Design of highly nonlinear dispersion flattened hexagonal photonic crystal fibers for dental optical coherence tomography applications

In this paper, we propose a highly nonlinear dispersion flattened hexagonal photonic crystal fiber (HNDF-HPCF) with nonlinear coefficients as large as 57.5W⁻¹ km⁻¹ at 1.31 μm wavelength for dental optical coherence tomography (OCT) applications. This HNDF-HPCF offers not only large nonlinear coefficient but also very flat dispersion slope and very low confinement losses. Using these characteristics of our proposed PCF, it is shown through simulations by using finite difference method with an anisotropic perfectly matched boundary layer that this PCF offers the efficient supercontinuum (SC) generation for dental OCT applications at 1.31 μm wavelength using a picosecond pulse easily produced by commercially available less expensive laser sources. Coherent length of light source using SC is found 10 μm and the spatial resolutions in the depth direction for dental applications of OCT are found about 6.1 μm for enamel and 6.5 μm for dentin.     

Simultaneous observation of low temperature 4f-4f and 3d-3d emission spectra in a series of Cr(III)(ox)Ln(III) assembly

We report here the low temperature emission spectra in the heterometal dinuclear 3d-4f assembled molecular system [(acac)₂Cr^III(μ-ox)Ln^III(HBpz₃)₂] (Cr(ox)Ln:acac⁻=acetylacetonate, ox²⁻=oxalate, HBpz₃⁻=hydrotris(pyrazol-1-yl)borate; Ln=La, Nd, Ho, Er , Tm and Yb) in comparison with those of Na[Cr(acac)₂(ox)] and [(HBpz₃)₂Ln(μ-ox)Ln(HBpz₃)₂](Ln=Nd and Er). From 10 to 150 K the Cr(ox)Ln complexes show a broad emission band around 800 nm from the ²E state of Cr(III) moiety. At room temperature no ²E-⁴A₂ emission was observed in the Cr(ox)Ln except for the La and Lu complexes. On warming from 10 to 300 K rapid quenching of the ²E-⁴A₂ emission of Cr(III) is suggested to result from the energy transfer from Cr to Ln in the Cr(ox)Ln. The excitation spectra and the life-time were also measured with monitoring the 4f-4f emission peaks of the Cr(ox)Yb complex.     

Generation of vortices by a streamwise oscillating cylinder

The wake of a streamwise oscillating cylinder is presently investigated. The Reynolds number investigated is 300, based on the cylinder diameterd. The cylinder oscillates at an amplitude of 0.5d and a frequencyf _e/f_s=1.8, wheref _e is the cylinder oscillating frequency andf _s is the natural vortex shedding frequency of a stationary cylinder. Under these conditions the flow is essentially two dimensional. A two-dimensional direct numerical simulation (DNS) scheme has been developed to calculate the flow. The DNS results display a street of binary vortices, each containing two counter-rotating vortical structures, symmetrical about the centerline, which is in excellent agreement with measurements. The drag and lift on the cylinder have been examined. The time averaged drag and lift are 1.4 and 0, respectively, which are the same as those on a stationary cylinder at the sameRe. However, the fluctuating drag was high, about 2.68. It has been found that, being symmetrically formed about the centerline, the binary vortices induce an essentially zero fluctuating lift, which may have a profound implication in flow control and engineering.     

Analysis of coir fiber acoustical characteristics

Coir fiber from coconut husk is an important agricultural waste in Malaysia. Acoustic absorption coefficient of the fiber as a porous material is studied in this paper. Two types of fiber are investigated, fresh from wet market and industrial prepared mixed with binder. Moreover two analytical models, namely; Delany–Bazley and Biot–Allard are used for analysis. Experimental measurements in impedance tube are conducted to validate the analytical outcomes. Results show that fresh coir fiber has an average absorption coefficient of 0.8 at f > 1360 Hz and 20 mm thickness. Increasing the thickness is improved the sound absorption in lower frequencies, having the same average at f > 578 Hz and 45 mm thickness. Delany–Bazley technique can be used for both types of fiber while Biot–Allard method is compensated for the industrial prepared fiber considering the binder additive. This form generally shows poor acoustical absorption in low frequencies. Inevitably, fiber has to be mixed with additives in commercial use to enhance its characteristics such as stiffness, unti-fungus and flammability. Hence other approaches such as adding air gap or perforated plate should be used to improve the acoustical properties of industrial treated coir fiber.     

