency of YAG: Ce phosphors

The luminescence intensity of Yttrium aluminium garnet activated by the Ce³⁺ (YAGCe³⁺) under cathode-ray excitation depends on the preparation method and content of some dopants. Samples containing Fe, Pt, Ir or some colour centre, respectively, show relatively low luminescence. The maximum luminescence intensity was obtained with the Czochralski method grown single crystals in 98% Ar+2% H₂ atmosphere which were sensitized by oxygen annealing followed by treatment at 1500 °C in molybdenum container using a wet hydrogen atmosphere.     

Corpuscular diagnostics of a hollow-cathode discharge-III. The metal-ions-regime evolution

The variations in time of mass spectra of ions, extracted from the hollow-cathode discharge in the regime of the intensive sputtering of the cathode material were measured. The mass spectrum changes in time conspicuously. From the results of measurements a distinct anisotropy of ion beam is inferred. The discharge turns into a metal-ions regime.The helpful discussions with Dr. J. Musil are gratefully acknowledged.     

The small momentum transfer k L o C→K S 0 C regeneration at high energies

Results of the first elastic K _S ^o regeneration experiment on carbon, using magnetic spark chamber spectrometer, are presented in the beam momentum interval 10p50 GeV/c. The d ifferentia cross section d/dt is reconstructed in the range 0·0025–t0·02 (GeV/c)² and its slopeB is found to be momentum independent with an average valueB=(65±11) (GeV/c)^–2. The results are in agreement with the calculations using the coherent production model.     

Approximate ground state in a model with spontaneous symmetry breakdown

The spontaneous symmetry breakdown is treated by means of a variational approach. Use is made of coherent states of Glauber and of pairing states of BCS-type as the translationally invariant vacuum states for the discussion of the real scalar field ⁴ withm ₀ ² 0. The first type of trial states reproduces the usual approach to spontaneous symmetry breakdown (-) in the tree approximation (which is possible only form ₀ ² <0), while the second type of trial states offers the possibility of spontaneous symmetry breakdown even form ₀ ² =0.     

Cubic splines and the Lippmann-Schwinger equation

The Galerkin method of solution of integral equations using splines is proposed. This method is applied to the Lippmann-Schwinger equation. Bound state energies and correspondingt-matrices are calculated for various potentials. This method can also be applied to reduce the Faddeev equation to the one-dimensional ones.The authors are grateful to Doc. J.Kvasnica for number of useful discussions and to M.erný for help with numerical calculations.     

Triplet losses in dye lasers

The expression for losses due to triplet states in dye laser considered as a six-level system is given. It is shown that triplet losses depend on pumping parameters and photon number. Depending on molecular and cavity parameters two different behaviours of dye lasers are expected. Physical conditions are discussed in which triplet losses as well as photon number undergo a jump at the threshold.     

Bestimmung von C-Methylgruppen in organischen Sauerstoffverbindungen durch Oxydation mit Chromsäure unter optimalen Bedingungen. I

Zusammenfassung Eine Reihe sauerstoffhaltiger Modellsubstanzen, die Methylgruppen am primären, sekundären oder doppelt gebundenen Kohlenstoffatom enthalten, wurden mit einem Gemisch von 2 T. 5-n Chromsäure und 1 T. konz. Schwefelsäure 45 Minuten bei 130° C oxydiert. Die entstandene Essigsäure wurde mit Wasserdampf abdestilliert und alkalimetrisch titriert. Die angeführten Reaktionsbedingungen können als optimal angesehen werden, da sie die größte oxydative Wirkung haben, bei der jedoch Essigsäure nicht weiter oxydiert wird. Der Abbau des Kohlenstoffskeletts verläuft schneller und vollständiger als bei der Methode vonKuhn undRoth. Die Essigsäureausbeute lag zwischen 0,70 und 0,95 Mol Essigsäure je C-Methylgruppe und wurde in Abhängigkeit von der Struktur der untersuchten Stoffe diskutiert.

---

Determination of C-methyl groups in organic oxygen compounds through oxidation with chromic acid under optimal conditions

Summary A number of oxygen-containing model substances, which contained methyl groups on primary, secondary or doubly bound carbon atoms, were oxidized with a mixture of 2 parts of 5N chromic acid and 1 part of conc. sulfuric acid for 45 minutes ar 130° C. The resulting acetic acid was distilled off with steam and titrated alkametrically. The cited reaction conditions may be regarded as optimal, because they exert the greatest oxidative action, which however the acetic acid is not further oxidized. The degradation of the carbon skeleton proceeds faster and more completely than in the method ofKuhn andRoth. The yield of acetic acid lay between 0.70 and 0.95 mol acetic acid per C-methyl group and was discussed with respect to the structure of the investigated material.

---

---

In dieser Mitteilung ist der erste Teil der Dissertationsarbeit von Frau Dipl.-Ing.B. Voláková inbegriffen.