Polymerizability of unsaturated monomers capable of forming stable radicals

Some unsaturated monomers bearing hindered phenol and arylamine groups capable of forming stable radicals were prepared. Radical polymerizations of vinyl monomers having such groups were investigated with the use of azobisisobutyronitrile, benzoyl peroxide, cumene hydroperoxide, and tetraethylthiuram disulfide as initiator. Polymerizations of these monomers went normally only when azobisisobutyronitrile was used as initiator. The other initiators inhibited polymerizations remarkably or completely. The results suggest that radicals resulting from benzoyl peroxide and cumene hydroperoxide or tetraethylthiuram disulfide abstract hydrogen of the phenol or the amine to produce the stable radicals, thereby inhibiting the polymerization. Meanwhile, carbon radicals resulting from azobisisobutyronitrile add selectively to the vinyl double bonds of the monomers to initiate the polymerizations. The vinyl derivatives as well as allyl derivatives and cinnamic acid derivatives copolymerize easily with conventional monomers such as styrene, maleic anhydride, and butadiene, again, only when azobisisobutyronitrile was used as initiator. Antioxidative properties for styrene copolymers and butadiene-styrene copolymers incorporating the hindered phenol monomers were investigated.     

Surface magnetism of β-FeO(OH) by Mössbauer spectroscopy

Fine particles of -FeO(OH) were prepared using the⁵⁶Fe isotope and the surfaces of the particles were coated with extremely thin⁵⁷Fe(III) layers. Mössbauer results show that the Fe(III) ions in the top surface layer are involved in the magnetic order and occupy two kinds of surface sites. Both of the two exchange field at surface sites, estimated from the temperature dependences of the hyperfine fields, are smaller than the bulk value. The decrease of exchange fields at the surface sites corresponds to the reduced number of neighboring magnetic ions at each site.     

Thermal degradation of poly[(tetramethyl-p-silphenylene) siloxane]

For the purpose of studying the mechanism of thermal degradation of poly[(tetramethyl-p-silphenylene) Siloxane] (poly TMPS) a series of polymers with silphenylene and siloxane bonds in the main chain were prepared and subjected to thermogravimetry (TG) and pyrolysis study. Analyses of products from poly TMPS degradation (in vacuum at a constant temperature) by gas chromatography (GC), infrared (IR), nuclear magnetic resonance (NMR) spectroscopy, and gas chromatography-mass spectrometry (GC–MS) revealed that degradation occurs at the silphenylene bonds. The TG curves obtained in He for heating rates of 1,2,2.5,7.5, and 10°C/min were analyzed by the Ozawa method; activation energies of 39 ± 1 and 45 ± 2 kcal/mol were obtained respectively for the initial cleavage of the methyl side group and the later-stage scission of the main-chain silphenylene bond which leads to a major weight loss. The results agree with those obtained for other structurally similar polymers.     

Microwave spectroscopic study on the molecular structure and the quadrupole coupling constants of thionyl chloride

Microwave spectra of thionyl chloride, SO³⁵Cl₂ and SO³⁵Cl³⁷Cl, in the frequency range 8–25 GHz have been analyzed. The rotational constants have been obtained from the low J transition frequencies. The r_S coordinates of Cl atoms and the r_o structure have been evaluated with some assumptions: r(S-O) = 1.435 ± 0.011± Å, r(S—Cl) = 2.072 0.005 Å, ∠ OSCl = 108.00 ± 0.06°, ∠ ClSCl = 97.15 ± 0.30°. Nuclear quadrupole coupling constants have been obtained for the SO³⁵Cl₂, species: x_aa = ?25.02 ± 0.04 MHz, x(_bb = ?0.25 ± 0.04 MHz, X_cc = 25.27 ± 0.08 MHz, and X_zz = ?96.75 MHz. The values obtained are compared with those of other workers.     

Cationic polymerization behavior of hydroxystyrenes

Solution polymerizations of o-, m- and p-hydroxystyrene with boron trifluoride etherate were investigated. The results of infrared and ultraviolet spectroscopic investigations of the polymers thus obtained indicate that p-hydroxystyrene polymer consisted mainly of the structure formed through the normal vinyl polymerization mechanism, whereas o- and m-hydroxystyrene polymers contained considerable portions of the structures due to the reaction of the vinyl group with the phenol nucleus. The rate of polymerization and the intrinsic viscosity of the polymer decreased in the order p-hydroxystyrene ? o-hydroxystyrene > m-hydroxystyrene. It was of interest that on the cationic polymerization only p-hydroxystyrene gave polymer of high molecular weight. Plausible polymerization mechanisms were considered. Solid-state polymerization of p-hydroxystyrene at solid carbon dioxide temperature with the use of boron trifluoride etherate was also investigated. Appreciable polymerization occurred only at fairly high catalyst concentrations.     

γ-Ray-induced polymerization of α-haloacrylic acids

The γ-ray induced polymerizations of α-chloroacrylic acid, mp 66°C, and α-bromo-acrylic acid, mp 72°C, were investigated in the temperature range from 35°C to 85°C. An analysis of polymerization kinetics was made, and results were similar to those reported in the literature for other vinyl monomers. On heating of the polymer obtained, elimination of hydrogen halide takes place, and intramolecular lactone formation is observed. The rate of lactone formation of poly(α-chloroacrylic acid) obtained in the solid-state polymerization was found to be higher than that in the liquid state, because a highly isotactic configuration of polymers, tends to be formed in the solid-state polymerization, and elimination of hydrogen chloride is facilitated with an isotactic 5₂ helix structure.     