Electrical and optical characteristics of porous silicon impregnated with LaF3 by a novel chemical bath technique

The structural, electrical and optical characteristics of porous silicon (PS) due to the impregnation of LaF₃ into PS by a novel chemical-bath deposition (CBD) technique have been investigated in this article. Without removing the PS from the anodization chamber the impregnation with LaF₃ has been done by reacting LaCl₃ with HF in the same chamber at room temperature. The impregnation of LaF₃ was confirmed by the SEM on the cross-section of the LaF₃/PS/Si system and EDX. The modification of PS surface by LaF₃ had direct influence on the electrical and optical properties of PS. Electrical properties of Ag/LaF₃/PS/p-Si/Ag structures were studied through the current-voltage (I-V) and capacitance-voltage (C-V) characteristics. Formation of metal-insulator-semiconductor (MIS) diode was evident whose forward current increased with annealing. A diode factor of about 2.4 has been obtained for the annealed heterostructure indicating a high density of trap states. The C⁻²-V curves of all samples showed negative flat band voltage of around −2 V confirming a large number of fixed positive charges in the LaF₃. The photoluminescence (PL) intensity of the LaF₃-impregnated PS showed aging for the as-deposited samples, but when annealed PS structure recovered the PL intensity. Experimental results show that the optimized chemical bath passivation process for the LaF₃ on porous silicon could enable the porous silicon to be an important material for photonic application.     

The radiation shielding offered by the commercial glass installed in Bangladeshi dwellings

One sign of a vibrant Bangladeshi economy has been the move away from the use of more traditional housing materials towards a preference for modern constructional media. Glass, one such example, used both decoratively and in a structural context, offers various advantageous properties and facets including a protective feature against radiation that has not previously been considered. Current interest examines the dosimetric possibilities offered by the commercial glass as a secondary shield and also in retrospective ionising radiation exposure analysis. Four popular brands of window glass are investigated, all available within the local market (PHP-Bangladesh, Usmania-Bangladesh, Nasir-Bangladesh and Rider-China), all with the same thickness and colour, varying in terms of elemental weight fractions as evaluated by energy dispersive X-ray analysis. As potential attenuators of transmitted radiation thereby forming secondary barriers against radiation exposure from penetrating radiations, the four brands of glass have been studied using photon energies from 59 up to 1332 keV, a range of values representative of that potentially encountered in incidents. Use has been made of a well-shielded high-purity germanium γ-ray spectrometer and associated electronics, providing for evaluation of the characteristic barrier parameters of half-value layer, radiation protection efficiency and effective atomic number (Z_eff). Of the four brands investigated, Rider provides superior secondary shielding performance. Concerning potential retrospective dosimetry the effective atomic number of the glass samples are comparable with that of the commercial thermoluminescence (TL) dosimeter TLD-200. At high doses, the TL yields are sufficient to provide for retrospective accident dosimetry.     

Study of reduction processes over cerium oxide surfaces with atomic hydrogen using ultra accelerated quantum chemical molecular dynamics

Ceria plays an important role in catalysis, due to its ability to store and release oxygen depending on the condition present in the catalyst environment. To analyze the role of ceria in catalytic reactions, it is necessary to know the details of the interaction of ceria surface with environmentally sensitive molecules. This study was conducted using ultra accelerated quantum chemical molecular dynamics. Its purpose was to investigate the reduction process of the (1 1 1) and (1 1 0) surfaces of ceria with atomic hydrogen as well as water desorption mechanisms from the surfaces. This simulation demonstrated that when a high-energy colliding hydrogen atoms are adsorbed on the ceria, it pulls up an O atom from the ceria surfaces and results in the formation of a H₂O molecule. This is the first dynamics simulation related to such reduction processes based on quantum chemistry.     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.