Efficient synthesis of thioesters and amides from aldehydes by using an intermolecular radical reaction in water

The combination of the water-soluble radical initiator, 2,2'-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (VA-044) and the surfactant, cetyltrimethyl-ammonium bromide (CTAB), was found to be the most suitable condition for the effective and direct synthesis of useful active thioesters (pentafluorophenyl thioesters) in water. In addition, the direct amidation of aldehydes was achieved by the addition of the amines to the thioesterification reaction mixture in water.     

Skeletal diversity by allylation/RCM on Ugi four-component coupling reaction products

Here, we report a diversity-oriented synthetic approach toward skeletally diverse, cyclized peptidomimetics with diverse appendages. Starting from α-(N-acylamino)amides with various appendages, 12 to 16-membered lactams with defined olefin geometry were synthesized by a common synthetic sequence. We also synthesized the macrocycle in a liquid phase directed toward a construction of the peptidomimetics library.     

Double-chelation-assisted Rh-catalyzed intermolecular hydroacylation between salicylaldehydes and 1,4-penta- or 1,5-hexadienes

Intermolecular hydroacylation between salicylaldehydes 1, 26-40 and 1,4-penta- or 1,5-hexadienes 4-13 by Rh-catalyst proceeded under mild reaction conditions to give a mixture of iso- and normal-hydroacylated products 14-25, 41-55, and 57-60. In the hydroacylation reaction, chelation of both salicylaldehyde and diene to the Rh-complex plays a crucial role. The ratio of iso- and normal-hydroacylated products could be regulated by the addition of salicylic acid or amines. The effects of various Rh-complexes, solvents, and additives were examined, and the plausible mechanisms of the catalytic cycle were proposed on the basis of the deuterium-labeling salicylaldehyde experiments.     

SEC–MALLS analysis of cellulose using LiCl/1,3-dimethyl-2-imidazolidinone as an eluent

The lithium chloride/1,3-dimethyl-2-imidazolidinone (LiCl/DMI) solvent system for cellulose was adopted as a mobile phase of size-exclusion chromatographic (SEC) analysis of cellulose, and the applicability of this system was examined using multi-angle laser light scattering and ¹³C-NMR analysis. The results indicate that 8% (w/v) LiCl/DMI ID a true solvent for cellulose, and that cellulose molecules dissolving ID 1% (w/v) LiCl/DMI are separated orderly depending on their molecular mass (MM) or root-mean-square (RMS) radius by the SEC system. Practically, no aggregates were detected ID the dilute cellulose/LiCl/DMI solutions. Furthermore, high stability of cellulose/LiCl/DMI solutions has been demonstrated; only a few percent of decline ID average MM was observed even after storage for 6 months at room temperature. Relationships between RMS radius and MM for hardwood bleached kraft pulp ID 1% LiCl/DMI was estimated as the following equation: _g^0.59, corresponding to a Mark–Houwink–Sakurada exponent of 0.77.     

Motor protein nano-biomachine powered by self-supplying ATP

A new nano-biomachine has been created from microtubules (MTs) and hetero-bifunctional polymer particles bearing pyruvate kinase, which is propelled on glass surfaces coated with kinesin by use of self-supplying ATP.     

NOx-Sorbing Metal Oxides, MnOx–CeO2. Oxidative NO Adsorption and NOx–H2 Reaction

(n)MnO_x–(1?n)CeO₂ binary oxides have been studied for the sorptive NO removal and subsequent reduction of NO_x sorbed to N₂ at low temperatures (≤150 °C). The solid solution with a fluorite-type structure was found to be effective for oxidative NO adsorption, which yielded nitrate (NO^? ₃) and/or nitrite (NO^? ₂) species on the surface depending on temperature, O₂ concentration in the gas feed, and composition of the binary oxide (n). A surface reaction model was derived on the basis of XPS, TPD, and DRIFTS analyses. Redox of Mn accompanied by simultaneous oxygen equilibration between the surface and the gas phase promoted the oxidative NO adsorption. The reactivity of the adsorbed NO_x toward H₂ was examined for MnO_x–CeO₂ impregnated with Pd, which is known as a nonselective catalyst toward NO–H₂ reaction in the presence of excess oxygen. The Pd/MnO_x–CeO₂ catalyst after saturated by the NO uptake could be regenerated by micropulse injections of H₂ at 150 °C. Evidence was presented to show that the role of Pd is to generate reactive hydrogen atoms, which spillover onto the MnO_x–CeO₂ surface and reduce nitrite/nitrate adsorbing thereon. Because of the lower reducibility of nitrate and the competitive H₂–O₂ combustion, H₂–NO reaction was suppressed to a certain extent in the presence of O₂. Nevertheless, Pd/MnO_x–CeO₂ attained 65% NO-conversion in a steady stream of 0.08% NO, 2% H₂, and 6% O₂ in He at as low as 150 °C, compared to ca. 30% conversion for Pd/γ–Al₂O₃ at the same temperature. The combination of NO_x-sorbing materials and H₂-activation catalysts is expected to pave the way to development of novel NO_x-sorbing catalysts for selective deNO_x at very low temperatures.     

