Noncatalytic kinetic study on site-selective H/D exchange reaction of phenol in sub- and supercritical water

The site-selective H/D exchange reaction of phenol in sub- and supercritical water is studied without added catalysts. In subcritical water in equilibrium with steam at 210-240 degrees C, the H/D exchange proceeds both at the ortho and para sites in the phenyl ring, with no exchange observed at the meta site. The pseudo-first-order rate constants are of the order of 10(-4) s(-1); 50% larger for the ortho than for the para site. In supercritical water, the exchange is observed also at the meta site with the rate constant in the range of 10(-6)-10(-4) s(-1). As the bulk density decreases, the exchange slows down and the site selectivity toward the ortho is enhanced. The enhancement is due to the phenol-water interaction preference at the atomic resolution. The site selectivity toward the ortho is further enhanced when the reaction is carried out in benzene/water solution. Using such selectivity control and the reversible nature of the hydrothermal deuteration/protonation process, it is feasible to synthesize phenyl compounds that are deuterated at any topological combination of ortho, meta, and para sites.     

Chiral zirconium catalysts using multidentate BINOL derivatives for catalytic enantioselective Mannich-type reactions; ligand optimization and approaches to elucidation of the catalyst structure

Catalytic enantioselective Mannich-type reactions of silicon enolates with aldimines were investigated using chiral zirconium catalysts prepared from Zr(O(t)Bu)(4), N-methylimidazole, and newly designed multidentate BINOL derivatives. These new multidentate BINOL ligands were designed on the basis of an assumed transition state structure of a chiral zirconium catalyst derived from two molecules of (R)-6,6'-Br(2)-BINOL. Not only tetradentate BINOL 4 but also tridentate BINOL derivatives were found to be effective, and high enantioselectivities were attained. In a structural study of the most effective zirconium complex prepared from tridentate ligand 6e, several NMR experiments and DFT calculations were carried out. Consequently, the structure of an active catalyst and plausible mechanism of asymmetric induction were elucidated.     

Preparation and properties of aromatic polyamides and copolyamides from phenylindanedicarboxylic acid and aromatic diamines

Aromatic polyamides (aramids) having inherent viscosities of 0.5–1.10 dL/g were prepared by the direct polycondensation of 1,1,3-trimethyl-3-(4-carboxyphenyl)indane-5-carboxylic acid with various aromatic diamines using triphenyl phosphite and pyridine as the condensing agents. Copolyamides were also prepared by a similar procedure from a mixture of the phenylindane diacid, terephthalic acid, and p-phenylenediamine. Almost all of the aramids were soluble in a variety of solvents such as N-methyl-2-pyrrolidone, pyridine, and m-cresol, and afforded transparent and tough films by the solution casting. These aramids and copolyamides had glass transition temperatures in the range of 290–355°C, and started to lose weight at 340°C in air.     

Enantioselective ester synthesis in the presence of optically active polymers

Enantiomer-differentiating ester syntheses from acid salts, chlorides, and an anhydride were studied in the presence of optically active polyamines. Enantiomer selection occurred in reactions of a racemic salt with an achiral alkyl bromide and vice versa, which is good evidence of the importance of activation of the carboxylate group by complexation of the counterion and activation of alkyl bromide by the formation of a quaternary salt with polyamine under solid–liquid, phase-transfer reaction conditions. Only small optical activity was observed in the products of acid anhydride or chloride with alcohol.     

Motor protein nano-biomachine powered by self-supplying ATP

A new nano-biomachine has been created from microtubules (MTs) and hetero-bifunctional polymer particles bearing pyruvate kinase, which is propelled on glass surfaces coated with kinesin by use of self-supplying ATP.     

Convenient synthetic routes to α-oligosiloxanylacrylonitriles

Novel 1,4-elimination reaction of C,N-bis(trimethylsilyl)-C- trimethylsiloxymethylketenimine and retro Diels-Alder reaction of 2-oligosiloxanyl-5-norbornene-2-carbonitrile cleanly gave α-oligosiloxanylacrylonitriles in excellent yield.     