The passivation phenomenon of platinum in fused lithium chloride + potassium chloride eutectic: Part II. Chlorine overpotential and superpassivation of platinum

Platinum is known to have a very high chlorine overpotential, about 0.8 V, in fused lithium chloride + potassium chloride eutectic. The high overpotential can be ascribed to the formation of the thick passivation film of platinum chlorides. The high chlorine overpotential was decreased by the addition of alkali metal oxides and a reversible chlorine evolution was revealed in a similar manner as the graphite electrode. The reversible chlorine evolution was ascribed to the formation of the oxide passivation film. The chlorine overpotential at the oxide film was increased stepwise as the applied potential was made more positive. The stepped transitions of the chlorine overpotential was ascribed to the valence change of the oxide film. Platinum shows a typical N-shaped passivation at +0.65 V versus Ag/AgCl(0.1) which has been ascribed to the dissolution of platinum into Pt(II) ions and following formation of the passivation film of supersaturated Pt(II) chloride. Platinum was found to show another passivation phenomenon at high temperatures, above 450°C. The N-shaped current-potential curve was observed at +1.8 V which was far more positive than the potential of the standard chlorine electrode. The dissolution of platinum prior to the passivation was found to occur due to the formation of high valence platinum ions such as Pt⁶⁺ and Pt⁸⁺.     

Abnormal Li diffusion in β-LiGa by the formation of defect complex

The diffusion coefficients of Li in the NaTl-type Li intermetallic compound of β-LiGa have been measured by using a short-lived radioactive diffusion tracer. As the tracer, the α-emitting radioisotope of ⁸Li delivered as the energetic and pulsed beam from Tokai Radioactive Ion Accelerator Complex (TRIAC) was implanted into the β-LiGa compounds with the composition in the range of about 43 to 54 at.% Li. By analyzing the time-dependent yields of the α-particles measured according to the repetition cycle of the beam, the tracer diffusion coefficients were extracted over the wide range of Li composition. Abnormal composition-dependence of Li diffusion coefficients in β-LiGa was observed; the stoichiometric β-LiGa showed the highest diffusivity of Li. By referring to the composition-dependent diffusivity of Li in the iso-structural β-LiAl and β-LiIn, we could identify the abnormal diffusion of Li in very Li-poor composition of β-LiGa. The anomaly has been discussed qualitatively in terms of the formation of defect complex and the interaction between the constitutional defects.     

Study of the thermal degradability of poly(α-methylstyrene) with modified end groups

To induce degradabilities in polymers in response to environmental conditions, endm odification reactions of poly(α-methylstyrene) (PMS) derivatives were carried out. 2-Phenylallyl halide derivatives such as 2-phenylallyl bromide, 2-(p-tolyl)allyl bromide, and α-trifluoromethylstyrene were found to be suitable end-modification agents. For example, the ω-2-phenylallyl-PMS derivative was prepared with almost quantitative functionality by the reaction of the living PMS derivative with 2-phenylallyl bromide. In a similar way, ω-3,3-difluoro-2-phenylallyl- and ω-2-(4-toly)allyl-PMS derivatives were synthesized. Based on thermogravimetric analysis, the onset of the degradation temperature of the endmodified PMS derivatives decreased in the following order: ω-hydrogen- > ω-3,3-difluoro-2-phenylallyl- > ω-2-phenylallyl- > ω-2-(p-tolyl)allyl-PMS. Actually, the onset temperature of ω-2-(p-tolyl)allyl-PMS derivatives was 50°C lower than that of ω-H-PMS derivatives. These results indicate that the active species is produced effectively at the endunsaturated bond, which initiates depolymerization of the polymer at rather low temperatures. Therefore, it is concluded that a 2-phenylallyl substituent at the end of the PMS chain induces effective degradation through a radical mechanism.     

Synthesis and reactions of optically pure cyclohexyl(o-methoxyphenyl)phosphine-borane and t-butyl-(o-methoxyphenyl)phosphine-borane

Cyclohexyl(o-methoxyphenyl)menthyloxyphosphineborane and t-butyl(o-methoxyphenyl)menthyloxyphosphine-borane were prepared from dichlorocyclohexylphosphine and t-butyldichlorophosphine by successive treatments with (−)-menthol, o-methoxyphenylmagnesium bromide, and borane-THF complex. The separated pure diastereomers of each of the compounds underwent reaction with lithium naphthalenide to afford optically pure cyclohexyl(o-methoxyphenyl)phosphine-borane and t-butyl(o-methoxyphenyl)phosphine-borane, respectively. These secondary phosphine-boranes reacted readily with various electrophiles in the presence of bases with virtually net retention of configuration. A new chiral phosphine ligand, (S,S)-1,2-bis[cyclohexyl(o-methoxyphenyl)phosphino]ethane was synthesized via the optically pure phosphine-boranes.