1,2,4-Triazines, 9. The synthesis of novel 4-amino-1,6-dihydro-1,2,4-triazinones

3-Alkylthio-4-amino-1,6-dihydro-1,2,4-triazin-5(4H)-ones were synthesized by the reduction of 3-thio-4-amino-1,2,4-triazine-3,5(2.H,4H)-diones and successive S-alkylation. The regiospecific alkylation on the N-1 position or the exo amino group leads to a variety of 1,6-dihydro-1,2,4-triazin-5(4H)-one derivatives. An alternative synthesis of 3-thio-4-amino-1,6-dihydro-1,2,4-triazine-3,5(2H,4H)-diones was accomplished through the cyclization of 1-thiocarbohydrazidoacetamide derivatives.     

1,2,4-triazines. III. A convenient and general synthesis of 4H-[1,3,4]thiadiazolo[2,3-c][1,2,4]triazin-4-ones

4H-[1,3,4]Thiadiazolo[2,3-c][1,2,4]triazin-4-ones were prepared by cyclization of 3-thio-4-amino-1,2,4-tri-azine-3,5(2H,4H)-diones with a variety of acids in the presence of concentrated sulfuric acid. The synthesis appears to be general.     

Ruthenium-catalyzed propargylic substitution reactions of propargylic alcohols with oxygen-, nitrogen-, and phosphorus-centered nucleophiles

The scope and limitations of the ruthenium-catalyzed propargylic substitution reaction of propargylic alcohols with heteroatom-centered nucleophiles are presented. Oxygen-, nitrogen-, and phosphorus-centered nucleophiles such as alcohols, amines, amides, and phosphine oxide are available for this catalytic reaction. Only the thiolate-bridged diruthenium complexes can work as catalysts for this reaction. Results of some stoichiometric and catalytic reactions indicate that the catalytic propargylic substitution reaction proceeds via an allenylidene complex formed in situ, whereby the attack of nucleophiles to the allenylidene C(gamma) atom is a key step. Investigation of the relative rate constants for the reaction of propargylic alcohols with several para-substituted anilines reveals that the attack of anilines on the allenylidene C(gamma) atom is not involved in the rate-determining step and rather the acidity of conjugated anilines of an alkynyl complex, which is formed after the attack of aniline on the C(gamma) atom, is considered to be the most important factor to determine the rate of this catalytic reaction. The key point to promote this catalytic reaction by using the thiolate-bridged diruthenium complexes is considered to be the ease of the ligand exchange step between a vinylidene ligand on the diruthenium complexes and another propargylic alcohol in the catalytic cycle. The reason why only the thiolate-bridged diruthenium complexes promote the ligand exchange step more easily with respect to other monoruthenium complexes in this catalytic reaction should be that one Ru moiety, which is not involved in the allenylidene formation, works as an electron pool or a mobile ligand to another Ru site. The catalytic procedure presented here provides a versatile, direct, and one-step method for propargylic substitution of propargylic alcohols in contrast to the so far well-known stoichiometric and stepwise Nicholas reaction.     

Purification of Food Color Red No. 106 (acid red) using pH-zone-refining counter-current chromatography

pH-Zone-refining counter-current chromatography was successfully applied to the separation of the main components of Food Color Red No. 106 (R-106, acid red, Color Index No. 45100). A 300-mg quantity of sample was separated using the following two-phase solvent system: n-butanol-water, 40 mM sulfuric acid in organic stationary phase and 30 mM ammonia in aqueous mobile phase. The obtained fractions were analyzed by high-performance liquid chromatography and fast atom bombardment mass spectrometry. The separation yielded 261.9 mg of main component of acid red with purity of 99.9%.