Effect of Immobilization on Insoluble Collagen Concentration and Type I and Type III Collagen Isoforms of Rat Soleus Muscle

Immobilization is often associated with decreased muscle elasticity. This condition is known as muscle contracture; however, the mechanism remains unclear. The purpose of this study was to clarify the mechanism governing muscle contracture in rat soleus muscle by identifying changes in ankle joint mobility, insoluble collagen concentration and type I and type III collagen isoforms following 1- and 3-week immobilizations. Following a 1-week immobilization, range of motion (ROM) of dorsiflexion declined to 90% of the control value; additionally, ROM dropped to 67.5% of the control value after a 3-week immobilization. This finding suggested that ankle joint mobility decreases in conjunction with extended periods of immobilization. Insoluble collagen concentration in soleus muscles, which was unchanged after 1 week of immobilization, increased 3 weeks after immobilization. These results may be indicative of collagen fibers with strong intermolecular cross-links contained in the muscle was made increased relatively by 3 weeks of immobilization. Therefore, the change in intermolecular cross-links may be significant in terms of progress of muscle contracture with longer periods of immobilization. On the other hand, the ratio of type III to type I collagen isoforms in muscular tissue increased following a 1-week immobilization; moreover, this ratio remained constant after 3 weeks of immobilization. These data suggested that muscle immobilization may induce type III collagen isoform expression. The increase in the ratio of type III to type I collagen isoforms do not change in parallel with the increase in the limitation in ROM; however, this phenomenon probably is not closely related to the progress of muscle contracture. The change of collagen isoform in immobilized muscle may be involved in the mechanism governing the progression of muscle fibrosis.     

Acoustic characteristics of Ni–Nb–Zr–H glassy alloys by ultrasonic shear waves

The propagation characteristics of shear horizontally polarized (SH) waves passing through (Ni₄₂Nb₂₈Zr₃₀)_100–x H_x (x = 0–15.2) glassy alloys were investigated as a function of hydrogen content. With an increase in hydrogen content, the propagation time and main frequency of the receiving waves show increase and decrease, respectively, indicating expan‐ sion in average atomic distance which comes from solution of hydrogen. In sharp contrast to crystalline alloys, the decrease in damping ratio and the delay in phase with increasing hydrogen suggest a strong settlement of hydrogen into four‐coordination sites surrounded tetrahedrally by four Zr atoms and the resulting increase in dynamic elasticity, respectively. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Low temperature dependence of elastic moduli and internal friction for the glassy alloy Zr55Cu30Al10Ni5

Longitudinal and transverse wave velocities, eight kinds of elastic parameters, and dilational and shear internal frictions of Zr₅₅Cu₃₀Al₁₀Ni₅ glassy alloy were simultaneously measured as a function of temperature in the range from 77 to 373 K, using an ultrasonic pulse method. The inflections at around 150 K for wave velocities, anisotropy factor and Poisson's ratio, and the 150 K peak of shear friction seem to correspond to one topological change (pseudo‐transition) associated with an interatomic readjustment or vacancy rearrangements. The behaviors from 77 to 125 K and 125 to 373 K are due to thermal relaxation of squeezed free volumes and entropy elasticity associated with vibrational motions of clusters, respectively, accompanied by an increase in atomic distance. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

2D molecular square grid of Cobalt(II) with tridentate phenylglycinate and mandelate: structure and magnetism

The hydrothermal synthesis, single crystal X-ray structures and magnetic properties of two layered cobalt-carboxylate complexes, _∞²[Co^II(O₂C^∗CH(OH)C₆H₅)₂] (1) and _∞²[Co^II(O₂C^∗CH(NH₂)C₆H₅)₂] (2), where O₂CCH(OH)C₆H₅ is mandalate and O₂CCH(NH₂)C₆H₅ is phenylglycinate, are described. Pale pink crystals of 1 and 2 were obtained by the reaction of cobalt nitrate and the enantiomer-pure acids at 120 °C. In each case, the structure consists of stacks of quasi square-grid polymeric sheets consisting of carboxylato- bridges, M-O-C-O-M, and the presence of both d- and l-enantiomers of the ligands segregated on each face of the layer. The ligands exhibit both chelating and bridging functions with the carboxylate group adopting an anti-anti mode. The magnetic properties are characteristic of weakly interacting paramagnets where the moments are elevated by an important orbital contribution via spin-orbit coupling.     

Aharonov–Bohm oscillations observed in nanoscale open-dot structures fabricated in an InAs surface inversion layer

We fabricated nanoscale open-dot structures in an InAs surface inversion layer using an atomic-force-microscope oxidation process. Due to its superior nanofabrication capability, small open-dot structures with the feature size ranging between 100 and 300 nm were successfully fabricated. The magnetoresistance signal measured at 4.2 K showed reproducible fluctuations and a periodic oscillation component that varies in both amplitude and periodicity depending on the dot size. We show that the period of the oscillations corresponds to that of the Aharonov–Bohm effect and propose that the possible mechanism for the oscillations is due to the formation of a one-dimensional electron channel enclosing the open-dot structure as a result of the electron transfer from the InAs oxide to InAs.     