Calculations on the competition between association and reaction for C3H(+) + H2

A potential energy surface has been calculated for the competing associative and reactive ion-molecule processes involving the reactants C3H(+) + H2. Our ab initio results show that the linear ion C3H+ and H2 can directly access the deep potential well of the propargyl ion H2CCCH+, which is calculated to lie 390 kJ mol-1 below the zero-point energy of the reactants. Isomerization between the propargyl ion and the lower energy, cyclic C3H3+ ion, calculated to lie 501 kJ mol-1 below the zero-point energy of reactants, can subsequently occur via two pathways. One of these pathways involves a transition state lying 22 kJ mol-1 below the energy of the reactants while the other, which occurs at much lower energies, involves two transition states and an intermediate. The dissociation of c-C3H3+ into c-C3H2(+) + H is calculated to occur directly, without any intermediate potential energy maximum, but the energy of the products lies 7.3 kJ mol-1 above the energy of the reactants. Using the minimum energy potential pathway and properties of the stationary point structures determined via ab initio methods, we have calculated both the association rate coefficient to produce C3H3+ as a function of density and the branching ratio between the propargyl and cyclic structures of the ion. Our results are in good agreement with some experimental results and in conflict with others. Specifically, we agree with the 1:1 branching ratio measured for the propargyl and cyclic isomers of C3H3+ at 80 and 300 K and we agree with the rate coefficient for radiative association measured at 80 K. We cannot reproduce reported measurements that the reactive channel (C3H2(+) + H) is the dominant channel at 80 K and at low gas densities, or that the association channel at high densities saturates at an effective rate coefficient well below the Langevin value -2x10(-11) cm3 s-1 at 300K and 1x10(-10) cm3 s-1 at 80K.     

Search for a simpler synthetic model system for intramolecular 1,3-dipolar cycloaddition to the 5,6-double bond of a pyrimidine nucleoside

In search for a simpler model system for the study of intramolecular thermal reactions between the base and 5'-functionalized sugar moiety in nucleosides, 1-(3-azidopropyl)uracil (2), 1-(4-azidobutyl) pyrimidines (12 and 13) and 1-(5-azidopentyl)-uracil (14) was synthesized through the corresponding ω-benzoyloxy-(6,7 and 8) and ω-hydroxyalkyl-pyrimidines (9,10 and 11). Heating 2 gave 1,N⁶-trimethylene-6-aminouracil (4), while heating 12 and 13 gave N¹-C₆ cleaved addition products. 15 and 16, respectively. 15 was regiospecifically transformed to 1,2,3-triazole derivatives, 17,18 and 19. Heating 1-(4-azidobutyl)-5-bromouracil (20) yielded 3,9-tetramethylene-8-azaxanthine (22). 9 with NBA gave 1,0⁶-tetramethylene-5-bromo-6-hydroxy-5,6-dihydrouracil (24) and the 5-brominated analog of 9 (25). The 4-functionalized butyl side chain proved to serve as a substitute for the 5'-functionalized sugar moiety in pyrimidine ribonucleosides.     

A practical fluorous benzylidene acetal protecting group for a quick synthesis of disaccharides

A new fluorous benzylidene acetal protecting group was regioselectively introduced into carbohydrates, deprotected under acidic conditions, and reused. Oligosaccharides were synthesized via regioselective conversion of the fluorous acetal group to the benzyl group by traditional reaction conditions. The fluorous compounds were easily separated from non-fluorous by-products by fluorous solid phase extraction.     

Theoretical study of molecular conduction: I. Effective Green's function based on perturbation theory

There have been many experimental and theoretical studies on molecular conduction, as it is a fundamental parameter in the study of molecular‐scale electronics. We have investigated the features of molecular conduction using a Green's function method, which has often been used to solve problems in quantum transport and is also effective in elucidating electron transport in molecules. We have obtained the novel effective Green's functions, including the first‐order energy corrections, by accommodating the self‐energy of the electrodes as perturbation terms. Although these approximate Green's functions only provide information on the first‐order energy corrections, they can involve the elementary properties of molecular conduction. We propose a scheme for the analysis of the relations between molecular orbitals and their roles in molecular conduction and present analytical calculations for normal and cyclic polyenes. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006