Measurement Accuracy in Phase-Shifting Point Diffraction Interferometer with Two Optical Fibers

A phase-shifting point diffraction interferometer (PS/PDI) with point sources of two single mode optical fibers has been developed, which will be appropriate for the surface figure measurement of large aperture optics on a sub-nanometer scale. To reduce the measurement error factors, a fiber optic plate (FOP) is used as a projection plane for interference pattern. Errors caused by imperfection of optical alignment, such as position of point sources and tilt of FOP, are minimized by analyzing the measured phase data with an original method. Measurement accuracy in the PS/ PDI is estimated with the interference pattern produced by the two optical fiber sources. If inhomogeneity of the FOP and a systematic error of the PS/PDI are eliminated, the measurement accuracy of the present system is estimated to be less than 4nm P-V and 0.7nm rms, respectively, at a measurement wavelength of 632.8 nm.     

Evolution of the gain extinction ratio in dual-pump phase sensitive amplification

We have experimentally achieved a gain extinction ratio (GER) of 30 dB at 21.75 dBm pump power in a dual-pump phase sensitive amplifier based on highly nonlinear fiber, which is more efficient than what we predict with the conventional three-wave model. We point out that high-order sidebands play a key role. Then we scrutinize the trajectories of the output signal vector in the complex plane with increasing nonlinear phase shift and understand the roll-over behavior of GER versus pump power curve. We found that the phase "flip" of the output signal occurs around the largest GER. Adjusting design parameters, we show how to improve GER.     

X-ray photoelectron spectroscopy characterization of oxidated Si particles formed by pulsed ion-beam ablation

X-ray photoelectron spectroscopy (XPS) is used to probe oxidation states of Si species in particles deposited using a pulsed ion-beam evaporation method. The effects of He ambient gas, ion beam intensity and post-treatments on the oxides composition and oxygen content have been studied. It is found that presence of He ambient gas led to a profound oxidation of Si species as compared to that prepared in vacuum at the same ion-beam ablation energy, i.e. both increase of SiO₂ component and oxygen concentration in the oxides coverage. The deposition in He also resulted in an increase of oxygen concentration even under lower ablation intensity, but a higher Si suboxides concentration. It is revealed that the reaction between Si and O was controlled by the ion beam intensity (temperature of Si plasma) and the gas ambient (collision probability of Si and O species). The difference in structure of oxide layers for samples obtained under various conditions is discussed based on the results of XPS analyses.     

Evaluation of gadoxetate disodium as a contrast agent for mouse liver imaging: comparison with gadobenate dimeglumine

We investigated the characteristics of gadoxetate disodium (Gd-EOB-DTPA) as a contrast agent for magnetic resonance imaging of the mouse liver. Mice were imaged sequentially under isoflurane anesthesia using a T1-weighted, three-dimensional fast low-angle shot (3D FLASH) sequence after an intravenous injection of Gd-EOB-DTPA or gadobenate dimeglumine (Gd-BOPTA), and the time course of the contrast effect was examined. The time course of the contrast effect of Gd-EOB-DTPA was also assessed after intravenous injection under pentobarbital anesthesia and after subcutaneous injection while awake or under isoflurane or pentobarbital anesthesia. Moreover, different doses of Gd-EOB-DTPA or Gd-BOPTA were injected subcutaneously into conscious mice, and the clarity of the liver border was evaluated visually. Intravenous injection under isoflurane anesthesia caused rapid contrast enhancement in the liver with both Gd-EOB-DTPA and Gd-BOPTA, and the contrast effect was 41% stronger with Gd-EOB-DTPA. Subcutaneous injection of Gd-EOB-DTPA caused delayed but favorable contrast enhancement in the liver. Washout of Gd-EOB-DTPA was faster in mice injected while awake than in those injected under anesthesia. After intravenous injection, washout was faster under pentobarbital anesthesia than under isoflurane anesthesia. The peak liver contrast was 11% and 18% stronger under pentobarbital anesthesia than under isoflurane anesthesia, after intravenous and subcutaneous injections, respectively. Subcutaneous injection of Gd-EOB-DTPA or Gd-BOPTA caused dose-dependent contrast effects in the liver. At a given dose, the contrast effect tended to be stronger and liver demarcation tended to be clearer with Gd-EOB-DTPA than with Gd-BOPTA. In conclusion, intravenous or subcutaneous injection of Gd-EOB-DTPA produces a favorable contrast effects in the mouse liver, indicating its potential in investigating mouse models of liver diseases. The contrast effects vary between conscious mice and anesthetized mice and among anesthetic agents used.     

Pulsed laser deposition of ZnO grown on glass substrates for realizing high-performance thin-film transistors

We report characterization of ZnO thin-film transistors (TFTs) on glass substrates fabricated by pulsed laser deposition (PLD). ZnO films were characterized by X-ray diffraction (XRD), atomic force microscopy and Hall effect measurements. The XRD results showed high c-axis-oriented ZnO(0002) diffraction corresponding to the wurtzite phase. Moreover, the crystallization and the electrical properties of ZnO thin films grown at room temperature are controllable by PLD growth conditions such as oxygen gas pressure. The ZnO films are very smooth, with a root-mean-square roughness of 1 nm. From the Hall effect measurements, we have succeeded in fabricating ZnO films on glass substrates with an electron mobility of 21.7 cm²/V s. By using the ZnO thin film grown by two-step PLD and a HfO₂ high-k gate insulator, a transconductance of 24.1 mS/mm, a drain current on/off ratio of 4.4×10⁶ and a subthreshold gate swing of 0.26 V/decade were obtained for the ZnO TFT.